Before you buy a gasoline generator, you must decide what kind of load is supposed to be placed on it, and also what equipment is needed for. If the power supply is short-term under conditions of disconnection of the centralized power supply, it is important to consider that it is better to purchase a device that is not designed for long-term operation. It will cost much cheaper.
It is also important to calculate how many consumers you will connect at the same time. Experts advise you to think about whether the unit will be installed permanently or if you want to move it from place to place.
As for the purpose, the gas generators are domestic as well as professional. The power of the former does not exceed 4 kW, while the latter have the mentioned parameters up to 30 kW. In order to make a choice, you can consider at least one of the models. A great example would be the Kipor IG2000.
Reviews on the main features of the model
The aforementioned generator is an inverter type device, which is a single phase installation. According to consumers, it acts as an excellent source of backup power supply. The current reaches 7 A. The equipment operates due to a four-stroke engine with an upper valve arrangement. Consumers emphasize that the device has a single-cylinder engine with manual start.
Technical Specifications Reviews
The capacity of the Kipor IG2000 fuel tank is 3.7 liters. The engine capacity is 105.6 cm 3 . According to customers, fuel is consumed very economically. This parameter reaches 0.67 l / h. It is important to mention also the overall dimensions, which are equal to 515x300x430 mm.
When consumers consider the Kipor IG2000 generator model, they especially note that the battery is not included. The volume of the oil tank is 0.4 liters. The device weighs 22 kg. Power is equivalent to 1.6 kW. Customers do not like the fact that the device does not have control automation.
The design provides inverter voltage control. There is no fuel level indicator in the unit, like handles, as well as wheels. It holds 0.4 l in the oil tank. The noise level during operation of the Kipor IG2000 reaches 59 dB. Customers like the fact that the device provides for an oil sensor. This feature simplifies operation.
Positive feedback
Before making a purchase, it is recommended to get acquainted with the opinions of consumers about the described model. According to them, the equipment has many advantages, among them are:
- the presence of a control panel;
- convenient transportation;
- overload protection;
- compact sizes;
- the ability to connect time-consuming electrical equipment;
- efficient cooling system.
As for the control panel, the Kipor IG2000 generator is intuitive and serves to control the operation. Convenience of transportation is guaranteed by a convenient handle that allows the user to move the device from place to place. Additional advantages are an efficient cooling system and a reliable engine.
The device is protected against overcurrent. When the oil level is low, the unit shuts down, the first change should be carried out after 10 hours. Fuel, according to customers, is spent very economically.
User's manual
The Kipor IG2000 petrol generator should be used in accordance with the manufacturer's recommendations, which you can find in the instructions. Having familiarized with it, you can understand that it is possible to eliminate malfunctions independently. For example, when the engine does not start, you must first check the filling of the fuel tank. The engine must have a sufficient amount of oil.
If there is no spark during engine failure to start, replace the spark plug. The equipment does not work even when fuel spills around the spark plug. It can also ignite. To verify this fact, remove the spark plug cap and free it from dirt. The candle is removed, a cap is put on it. With the electrode side, the candle is mounted on the cylinder cover so that there is contact. Next, pull the starter cord so that a spark appears.
In the instructions for the Kipor IG2000, you can also read the safety recommendations. For example, the manufacturer advises to be careful when operating the equipment, because the exhaust contains poisonous carbon monoxide. In this regard, the generator should not start in a cramped room. If the equipment will work inside the building, it is important to ensure good ventilation.
The device should be monitored during operation. The muffler will heat up when the generator is operating. After stopping the engine, do not forget about it. It is important to prevent contact with this part of the device while the assembly remains hot. The engine should be left to cool before storing equipment.
The Kipor IG2000 inverter generator has an exhaust system that heats up during operation and maintains high temperature after the engine stops. In order not to burn yourself, you should pay attention to the warning signs on the label to the generator.
Change of oil
Reviews of the Kipor IG2000 suggest that from time to time you will have to change the oil. It is necessary to drain it from a warm engine in order to carry out the work completely and quickly. Before this, the fuel tank cap lever and the engine start key must be set to the OFF position.
The screw loosens, allowing you to remove the side cover. The oil filler cap is removed. Dirty oil is drained into a container. Instead, use the recommended mixture. It is poured to the desired level, which should be checked. The next step will be the installation of the left side cover, the screw must be tightened.
Air cleaner check
During operation, the operator will have to check the element of the air purifier, which will ensure that it is clean and in good condition. The screw loosens, then the side cover is removed. The lid clamp must be pressed. This will remove the cover and check the air cleaner. If necessary, it and individual elements are changed.
Finally
Gasoline generators are selected taking into account power. This characteristic is one of the main ones. Installations up to 1.5 kW are suitable for mobile use. But in order to provide electricity to a country house, it is best to purchase equipment up to 4 kW. Installations are usually used in industry, the power of which varies from 5 to 15 kW. Such devices are also suitable for seasonal cottages, where energy is needed.
For intensive use, generators with a power of 15 kW or more are purchased. They are operated in residential buildings and industrial buildings. To calculate the power of the device, it is necessary to calculate the number of connected devices, the starting current coefficient of each model, as well as the power of the latter.