Leveling the floor with a self-leveling mixture significantly speeds up the repair process, since you do not need to install beacons. This procedure is performed quite quickly. It is very important to choose the right mix for leveling. So, there are such substances that are able to eliminate large defects, and there are also those that are intended to correct small surface errors.
It must also be said that leveling the floor with a self-leveling mixture can be draft, finish and special. The first type of solution is used if it is necessary to eliminate significant defects. The fact is that it forms a fairly thick layer. The final mixture should be used only if the surface does not have strong errors. If it is necessary to close cracks or to strengthen certain sections of the floor, then special solutions of increased strength should be used.
There are also single and multicomponent compositions. The first type is easier to use, since it does not require the addition of any other components except water.
Leveling the floor with a
self-leveling mixture is not a complicated process. As for the duration, the procedure can take from several days to 1-2 weeks (depending on the drying time of the selected product). So, first, with the help of a drill with a mixing nozzle, you need to mix the required amount of solution. Before this, the base surface should already be prepared: cleaned, leveled and primed.
Next, the floor is leveled with a self-leveling mixture as follows: the solution is poured onto the base, leveled with a spatula and processed using a needle roller. This is necessary in order to remove air from the substance. Now you should let the floor dry, after which it will be possible to proceed to its finish. In this case, the flooded base should be protected from drafts and direct rays of the sun. In principle, this will not have a special effect on the mixture, but it is better to play it safe.
It must be remembered that the prepared solution should be used within 40 minutes, so you should not knead a large amount.
The leveling of the wooden floor with a self-leveling mixture is carried out in the same way. However, if the base is plank, then all the elements must be firmly nailed. In addition, the surface should be cycled and cleaned of dust. After preparation, you can start pouring.
Leveling the floor with a self-leveling mixture (the price depends on the consumption of material) is the best option for preparing the base for finishing. The cost of the solution ranges from $ 10 per bag weighing 25 kg. The flow rate of the solution depends on how uneven the base is.
In principle, these are all the features of leveling the floor with the mixture presented. It is not difficult to do such a procedure on your own, so you can further save money on work. In order to use the minimum amount of mortar, make a cement screed on the floor . Thus, you can make the procedure as cheap as possible.