To date, everyone is able to purchase a woodworking machine in the house. With it, you can perform many functions. The above devices are able to work safely with plywood, various particle boards and other wood materials. The dimensions of the machines are quite different, as well as in its functional part. The rated power of the devices fluctuates around 2500 watts.
Depending on it, the operating frequency of the model also changes. Many consumers, choosing a machine for the home, pay attention to the range of sawing angles. Also important is the size of the table itself. The depth of cut can be different, and this should be considered.
What is it for?
Using woodworking combined machines, you can engage in jointing at an angle. This process is also called planing. At the same time, the workpiece can be set edge-on.
If the workpiece is small, then it is possible to plan along the edges. Sawing can be done in different ways. In some cases, it is necessary to make it exactly across the fibers. Using the right power tool, changing the position of the workpiece is always possible without problems. Also, this will make it possible to cut wood strictly along the fiber.
Machine tools of the company "Zenitek"
The woodworking machines combined (universal) of this company dimensions are optimal. Many models are ideally suited for joining. The maximum diameter of the cut varies around 250 mm. The depth of cut can be adjusted using the lever. The end mill in all models is installed with a diameter of 12 mm.
The saw table is included in the kit quite comfortable. You can adjust the workpiece on it absolutely calmly. The nominal shaft speed is 7 thousand revolutions per minute. The voltage of the device is on average around 230 V. The protection system in all models is reliable.
Starm Model Reviews
Starm combined woodworking machines have good reviews, and many customers prefer models of this brand because of their ease of use. You can set any angles for cutting. For planing on a plane, woodworking combined machines are ideally suited.
They can also be used for milling, and this should be taken into account. Saw blade guard included as standard. Also in the set to the machine you can find a proppant knife. For transverse sawing wood manufacturers have provided a special retainer. Its angle can also be adjusted. From the knife shaft, the machines have a fence.
Overview of the machine "Pioneer D-300"
The woodworking combined machine D300 in its parameters is quite inferior to modern analogues. This is due primarily to the low power of the device at the level of 1500 watts. In addition, it should be noted that the limiting frequency in the mechanism barely reaches 40 Hz. Thus, in a minute the shaft makes few revolutions.
For cutting wood maximum angle there is an opportunity to set 45 degrees. The diameter of the disk milling machine is a desktop woodworking (combined) machine with 125 mm. The manufacturer has provided a landing hole for it. The planing depth in this model can be adjusted by controlling the lever.
Reviews about the models of the company "Stark"
Many buyers choose woodworking combined machines of this brand because of their high quality. Most models can be used for straight planing wood. Joining a workpiece at an angle can also be performed. Motors are installed only asynchronous type, and their rated power on average fluctuates around 2300 watts.
Protective cover devices are equipped. It is possible to connect the vacuum cleaner to the mechanism, thanks to this the workplace will always be clean from dust. Woodworking machines are powered only from a single-phase network. In a minute, the shaft is able to make more than 5 thousand revolutions. A drill chuck is provided with a diameter of 15 mm as standard. The operating frequency of the device is in the region of 45 Hz.
Features of devices "Gover"
The machines of this company allow you to very conveniently adjust the angle of cut. At the same time, the latches are quite reliable. Due to this, the workpiece can be well fixed during operation. Planing can be done on a plane. For straight planing woodworking combined machines are not suitable. However, edge jointing can be carried out quite qualitatively.
At idle, the shaft makes more than 5500 revolutions per minute. The maximum depth of planing is 3 mm. The length of the knife that comes with the kit is 240 mm. The saw blade, as a rule, has a thickness of 1.8 mm. Of the shortcomings, the noise of the instrument should be noted. At a distance of 10 meters, the device produces an average of 89 dB.
What are the features of the Jet machines?
Motors in all models are single-phase. Working capacitors in them are a series of "C6". The rated voltage of the models fluctuates around 230 V. The deviation in this case can reach a maximum of 10 V. The working frequency of the mechanisms is at the level of 43 Hz. The dimensions of the tables are very diverse.
You can adjust the position of the workpiece using the holders. A protective cover is installed in the woodworking machines. The range of cut angles of the workpiece ranges from 0 to 45 degrees. The diameter of the landing hole is 30 mm. In turn, the thickness of the disk cut is 10 mm. The depth of cut in all models can be adjusted.
Corvette Model Parameters
Models of the indicated brand are most suitable for milling. Planing wood on a plane can be done. Additionally, woodworking machines in domestic conditions are often used for longitudinal sawing of workpieces. You can do it by the corner, or edge. The rated power of the models is around 2450 watts. Motors are mounted on frames of exclusively asynchronous type.
At idle, the shaft is gaining momentum quite quickly. The maximum depth of planing of wood is 3 mm. The saw blade in the kit is turned on with a diameter of 250 mm. You can connect a vacuum cleaner to devices. In this case, dust is immediately absorbed during operation.
Russian manufacturer "Energomash"
Many woodworking machines (combined) for a house of this brand differ from other devices in their performance. This is largely due to the installation of additional plain bearings. Spacers in a woodworking machine are able to provide rigidity for fixing the workpiece. A security system is installed in all models. At the slightest malfunction in the mechanism, the blocker is triggered instantly.
The lower frame in the machines is welded, and it is distinguished by increased reliability and is able to withstand heavy loads. The accuracy of wood processing is ensured by the holders. Their angle can be adjusted by changing the position of the lever. Milling work can be performed on a wide variety of machines. For planing at an angle, the models of the above company are well suited. Additionally, in domestic conditions, it is possible to easily engage in both longitudinal and transverse cutting of the workpiece.
Woodworking machines "Titan"
The maximum planing width of the models of this company is on average about 200 mm. The depth range can be adjusted from 0 to 5 mm. The diameter of the saw blade is a maximum of 200 mm. The end mill is set to 12 mm and the bore of the saw blade is 32 mm. Dimension tables exist the most diverse.
The rotation of the knife shaft can be carried out with a single lever. Motors in all models are provided by the manufacturer asynchronous type. Capacitors in them are marked "C6". The rated voltage of the power tool fluctuates around 200 V. The operating frequency indicator is at the level of 30 Hz.
Reviews about models "Caliber"
Many buyers choose household combined woodworking machines of the specified company due to their multifunctionality. Work on them can be performed in a wide variety of ways. A protective cover is provided in all models by the manufacturer. For dust removal, the vacuum cleaner can be connected to the mechanism. The drill chuck is supplied with a diameter of 15 mm as standard. Engine power fluctuates around 2500 watts on average. At idle, the drive shaft makes more than 5 thousand revolutions per minute.
At the same time, wood processing accuracy is ensured by high. You can adjust the cut angle in all models. Table holders are fixed very firmly. Due to this, the workpiece can be installed in almost any position. There is a mechanism for changing the cutting angle, and protective guards are included in the standard set. As a result, we can say that the models of this brand are equally effective in coping with planing, jointing, and also sawing wood.