Greenhouses are used for low heat-loving garden crops. With all the variety of design options, the principle of creation is the same: a frame is installed, a translucent covering material is put on it. The main requirements for greenhouses are simplicity, durability and ease of maintenance. Manufacturers are constantly introducing something new in terms of improving the design. The Fazenda greenhouse recently appeared on sale is no exception. Customer reviews speak of its popularity.
Elements of the greenhouse "Fazenda"
The design of the greenhouse uses modern durable materials. Outwardly, it looks like similar devices, but it has its own characteristics.
Arcs
The main elements of the frame are arcs. As a material, an HDPE pipe is used, which has been serving for many years. Lightweight and durable plastic is easy to process and bend. For the manufacture of arcs, the PND pipe is considered one of the best materials. It is not subject to corrosion, decay, destruction in the cold and deformation in the heat. Painting the arc does not require. The frame can be left to winter without disassembly.
Covering material SUF-42
For shelter in a greenhouse, a non-woven fabric with an UV stabilizer is used. Porous material is produced in Germany. It passes air and moisture well.
An important indicator for covering material is its density. The table shows the properties of the canvas SUF-42 depending on the density.
| Density, g / m 2 | Protection |
42 | From medium frosts |
60 | From frosts to -5 0 |
80 | From frosts to -10 0 |
If the density of the material is less than indicated in the table, it will not protect against frost, and its strength will decrease. It is difficult to work with too thick material, because it does not fold well and clips do not hold it.
Pegs
Serve for fixing and tensioning the greenhouse. When buying, you should pay attention to their length. Too short do not hold the greenhouse, and it does not withstand the wind well. The ends of the pegs should have notches for reliable fixation in the ground.
Clips
The clips are used to fix the covering material on the arc in a certain position. They are small plastic clamps worn on an arc over agrofibre. The design of the clip has not yet been finalized. With a weak pressure, it flies, and with a strong one, it tears the canvas. When buying a greenhouse, it is advisable to purchase spare clips.
The device of the greenhouse "Fazenda"
The design is thought out to the smallest detail. The greenhouse is fully equipped, and you do not need to purchase anything extra. The arcs are sewn into the covering material with a strong thread. Pegs and clips are included. The greenhouse is pre-assembled, packed and enters the trunk of a passenger car.
The minimum length is the greenhouse "Fazenda" 4m. Reviews say that it fits even on a small bed, and it’s convenient to use it.
How to set a greenhouse
The Fazenda greenhouse is conveniently assembled together. This is done as follows.
- It is necessary to prepare an even bed for the greenhouse, dig it up, make the necessary fertilizers and materials to improve the soil structure.
- Carefully open the original packaging and get the greenhouse.
- Insert the pegs into the holes at the ends of the arcs.
- Stretch the greenhouse over the garden bed and fix the clips on the ends of the arches.
- Install the ends of the greenhouse with the tension of the canvas by sticking the pegs in the ground.
- Install the internal arcs, fixing them in the ground in the same way.
- Insert the end pegs and attach the covering material to them, slightly pulling it.
To service the Fazenda greenhouse, a shelter is raised and clamped on one side. After work on the garden, it returns to its original position in the reverse order.
Greenhouse "Fazenda": reviews
Reviews regarding the greenhouse "Fazenda" are contradictory. Obviously, this is due to the conditions of its operation and the skills of consumers. Most note compactness, lightness, ease of installation and use of the greenhouse.
The structural strength is affected by the absence of a longitudinal pipe, which should create rigidity. With a strong wind, the arcs go with a shaker. At the same time, it breaks off the clips and it is necessary to press the agrofibre with additional loads at the edges.
Clips constantly fly off and are lost. Therefore, many find suitable fasteners for downpipes or office paper clips. In places of pressing to arcs, the covering material wears out faster, it lasts for a short time.
In general, there are positive reviews about such a product as the Fazenda greenhouse. It corresponds to the average level, but the price of it, according to many, is overstated. At the same time, it is worth noting original solutions in the design that attract buyers.
If you focus on the price of the greenhouse "Fazenda" 6 meters, reviews say that it is more profitable to take it than a 4-meter one. Prices are very close, and 2 meters of covered ground will never be superfluous.
Absolutely identical products are produced under different names, for example, the greenhouse "Agronomist", "Fazenda". Reviews and descriptions speak of the same design.
Here, even the density of the covering material is 42 g / m
2 . With a large selection, cheaper greenhouses can be preferred.
How to make a greenhouse yourself
The Fazenda greenhouse is easy to make with your own hands. PND pipe is sold in bays and it can be bought by measuring the desired length. Then a template is made of wire and all segments are cut on it per 1 m step. The length of the greenhouse is 4, 6 and 8 m.
At the base, the pipe is mounted on a metal rod clogged into the ground, or buried deeper. Upstairs, a crossbeam is passed and fastened over the entire length. Due to this, the design will turn out to be more firmly branded. To prevent sagging of the agrofibre, the arcs are interconnected with twine. In this case, it is necessary to provide that it does not interfere in the future caring for the garden.
If you are unable to obtain reliable clips, cover material should be laid over the frame and leave an allowance on each side for pressing with a load.
The best solution is to nail a long rail to the edge, on which you can later wind the canvas.
An option with clips is also possible. It is only necessary to flash the covering material so that arcs can be inserted into it at a distance of 1 m from each other. If it is possible to find separately components, then, according to user reviews, the clips of Bashagroplast showed themselves well.
Conclusion
Greenhouse "Fazenda" customer reviews characterize as a mid-range product. He has a high price, but other models in this regard are also no better. With certain skills and desire, you can make a greenhouse like "Fazenda" with your own hands.