Building a house is always a responsible matter. If a tree is chosen for the construction of a dwelling - logs or glued beams - then it must be borne in mind that this material is very moisture-resistant. The impact of external precipitation on it leads to a change in the geometry of the wood, fungi and signs of decay may appear. The best option is to protect the home from the outside.
In order to maintain a cozy atmosphere and comfort in it, you need to take care of which one to choose insulation for the walls of a wooden house. The consumption of firewood or gas for heating will also depend on its quality. With the most optimal option, their volume can be significantly reduced. The material must be non-combustible, resistant to moisture. It must maintain thermal insulation properties over a long period of use.
Insulators for the walls of a wooden house come in two varieties: organic and inorganic. They belong to different price categories, and the choice largely depends on the needs of the builder. Working with bulk materials will take longer than with their tiled forms. The first option requires a good tamping, as it is able to sag. As a result, voids may form. Regions where the winter is not so harsh and the temperature is not lower than -20 °, they prefer to use insulation for the walls of a wooden house in two ways: it is either slag or expanded clay.
When covering the dwelling on the outside with mineral wool, the use of bars for its fastening will be required. If you decide to carry out the operation from the inside of the house, then you need to consider that in this case the usable area of the rooms will be reduced. For this option, sheets of mineral wool are suitable, which can be used together with heat-reflecting material. For fastening the structure, a metal profile is used, made to install drywall. Its dimensions will depend on how thick the insulation for the walls of the wooden house is chosen by you. Mineral wool can be seventy-five by fifty millimeters or 100 by 50 millimeters. The profile is attached to the wall above and below, then the same - vertically. Between them, a distance of 600 to 800 millimeters must be observed. This parameter depends on the width of the drywall: the plates must be positioned so that their border is in the middle of the width of the metal structure. Sheets of mineral wool are laid between the profiles and fastened with screws.
A high-quality universal insulation for the walls of a wooden house is foam glass. The material is not toxic, not combustible. It has a low coefficient of thermal conductivity, almost equal to zero moisture and vapor permeability. It does not develop fungi, it is resistant to microorganisms and insects. In addition, foam glass is reliable and suitable for long-term operation.
Before using insulation for a wooden house, it is necessary to provide waterproofing of the walls. Last of all, they need to be sheathed with siding. If all operations are performed in compliance with the necessary requirements, then the home will certainly be cozy and warm.