Does your child want to make DIY plasticine crafts? Or maybe you are going to do the handicraft? In this article you will find ideas of different difficulty levels. Someone can laugh, well, what kind of adult will sculpt from plasticine? But there are many such people. Modeling calms nerves and develops imagination. Therefore, if you are drawn to plasticine, do not hold back, do it.
Lamb
This is one of the simple DIY plasticine crafts . Even a child can make a sheep. There is nothing complicated here. Step-by-step instructions in the pictures are presented above. The first thing to do is to roll the face of the animal. It should be an oval. The body is also an oval, but of a larger size. Legs are four sausages. We glue the parts together and a little knocking blank on the table so that the bottom surface of the toy becomes flatter and therefore more stable. Now you can start making wool. It is done in two ways. First, you roll the balls, and then make a depression in each of them. The second way - you roll thin sausages and twist them with a snail. We make wool and cover it with a sheep. Only the front of the muzzle and paws should be left intact. From black plasticine you need to mold the hooves. These will be four ovals, in which a deep groove is made by the stack, dividing the geometric figure into almost two parts. Glue the hooves to the legs. From white plasticine we make droplet ears, from black we roll balls-eyes. The lamb is ready.
Princess
These cute plasticine figures are made according to one principle. Princesses differ only in hairstyle and accessories. We will make such figures on a shell. It will become the basis, and at the same time the lower skirt. We will start production from the head. Roll up a ball from beige plasticine. In places where the eyes will be, deepenings should be made. Now you need to build a hairstyle from sausages. It should alternate short and long strands. You can leave your hair loose or tie it in a braid or ponytail. Now we begin to make a skirt. We mold five identical leaves from plasticine. Fasten them to the top of the shell. Now you should roll up three thin sausages - this will be the sleeve. We make a hand, and in order not to sculpt a brush, we hide it in our hair. Remains the decor. You can make a bunch of flowers for the princess or just beautifully decorate the leaves-skirt. Lastly, we are working on the face.
Snail
A handmade craftwork made of plasticine can be cute. In life of a snail, few people are touched, but their decorative figures look great. This animal has an interesting shape, it is easy and pleasant to decorate. Making snails should begin with the body. Roll gray plasticine onto some coarse cloth. This is necessary so that the relief is imprinted on the material. Now cut out the contour of the body. Then you should roll an uneven sausage from white plasticine. On one side it should be thicker, on the other thinner. Now you need to roll it into the shell and stick it to the base. It remains to decorate the snail. From red, yellow and white plasticine we sculpt the petals, and then we collect them into flowers. We supplement the pattern with green material. We spread leaves and twigs. Black flagella should be drawn to the snail's face.
Husky
Even a child can create such a dog from plasticine. The step-by-step process of work is given above. It should be guided in the manufacture of toys. Let's get started. We will begin to make a dog from plasticine with a muzzle. We roll the gray ball, and then complement it with white details. These will be triangles, an oval for the muzzle and another oval for the nose. Also, the mouth should be fashioned separately. Now go to the body. We roll a white oval, and then paste gray overlays on it. One of them will adorn the back, and four others will adorn the paws. Now you should roll the front and hind limbs from the sausages. It remains to detail the dog. We glue her a black nose and eyes, and then a pink tongue.
Hedgehog
Plasticine figures do not have to be complex. You can make a cute hedgehog from a large, but easy-to-perform amount of parts. Where to start? The first step is to roll the ball. It will become the basis of the hedgehog. Now you should make a triangular face. It must be well attached to the body so that the borders of the gluing are not visible. Now we make the lower legs. These will be two flattened ovals. The front legs are two balls on which two cuts are made. Ears can be made from flattened ovals, one side of which is cut off by a stack. Now it's time to make pink linings. You can mold them manually, or you can cut out thinly rolled plasticine from a layer. Decorate the face with three balls. Two of them will be eyes, and the third will be the nose. It remains only to make needles. We take the brown plasticine, warm it in our hands and begin to make cones. They can be glued not one at a time, but in whole batches.
Angels
Plasticine dolls are different. In this case, there will be not a whole figure, but only the face of an angel and his pens. But this craft still looks very impressive. How to create it? We take a beige plasticine and roll an oval from it. Now you should make the relief of the face. We make hollows under the eyes, give relief to the cheeks and “open” the angel’s mouth. Now you should stick the nose and ears. And you need to do this so that the transition remains smooth. We sculpt two handles with droplets. Now, from a brown or any other plasticine, you should make a hairstyle. You can form it from curls of sausages, as well as cut from the reservoir. It remains to make surprised eyes. We stick two black dots, and in them we glue two white highlights. Now very thin sausages should outline the cilia and eyebrows. Wings should be cut from white plasticine. If desired, feathers can be embossed on them.
Panda
One of the most exciting activities for children is modeling from plasticine. This may not be just a hobby. In the future, it can develop into a profession. For example, a child may become a ceramist or an artist of decorative art.
How to make DIY plasticine crafts? We will collect the panda figurine. It can be produced in just half an hour. The first step is to roll up a white ball - this will be the head. Now we make eye sockets, and then we insert black balls into them. Now you should make white eyeballs, and then black pupils. From a white oval we form a pug. And now it is necessary to supplement the muzzle of the animal from plasticine with ears and nose. Getting to the manufacture of the body. White oval - this will be the belly. Now you should glue two black balls and one thick sausage to it. We raise our heads from above, and our panda is ready.
Mermaid
Plasticine dolls can be fun. Especially if you sculpt them on some basis, for example, on a shell. Let's look at how to make a mermaid. First you should roll up the ball - the head. Then we form a hairstyle from thin sausages. To make the mermaid more realistic, her eyes should be inserted purchased. Now you need to draw a mouth and cilia with a thin marker. From thin braids we form hands and body. It will all be sausages, one thicker and two thinner. Now you need to make a tail. We make a thin cone and scatter it over the shell. It remains to make tail fins. They are made in the same way as the leaves of trees. You can depict scales on the tail with the help of stacks.