In order to provide suburban manor houses, private houses and country houses with heat, real estate owners connect gas boilers, they work, allowing to obtain thermal energy for a living room. The continuity of the boiler will be ensured by an uninterrupted supply of electricity, when fluctuations and interference in voltage are completely excluded.
The need to use a stabilizer
A stabilizer for the boiler may be needed in those places where the quality of electricity is very low. If you do not want to face a breakdown in boiler equipment, which will shorten its life, then you should use the above-mentioned element, which allows you to cope with voltage problems. The equipment requires high-quality voltage, only then the automation will work properly, otherwise the control board may fail. The stabilizer for the boiler is able to adjust the voltage and frequency of the current, which allows the systems to work without severe overloads, eliminating their overheating. This system addition is a power supply equipment. Using it, you can solve the problem of voltage drop, this indicates that the problem of uninterrupted heat supply will be solved. If the boiler is connected using a stabilizer, it will operate in an economical mode, which will reduce energy costs.
Stabilizer Market Overview
If you need a stabilizer for the boiler, then you must first deal with the varieties of these devices, which are thyristor, electromechanical or relay. The latter are electronic, they are devoid of a moving part. In this case, many advantages can be distinguished, among them small size, quick response, low weight, and also high resistance to frequent voltage drops. It is worth noting that quick response is very important when using equipment that involves the presence of pumps and engines.
However, such devices have their drawbacks, they are expressed in the audibility of clicks that may occur during the switching of relay ranges. One cannot but note the accuracy, which depends on the number of steps or keys of the autotransformer. Accuracy, which is allowed by state standards and is 5%, is not exceeded by the stabilizer. However, the more transformer windings, the higher the accuracy. In this case, you may encounter the fact that the device is more expensive. Such a stabilizer for the boiler may also differ by flashing lights at the moment when the winding switches.
Overview of Electromechanical Stabilizers
In the operation of such installations, the voltage supply is adjusted by a current-collecting brush. The main advantages are significant accuracy, which is on average 3%, the duration of operation of this type of stabilizer, which depends on the quality of the graphite finger of the current collector. Electromechanical devices are resistant to overloads and have a fairly impressive voltage range.
Cons electromechanical devices
If you decide to choose the stabilizer described above for a gas boiler, you should also know about its shortcomings, among them the need to replace the current collector brush after 5 years should be highlighted. These devices cannot be used at low temperatures. They are characterized by a low response speed, which is unacceptable for household appliances, in addition, the dust that gets inside is charred. You should be prepared for the fact that the device is characterized by open sparking and humming of the motor during the movement of the brush.
Overview of triac devices
If you decide to purchase a stabilizer for a gas boiler, you may prefer triac devices, which are also called thyristor devices. They have advantages that are expressed in high accuracy, excellent response speed and quiet, smooth operation. However, disadvantages should be taken into account, namely the high cost and failure of the board, which requires the need for replacement or reconfiguration.
Manufacturer's Reviews
Having visited the store of relevant products, you can choose a good stabilizer for the boiler. However, at the same time, according to users, it is important to take into account some parameters, namely the electric power, the operating voltage range, as well as the voltage limits. The stabilizers of the Resanta brand are quite common today. Before purchasing them, you need to consider what electrical power is consumed by the equipment. Thus, the boiler needs input power ranging from 100 to 200 watts. Due to the fact that this value may be different for certain brands of boilers, it is necessary to clarify the power according to the product passport.
The manufacturer "Calm", as buyers emphasize, indicates in the passport data a range of operating voltage, which ranges from 210 to 230 volts. For the reason that most boilers are single-phase devices that are designed for a standard voltage of 220 volts, only 10% of the deviation will be enough for the device to fail.
If you are thinking about how to choose a stabilizer, then you should follow the advice of the Mateus supplier, which indicates that voltage fluctuations in the network occur during the day from low to high. That is why, before purchasing a stabilizer, it is important to clarify what is the highest voltage limit. Devices of the mentioned manufacturer, as users say, provide a blackout to the gas boiler when the upper voltage limit is reached.
Varieties of stabilizers according to the installation method
If you want to purchase the best voltage regulator for the boiler, it is recommended to be guided not only by the manufacturer who delivered the goods, but also by the installation method of the device. There are two mounting methods, floor and wall. The latter option is considered more aesthetic, since it is flat in a mounted design. If the device is standing on the floor or on a stand, then this is not always convenient for large sizes. When choosing a stabilizer, you should pay attention to the ease of use and its dimensions. Another stabilizer must be able to cover the voltage range.
If you do not really understand the limits of voltage, then it is best to purchase a device with a wide enough range of voltage changes, this will eliminate the burnout of both the stabilizer and boiler equipment. Consumers note that the 220V stabilizer must be characterized by quiet operation, this will ensure the comfort of its use.
Specialist tips for extending the life of the stabilizer
If you have already decided how to choose a stabilizer, you should worry about what needs to be done in order to extend its life. The cause of the breakdown may be prolonged operation at low voltage, which is 170 V or less. However, these devices may have the ability to undergo a continuous load, which is called the load capacity. This parameter must be specified in the passport. The stabilizer for the boiler, the price of which is 4000 rubles, must remain as long as possible in working condition. To do this, it is recommended to monitor the input voltage, this must be done before you connect a large load. Such actions can save on repairs and the purchase of new, more powerful devices for stabilizing the voltage in the network, which is undesirable for the consumer in terms of money savings.