Due to neglect of the temperature, very often a plaque forms on the surface of the soleplate of the iron, which interferes with ironing and leaves dirty marks on clothes. Before operating the appliance, you should always read the instructions. It should be remembered that wool is best ironed through wet gauze, and for synthetics or silk, do not set the temperature high. If a raid has already appeared, then the question arises of how to clean the iron at home from the burn so that it is as good as new.
Basic cleaning methods relevant for all irons
The simplest and fastest method for cleaning surfaces from plaque is a special pencil. It is only necessary to heat the iron and smear its sole with this product, after a while the pollution will begin to melt. The surface should be wiped with a dry cloth, and when the iron cools down, rinse with clean water to get rid of the residues of the chemical reaction. The pencil has a pungent odor, so you should clean it in a well-ventilated room, and then wash your hands.
A very effective way to clean your iron at home is to use regular hydrogen peroxide. The procedure is carried out with gloves, it is necessary to moisten a cotton swab in the solution and wipe the sole with it. From carbon deposits, a hydroperite tablet also helps. It emits a strong unpleasant odor, therefore, having learned such a method as cleaning the iron at home, and deciding to use it, you should first go outside with the appliance. A tablet should be taken on dirt on a preheated sole, let it cool and wipe with a damp cloth.
How to clean the teflon sole of the iron?
Fresh plaque can be removed using ordinary soap. To do this, heat the device, rub it with a product and leave to cool. Then use a damp soft cloth to wipe the sole from the soap. Removes dirt and vinegar. It is necessary to heat the iron to maximum temperature and grease its surface with a cotton swab dipped in table vinegar. The holes are wiped with cotton buds. To make the device shine clean, you should iron the unnecessary cotton cloth, all the dirt will remain on it. How to clean molten polyethylene at home? Use a cotton swab moistened with nail polish remover to wipe the dirty sole.
How to get rid of rust on the sole of the iron?
Many housewives are interested in the question of how to clean the ceramic sole of the iron from rust. In some cases, use a cleaner "Silit". To do this, the household appliance heats up, turns the sole upside down, and the product is applied directly into the holes. After 10 minutes, dirt will come out of the holes, which must be collected with a clean sponge, wash the surface and wipe it with a dry cloth. For this purpose, water with an antiscale, calculated at 0.5 tsp per 250 mg of water, is also suitable. The solution is poured into an iron, which is then heated. The scum will lag in half an hour. To prevent rust from appearing, you should use
distilled water when ironing
, not the
water that flows from the tap. It does not form scale inside the appliance due to its chemical properties.