If you have heard of the Hercules brand, dry mixes from this manufacturer should be known to you, because they are quite common in the building materials market. They gradually displace sand and cement based compositions, with more outstanding performance characteristics. It is very convenient to breed them and work with them. Depending on the destination, Hercules formulations are facing, masonry and plastering.
Plasters and putties
The Hercules plaster mix has increased strength, does not involve the use of putty, after application you will be able to get a glossy surface. You can work with such compositions both manually and by machine application. The composition is well distributed, and then perfectly lends itself to the leveling process. The surface after processing will not be afraid of moisture. Before starting work, you can select the fractional composition to obtain the desired layer thickness.
They have excellent qualities and putties from the Hercules company. Dry mixtures of this kind can have gypsum and do not shrink after application. Packing is very convenient (3-15 kg), which allows you to buy as much material as you need and not overpay for the mixture if its small volume is required.
Masonry mixes
If you need to purchase a masonry mixture from a wide range of products, you can choose a composition with the required qualities. This can be material, for example, with refractory or frost-resistant characteristics of the Hercules brand. Dry mixtures of this type demonstrate excellent stackability as well as ductility. They can be applied to surfaces from almost any material, due to the high level of adhesion.
Compositions for masonry are used in the installation of elevated structures and foundations of buildings. The composition is excellent in soils with normal moisture. When using the composition of the M-100 brand, the consumption will be equal to 1.67 kg per 1 m 2 if the application thickness is equivalent to 1 mm.
Screeds and mixes for flooring
Hercules formulations are often used to level the floor . Dry mortar mixes perfectly on the surface when arranging screeds. For repair work, you can choose floor equalizers, self-leveling powders, compounds for creating screed. It is recommended to choose goods of this brand for the installation of systems based on cement and polymers.
The peculiarity of using the Hercules mixture when leveling the floor
Compositions intended for leveling the floor, involve the use of certain knowledge and experience when working with them. The basis has to be prepared in advance. To do this, remove debris from the surface. Using a solvent, remove paint and oil residues. The floor should be washed and dried well. If there are insufficiently well-fortified elements on the surface, they must be disposed of.
The day before the start of work, you need to close up the seams and joints. Then a primer mixture is applied. If you have to work with a base with good absorbency, then apply the primer should be in 2-3 layers.
Before the process, you need to prepare:
- lighthouses;
- level;
- a piece of chalk;
- cable;
- bucket for mixing mortar;
- primer;
- drill with a nozzle;
- priming roller;
- needle roller.
If you decide to use a Hercules product for repairs, dry mixes from this manufacturer should be applied on beacons. On a rough coating, the highest point of the surface should be determined. You can definitely do this using the laser level, but the traditional building one will do. A beacon should be placed at the peak point. It must be made of reiki. Such beacons are installed at several points around the perimeter of the room. Now you can start pouring the solution onto the floor surface. The layer is treated with an aeration roller, which will eliminate air bubbles. To fill the next portion of the composition begin in 10 minutes. After 20 hours, it is permissible to continue to work with a fully finished screed made of Hercules brand material. Dry mixes are created taking into account the need for quick solidification. If there will be some kind of finishing coating on top, then it should be laid after 2-3 days.
Adhesive compounds and crossings
In the assortment of Hercules materials you can find adhesives for laying porcelain stoneware, tiles and mosaic tiles. After completing such work, you can use the mixture to fill the seams of both facade and floor tiles. You can choose a mixture with the desired color. Stitching will have excellent characteristics, have impressive strength and elasticity. You can lay mixtures on any surface, as they have increased adhesion, protecting the joints from moisture, which is especially true when working outside buildings or in bathrooms. Fungi and mold will not appear on the surface, since antifungal ingredients are included in the grout.
If there is a need to repair the premises, then for the implementation of work in the field of floor, you can purchase the entire product range from one manufacturer. Hercules building mixtures are represented by leveling compounds, adhesives, and grouts.