Chainsaws of the Huskvarna trademark are among the three most common models in Europe and the CIS countries. As for the specific model of "Husqvarna 142", the characteristics of which will be described in the article, it is listed in the category of devices of the household group, but according to its features it is suitable for semi-professional specialists. The product has a design that is developed on the basis of the classic layout using engineering and assembly technologies.
When the development of the model was carried out, the technologists focused on increasing the comfort during operation, the safety of various types of work, as well as extending the life of the most important components and parts.
Specifications
"Husqvarna 142", the characteristics of which are pretty good, belongs to the class of household tools designed for sawing wooden materials. A distinctive feature is the affordable price, combined with impressive features.
The equipment operates due to a two-stroke air-cooled motor. Power here is 2.58 liters. sec., which is equivalent to 1.9 kW. The working volume is 40 cm 3 . A fairly important characteristic is the ignition system. This is a capacitor device. The distance between the electrodes is 0.5 mm.
Among the main characteristics of "Husqvarna 142" it is necessary to highlight the capacity of the fuel compartment, which is 0.37 liters. Recommended gasoline - high octane unleaded. The ratio of gasoline to oil when preparing the mixture for refueling is 50 to 1. As for the chain lubrication system, this is a capacity of 0.19 liters. The cutting headset is a tire with a length of 15 inches, which is 38 cm. The chain pitch is 0.325 inches.
additional characteristics
You may also be interested in the ergonomic features of the Husqvarna 142. So, the level of noise emitted during operation varies from 98 to 108 dB. The final value will depend on the measurement methodology. Without a chain and a tire, the chainsaw will have a dry weight of 4.8 kg. If we analyze the characteristics, then we can note three main features. Among them is enough power for a home appliance. If we analyze professional units of the same manufacturer, then they have an average capacity of about 20% more.
Is gas quality important?
Another feature is the cutting headset, which can be easily replaced. In addition, you may also be interested in the fact that the supplier company focuses on the fact that the device is not too demanding on the quality of gasoline. The minimum allowable octane number is not specified. From this we can conclude that the characteristics of the Huskvarna 142 chainsaw; suitable for craftsmen who plan to operate the tool in the country, as well as specialists who are involved in tasks of a semi-professional scale.
Management Review
In this matter, the described chainsaw is a classic minimum. The controls are represented by a switch, which can be translated into one of two positions. It should also highlight the lever position of the air damper. It can be installed in one of three positions. After inspecting the housing, you will notice a throttle control lever. It is combined and has a stopper. The explanation here requires only a leak. There is a stable position between the open and closed shutter positions, which will correspond to the shutter half open. This applies to the carburetor flap. This position is necessary when the cold motor is turned off after jerking by the starter when the shutter remains closed.
Some features
Looking at the technical specifications of Husqvarna 142, you can understand that it does not have a primer. The fuel is pumped for the first time using the starter handle. This has both a minus and a plus. The latter is that reducing the number of nodes leads to a decrease in the number of breakdowns.
Consumer Reviews
Quite an important factor before buying any of these tools is the opinion of consumers. They emphasize that the fuel mixture is often prepared from AI-92 gasoline and two-stroke oil, using the traditional ratio of 50 to 1. If there is no oil at hand, in the indicated ratio it is necessary to add high-quality oil, which is diluted with gasoline in the ratio of 33 to 1. Similar operation permitted only briefly.
Consumers emphasize that during the operation of “Husqvarna 142” for an hour, it can be noted that it is ideally suited as a household tool. There is almost no vibration in the hands, and the noise level is quite tolerable. A pretty important factor is excellent cutting ability. If you take the trunks of dry birch and fresh pine with a diameter of 26 cm, then they can be repeatedly cut in 7 seconds each. If there is such a need for dry oak, it can be cut a little more slowly. A 24 cm log will take about 14 seconds. The cutting speed, as the masters emphasize, is somewhat lower compared to professional chainsaws, which belong to a different order of value.
Additional opinions
The characteristics of the Huskvarna 142 saw allow you to work with it at full power, without fear of overload at high speeds. The brake works perfectly, while the chain stops instantly. If we analyze the reviews of the owners of such chainsaws, using it from time to time and for domestic tasks, we can distinguish the following opinions: the piston group is reliable, the saw is unpretentious to fuel and quite comfortable, the tire is very strong. Failure, however, can happen, but such troubles are rare, and are due only to the onset of the replacement of consumables. Such a nuisance with “Husqvar 142” can also occur with errors made at the time of preparation of the fuel mixture.
Carb Adjustment
Setting up a chainsaw is very simple. To do this, you will need to perform several steps. To begin with, the engine is regulated for smooth operation at low speeds. Then the carburetor must be configured to supply the fuel mixture at maximum speed. In addition, you will need to adjust the carburetor to idle and check the device in all modes. Such manipulations are carried out after the engine has warmed up a bit.
Use for this you have 3 screws. The one indicated by the letter T is responsible for tuning in idle mode. With screw H, you can adjust the operation at maximum speed, but you can adjust the mixture to form a mixture at low speeds with screw L. The fuel mixture can be depleted by tightening the 2nd and 3rd screws, the speed will increase.
If the carburetor is not adjusted, and start-up is not possible, the adjustment starts with screws L and H. They must be set to the standard setting. After that, the engine starts and remains until heated. At the next stage, you can begin to configure the low speed mode. Optimal engine operation can be achieved by using screw L and idle screw T. For this, the 1st screw is screwed to the maximum engine speed, and then released by a quarter. The second screw to the norm can be brought idle. As soon as the work is adjusted on the bottoms, it is possible to adjust the thrust and adjust the maximum speed. To do this, screw H is slowly tightened, and the revolutions can be checked with an electronic tachometer.
Chain characteristics and reviews
If you know the characteristics of the Huskvarna 142 chain, then first of all you should pay attention to the step, which is 0.325 inches. The chain thickness is 1.3 mm. Lubrication eliminates chain overheating and accelerated wear. Lubrication is carried out automatically, which applies to the tire. At idle, oil is not supplied, which contributes to economic consumption.
If you notice that the chain is not lubricated at working speeds, the reason here lies in the oil pipe, which can be clogged with sawdust. The defect can be eliminated by cleaning this unit. The specifications of the Huskvarna 142 chainsaw are outstanding. But this device has its drawbacks. Among others, consumers highlight the absence of a gear stop, which is necessary for fixing the unit when cutting round timber. In addition, there is no visual control over the fuel level, which also applies to chain oil.
The buyers consider the drawback a not-so-convenient chain-tightening scheme. You should not use an expensive carbide chain for sawing oak, as then you may encounter problems with sharpening it.
Chainsaw device
You should know the specifications and design of the Husqvarna 142 if you plan to purchase such equipment. By design, such units belong to the classical mechanisms. The tool is driven by an internal combustion engine. The device at the chainsaw is quite simple, which indicates reliability that ensures trouble-free operation even in the most difficult conditions.
In addition to these nodes, the chainsaw has an air purification system, which is fed into the carburetor. It should also be highlighted:
- chain tension mechanism;
- starter;
- saw chain;
- ignition;
- muffler.
The engine is a single-cylinder two-stroke carburetor engine. The engine has high speeds, which imposes the relevant requirements for the oil used in the fuel mixture. The chainsaw also has a centrifugal clutch, which works depending on the engine speed.
The specifications and overview of the Huskvarna 142 will give you a closer look at this device. For example, it is especially necessary to highlight the ignition system. She used to be a contact, but today she is a thing of the past. The described device has non-contact electronic ignition, which saves the operator from the burdensome work of adjusting the clearance in the contacts. You do not have to clean them often.