How to drain the water from the washing machine yourself? Causes of damage to the drainage system

No one is safe from unforeseen breakdown of the drainage system when the washing machine finishes washing, but leaves water in the drum.

With an incorrect response, you can not only flood the neighbors from below, but also get a lot of troubles associated with pouring a large amount of water onto the floor and spoiling the property. Therefore, it is better to know in advance how to drain the water from the washing machine yourself.

How to recognize a breakdown of the drainage system?

To avoid pouring water on the floor, we learn to evaluate the situation, do not open the washing machine until we are convinced of a sufficient spin of the laundry and the absence of water in the drum.

You can determine the failure of the drainage system by the following indicators:

1. The sound has changed, the machine is buzzing, but no transfusion is heard to care for the flow, and water splashes in the drum even after the spin mode.
2. In open cars with a glass sunroof, you can see water, but this figure may be inaccurate. Moreover, if the water is on a par with the bottom edge, then the machine can be safely opened.
3. During centrifuge operation, water is visible and audible at the same time.

We drain the water ourselves

So, you have definitely determined that the drainage system is broken, but there is laundry with a lot of water left in the drum. You immediately have to decide how to drain the water from the washing machine.

In this case, you need to act according to a certain scheme.

1. We disconnect the car from the power supply.
2. We prepare a container for collecting water, put the floor rags with good absorbency at its base. The drum can hold up to 30 liters of water.
3. Water is drained from the washing machine using a filter. A filter is a round hole that is most often located in the lower right corner. Sometimes the filter is closed with a false panel, in which case we first remove the panel, and then turn off the filter. It should be unscrewed carefully, without sudden movements and efforts.
4. Water immediately begins to flow out. We collect it with improvised means - you can substitute a basin or small low dishes, and after collecting, pour water into buckets. If you have parquet, laminate flooring, you will need to immediately wipe the floors as best as possible.
5. You can also drain the water from the washing machine by unscrewing the drain hose from the siphon and lowering it into the prepared container - a bucket, bathtub, basin.
6. After thoroughly collecting water, open the machine and pull out the laundry. Now it will have to be pressed manually, but this is only a minor nuisance.
7. After all the actions, it is worth making a decision about calling the master or self-repair.

Causes of damage to the drainage system

Sometimes the damage to the drain is insignificant, and it is eliminated in just 10 minutes. Therefore, it is still worth inspecting the car before the arrival of a specialist.

Here are the main causes of disruption to the drain:

1. Sometimes the reason lies in an incorrectly set command on the control panel, for example, the phrase “turning off the machine with water” or the like. First of all, double-check the settings.
2. The pump drain filter is clogged - this is due to small items and objects getting into the hose. How to inspect the pump and clean it is indicated in the instructions for use of the machine.
3. Clogged nozzle leading to the pump. They may be clogged with sand, thread or small items. After cleaning the handsets, the machine will work in the previous mode, and you will not have to call the master.
4. Technical failures: wear of the bushings, breakage of the motor winding. This reason can be identified by men who are at least somewhat knowledgeable in technology. If a spare part is found to be damaged, it must be replaced by buying a new one in a specialized store. But ordinary users will need a repairman.
5. Incorrect connection of the drain hose to the sewer. In this case, it is better to trust the look of a professional and call him at home.
6. Damage to the pump (pump) is the most expensive of all the reasons that the master will help eliminate. In this case, it is better to buy a spare part in advance.

How to drain water from an old- style washing machine ?

Sometimes the need to drain water arises when washing in old-style cars, because in most houses on the earth there is no sewage, so the owners prefer to use just such cars. Water in them is loaded from above, and drainage is through a hose. With long-term operation, the primitive drainage system does not work, it is almost impossible to purchase spare parts. Then you can drain the water in several ways: through the top, tilting the car; by pump; having scooped up any capacity. As we can see, there are no special problems with such models. However, our grandmothers and relatives often have to advise and help drain the water from the drum of the washing machine.

Tips for housewives

Sometimes housewives do not notice that there is water left in the washing machine. Then the opening of the drum is accompanied by an unexpected surprise in the form of a sudden pouring of several liters of liquid on the floor.

In this case, the main thing is not to panic, but immediately close the drum in order to stop further leakage, immediately wipe the floors, after collecting water in a bucket. After that, we study in detail the question: "How to drain the water from the washing machine?" (earlier in the article). Self-repairing women, no doubt, it is better not to do it. Wizards will do the job quickly and efficiently, and you will save your nerves. Relax, drink a cup of tea, because not every day you suddenly have water left in the washing machine after washing.

Instead of a conclusion

Any problem can be solved, do not get upset over trifles. Proper response and peace of mind will help to quickly resolve the issue of damage to the drainage system. And then you don’t have to wash your hands.