The Polaris company in the Russian market exists more than 19 years. This company is mainly engaged in the manufacture of water heaters. However, on the shelves in the stores you can also find small household appliances of the specified trade brand. The Polaris company began to produce conditioners and climatic devices not so long ago. The first models of water heaters were released in 2000. This company today is able to boast a really large assortment. Polaris water heaters are manufactured in Italy, China, as well as Russia. However, the main factory is located in Israel.
What makes the Polaris model more remarkable?
Heating elements in all models are installed only tubular type. Due to this, the tank is heated quite quickly. The rated power of water heaters depends on the size of the model. The maximum temperature may also vary. If the tank has a shut-off type, then the pressure is maintained by the system significantly.
When it comes to closed modifications, there this indicator is usually at 5 atm. The mode of accelerated heating of water is present in almost all models of the early and late series. Tank cover may vary, but most often manufacturers use stainless steel. When installing the device, problems rarely arise, the buyer can choose for himself vertical as well as horizontal modifications, based on his preferences.
Overview of the Polaris RMPS50 Model
This Polaris water heater (50 liters) is capable of boasting a maximum power of 5 kW. He picks up a maximum temperature of 60 degrees in about 52 minutes. The heater in the tank is installed a standard tubular type. Problems with it arise quite rarely; it has excellent quality. Among the shortcomings, a low marginal pressure indicator should be noted.
If the pressure in the water supply is large, then the nozzles may be damaged. All this should be considered by the buyer when buying this model. Of the positive aspects, it is important to note the acceptable dimensions of the device. In installation, it is quite simple, fasteners are applied to the water heater.
Consumer opinion on the water heater "Polaris RZ10"
Many consumers choose this water heater for the crane because of its convenient control. The temperature in it is adjusted using the small controller, which is located at the bottom of the device. Direct configuration is carried out stepwise. In the first mode, which is called economical, the heater works with a power of 3 kW. In turn, the maximum device can reach 5 kW.
The temperature limit in this case will be exactly 70 degrees. The power indicator on the front panel is provided by the manufacturer. The thermometer water heater on the tap has a built-in type with a scale of up to 80 degrees. To protect the tank from overheating, there is a magnesium anode. In some cases, it can break, but such situations arise very rarely among owners. More often, problems with a safety valve are raised. This happens due to power surges.
What is interesting about the FDE50?
The tank system data "Polaris" water heaters have a closed type. This model is designed to warm up 50 liters of water. The rated power of the device is at 6 kW. The maximum temperature gets them pretty quickly, and this is good news. The turbo mode will help the user speed up the heating process. The system pressure is maintained in the water supply at the level of 8 atm. On the inside, the tank is made entirely of stainless steel.
For convenient control, manufacturers have taken care of a simple mechanical regulator. You can monitor the power level using a system of indicators that are located on the control panel. The safety valve in this model is installed quite high quality. There is only one heating element in the system. Pipes for installation are included in the kit of a standard diameter. The thermal insulation system in the water heater is present.
Owner reviews for "Polaris FDE80"
The indicated water heaters "Polaris" reviews are good, many owners have preferred this model because of high performance. There are two direct heating elements in the tank. Due to this, the heating time of water is significantly reduced. For thermal insulation of the system, high-quality polyurethane is used.
Overheat protection in the tank is installed. The flange at the bottom of the structure has a removable type. Given this, it can always be disconnected and cleaned. Serve these water heaters "Polaris" (80 liters) are capable of quite a long time. This is largely due to the presence of a magnesium anode. The outlet pipes in the system, like the tank, are made entirely of stainless steel.
Overview of the Polaris FDRM50 water heater
This water heater is designed for vertical installation. The rated power of the device is at 7 kW. The thermometer is provided by the manufacturer of the built-in type. The system’s power source is a network with a voltage of 220 V. For rapid heating of water in the tank there is an accelerated mode.
The maximum heating temperature, according to the documentation, is 70 degrees. Of the features, a reliable protection system should be noted. It makes the device safe for human health even with large power surges in the wiring. There is also protection against leakage and overheating. The standard set includes the following: a Polaris water heater, instructions and fasteners with connecting pipes.
"Polaris FDRM80": specifications and reviews
The maximum power of these Polaris water heaters is 4 kW, and the nominal voltage is 220 V. Of the positive aspects, it should be noted the fast heating time of the water. The feed system is installed quite high quality, problems with nozzles do not arise. Any person can adjust the power regulator. To control the heating there is a thermostat.
You can monitor the operation of the device by the display system. The pressure of the water heater in the pipe is able to keep high. The tank is coated on the inside with an extra layer to protect it from corrosion. The piping in this model is provided for the bottom. This water heater is installed on the wall, and for mounting, all parts are included in the standard kit.
Parameters of the Polaris P100 model
The rated power of these Polaris water heaters is 4 kW, and the maximum frequency of the device is 45 Hz. The system’s power source is a network with a voltage of 220 V. Deviation is a maximum of 10 V. The modes in the water heater can be changed using the regulator, which is located at the bottom of the device.
The dust protection class is available in the IP24 series. All internal elements of the high humidity system are not afraid. All wiring inside is protected. There are two heating elements in the tank. They are made in the model entirely from copper with an anti-corrosion coating. A magnesium anode is also used to protect them. Directly, the tank is made of stainless steel as standard, and the temperature controller is mounted open.
Customer Reviews for the Polaris P80
Many customers choose this Polaris instantaneous water heater for its high power. For a large family, it fits well, but can be used in the country. The anticorrosion properties of the model are quite high. You can adjust the temperature smoothly. Also, according to the display system, it is possible to monitor the operation of the device. To save energy, the Polaris instantaneous water heater must be turned off for a while. Otherwise, the cost of electricity will be prohibitive, this should be considered.
If we consider negative reviews, then some owners complain about the contamination of the pipes. Experts believe that this problem is associated with surge protectors, which are located near the thermostat. When they become contaminated, untreated water enters the tank on the heating tube element. In this case, the anti-corrosion layer is not able to protect it for a long time. You can solve this problem simply by periodically cleaning the surge protector. To do this, remove the cover at the bottom of the water heater and remove the magnesium anode. Only then can you check the status of the surge protector and then take some kind of decision.
Features of a water heater "Polaris PS50"
The specified storage water heater "Polaris" is in high demand on the market. Most people prefer it because of the simplicity of the design. You can install it in almost any apartment, it takes up little space. Management is the simplest, and it’s impossible to precisely regulate power. However, the display system is installed, you can use it. The heating element in this modification is present alone. Its maximum power is at around 4 kW.
The economy mode in the system is provided by the manufacturer. The maximum water heater voltage is maintained at 220 V. Deviation is allowed only 10 V. Thus, a high device is not able to withstand the load. In general, the supply system is installed quite high quality, the pipes leak very rarely. The protection unit is conventional with thermal insulation. The temperature controller is located in the lower part, like the power controller.
Interesting model "Polaris FDRM30"
This electric water heater "Polaris" is able to boast of an AB 2.0 protection system. If the water supply is somehow interrupted, then it will be impossible to turn on the heating element. This water heater has a self-diagnosis system. In addition to protection against overheating, a mechanism from freezing acts. The tank’s pressure can withstand just colossal - at the level of 16 atm.
The temperature sensor in the device is installed in the TC2 series. It differs from other devices with high measurement accuracy. The accelerated heating mode is available. The maximum operating temperature of the device is at 75 degrees. The tank in this case is made of stainless steel. In turn, the nozzles are plastic. The safety valve in the system is installed one and the limit pressure is kept at 13 bar. The standard device kit includes everything you need to install equipment.