If you ever had to choose glue for solving everyday problems, then you must have heard about such a product, which is called "Poksipol." This composition is a two-component mixture that does not contain solvents. It is represented by a paste-like consistency in the form of epoxy glue, which can be used to connect different elements, as well as fill in bumps, voids and cracks.
Description
Poxipol glue is an epoxy mixture that can be used to quickly glue different materials. Within just 10 minutes at room temperature, a chemical reaction will occur that begins after mixing two equal parts of the components offered for sale. This composition is able to act on a dry and clean surface that is free from oil and grease.
The mixture is intended for:
- ceramics;
- metal;
- glass;
- rubber;
- fiber concrete;
- concrete;
- hard plastics;
- wood.
However, the manufacturer does not recommend gluing polyethylene, teflon and polypropylene with this composition. In order to achieve a better result, the surfaces are pre-sanded, but they can be roughened by any of the available methods. Poksipol glue has unique characteristics; after applying the prepared mass, its solidification can occur even under water. If you have to work with complex surfaces such as copper, stainless steel, ceramic tiles, bronze or galvanized steel, then at the first stage you should apply a thin layer of contact adhesive, which does not contain toluene. The mixture must be allowed to dry for half an hour.
Composition
Quite often, ordinary consumers and specialists are interested in what ingredients two-component adhesive “Poxipol” consists of. In the package you will find two tubes, one of which is filled with epoxy resin , a filler and a rheological modifier. Whereas the second is a mercaptan resin, which in the process of preparation is supplemented with a tertiary amine, filler and rheological modifier.
Instructions for use
It is very simple to use glue epoxy "Poksipol". To work with it you will not need special knowledge and skills. The surface at the first stage must be cleaned of dirt and dust, freed from foreign objects, and then treated with a mixture of mold and mildew. In the next step, according to the instructions, mix the components, depending on the existing conditions.
Application of the solution should be carried out only on that surface, which should be attached. Elements are strongly pressed against each other and held for 2 minutes. Poxipol adhesive, the use of which is described in the article, will completely harden after 12 hours. However, if you trust the reviews, then the surface should be left at rest for 24 hours. After the transparent composition has solidified with the elements, you can do anything, for example, drill, grind or paint. As practice shows, the resulting connection is much stronger than brick and concrete.
Tips for using glue effectively
If you decide to purchase Poxipol adhesive transparent, then you must follow the recommendations of specialists. From them you can find out that until the mixture has completely hardened, its surface can be leveled with a spatula or knife, which are wetted in water. The caps from the tubes cannot be interchanged.
If the liquid in the tubes is slightly hardened, then the packaging should be slightly heated to level it. To mix the solvent and resin, use a container that will not be a bad idea to throw away afterwards. Shiny and smooth surfaces must be cleaned before use. After completing the manipulations, you should wash your hands in a soapy solution, since the composition is capable of irritating the skin.
Consumer Reviews
Glue can be applied with a layer of any thickness, while it will not expand or contract, as well as deform. There are no solvents in the composition, and if the application was carried out on a vertical surface, the mixture will not drain, which greatly simplifies its use in various conditions.
As buyers emphasize, the glue is resistant to oils and moisture. After hardening, the surface can be drilled, sawed and ground with simple tools. Depending on the area of use, the composition is resistant to water. Bonded surfaces can undergo temperatures up to 120 ° C. You can use glue to repair mechanisms and cars, sports equipment, toys and furniture, as well as utensils. Using it, you can fix door hinges, tool handles and more. Domestic craftsmen advise using Poxipol to seal leaking pipes, tanks, metal products, as well as oil, gasoline and water tanks.
What else you need to know about glue
Poxipol glue should be prepared according to the instructions in such quantity that will be enough to connect the elements. Users are not advised to "grind", the minimum amount of cooked mass should not be less than a cubic centimeter. It is important to observe the proportions one to one.
When gluing, there is no need to use a press at all, the parts to be glued are not detonated, they should be left in a resting position. If you want to reduce the polymerization time, you need to leave the elements at a higher temperature. Already an hour after applying the adhesive, the surfaces can undergo grinding, sawing and drilling. Before using glue, mix the components thoroughly. It must be remembered that the transparent adhesive "Poxipol" acts as a dielectric.
Conclusion
On sale you can find transparent and metallic glue of the brand "Poksipol", each of which has a slightly different mixture lifetime. In the first case, it is necessary to develop the composition within 4-6 minutes, while the second - within 3-5 minutes.