Consumers today are trying to cut firewood on an industrial or household scale with the help of chainsaws, which can be considered modern and highly efficient equipment. When purchasing such a device, it is necessary to pay attention to the features, specifications, as well as the manufacturer.
Chainsaws "Taiga" today are not so common, but you can consider as an option these units, which will be discussed below. Like chainsaws of other companies, the ones mentioned above are divided into:
- professional;
- semi-professional;
- household.
The latter are used in conditions of country houses. You can work with them up to 40 minutes a day, this indicates that the resource is quite small. But such equipment is easy to control and does not cause strong vibrations. Chainsaws "Taiga" are able to work up to 8 hours a day, in this case we are talking about semi-professional models that are used for sawing wood, as well as felling small trees. With the help of professional models, you can work twice as long, while the conditions can be the most difficult.
The advantage of these devices is their relatively low cost, and units have been developed for the harsh Russian climate. The ratio of power and weight is the main factor when choosing a chainsaw . With the increase of the first parameter, the weight will increase, which leads to increased complexity in work. Therefore, before purchasing equipment, you should choose the best option for yourself.
Characteristics of a chainsaw brand 245 from the manufacturer "Taiga"
Considering the Taiga chainsaws, you should pay attention to the 245 model, which is semi-professional equipment with a large weight of 8.95 kg. The tire has a length of 40 cm, which is quite enough for sawing 30-cm logs. The device works due to a two-stroke engine, whose power is 2.6 kW, or 3.5 liters. from.
You may also be interested in the chain pitch, which for this equipment is 9.3 mm. In the fuel tank you can fill in gasoline, the volume of which will be the limit from 0.7 to 0.8 liters. Such Taiga chainsaws can easily handle the preparation of firewood, pruning branches, and also felling small trees.
User's manual
The Taiga chainsaw, the characteristics of which were presented above, is equipment that should be used exclusively for its intended purpose. Before starting work, it is necessary to remove grease from the external surfaces, parts and assembly units. Use for this should be a rag soaked in gasoline. The candle is also washed in gasoline, and then dried and wrapped in a cylinder bore.
Re-preservation of the chainsaw in the cold season should be carried out in a room where the temperature varies from +15 to +20 ° . If the temperature drops below the recommended values, the preservation grease will be thickened, and work will be difficult.
"Taiga" - a chainsaw, which should be operated subject to security measures. They say that maintenance should be carried out only in a specially adapted place, it can be a well-equipped workshop. In order to reduce the effects of vibration, the total operating time should not exceed 208 minutes. To refuel the chainsaw and rest, you must regularly stop the equipment.
Technical characteristics of a chainsaw brand 214 from the manufacturer "Taiga"
This tool has almost the same characteristics as the above model. The power remains the same, and the weight is 8.8 kg. The chain pitch is 9.3 mm, and the fuel tank is designed for the same volume. The tool has a 38 cm working machine, and equipment can be used for domestic purposes or in construction conditions.
Technical characteristics of the TBP-4000 tool
After you become familiar with the features of some models, you may also be interested in Taiga products. Chainsaws of the aforementioned brand have a higher power, which is 5 liters. s., or 4 kW, while the weight is only 5.5 kg. Such an advantageous combination of weight and power allows the operator to quite easily perform complex work when sawing firewood and felling.
In the fuel tank you can fill 0.55 liters of gasoline. You can start the device manually, it has a 45-cm tire, and the chain pitch is 0.325 inches. The manufacturer took care of its customers and provided the device with an anti-vibration system, which simplifies the work. Among other things, the unit has protection against kickback, which minimizes the possibility of injury.
User's manual
The Taiga chainsaw manual also contains information on how to start and stop the engine. To do this, the tool should be given a stable position, and then strengthen the gas stick with a special button in the center position. The cold start lever extends to the operator to failure, after which the ignition switch is set to the “Off” position.
While holding the tool with the left hand by the handle, the toe of the right foot must be stepped on the side of the rear handle. With his right hand, the operator should pull the starter handle until it engages with the flywheel. Then the cord is pulled sharply. This operation must be repeated until the first flash occurs in the engine cylinder.
The cost of spare parts
If you purchase a Taiga chainsaw, parts for it may be needed during operation. For example, a steering shock absorber will cost 196 rubles, while a starter drum costs only 80 rubles. An additional shaft has a price of 134 rubles, but a silencer costs 224 rubles. You can get electronic ignition for 548 rubles, a piston pin lock for 200 rubles.
Conclusion
On sale you can also find the 52cc model, which is semi-professional equipment and has advantages over the above models. Power is 2.8 kW, but the weight is much less, it is 5.5 kg. This indicates that the equipment will be controlled much easier. Before choosing, you must decide what kind of load will be placed on the equipment, only this way you will not overpay for professional equipment, the weight of which is quite impressive.