Of course, it’s better to choose a model of such a device as a gate drive for swing gates and order their installation in professional workshops. Modern modifications of the device are selected in accordance with the specifics of the object, the configuration of the gate itself and the power of work.
The gate drive for swing gates is divided into types and depending on the principle of operation and installation method. Therefore, when choosing, it is advised to pay attention to the technical characteristics of the product.
Krono series from the Italian company Came
Krono Series Cameras for swing gates are robust and protected by an aluminum housing.
It protects the engine from negative influences that provoke system deformation and corrosion. The drive runs smoothly and silently, and the modern capabilities of the mechanism are a guarantee of comfort and ease of use. Automation easily adapts to any architectural forms. The drives of this series have an electric microswitch of extreme positions, which regulates the system of opening and closing the gates.
Ati
The Came series is an electromechanical linear actuator. They meet the highest reliability requirements. The design allows the use of products on large gates. They do not need frequent maintenance and internal regulation. The actuators have limit switches that provide precise control of the sash opening angle. The integrated unit controls the consistency of all functions. A low voltage is required for power. In case of interference, the leaflet speed is controlled automatically.
Fast
The series from the manufacturer Came is designed for swing gates, which are installed in an opening with a width of 4.6 m. The width of the wings should not be more than 2.3 m. The hinged lever is mounted in the drive. It is mounted on columns.
Drives on the automation of this series are easy to operate and install. The design provides an unlocking system (special handle), through which you can open the gate quickly even in the absence of power supply. The handle is protected against breaking.
The control unit manages all operations and adjusts the speed of the gate when opening and closing. The shutters stop or change direction when interference occurs.
Ferni
These models are the best solution for gates weighing from 400 to 800 kg with a leaf length of up to 2 m with large posts. At the same time, the installation distance between the support on which the device is mounted and the axis of rotation of the gate is 380 mm. For power, a low voltage is needed, which allows the user to operate the device intensively. The control unit acts as a regulator of the speed of movement of the valves, clearly regulates the force in the engine. If interference occurs, the movement of the gate changes its direction.
Frog
Automatic drives from the manufacturer Came are applicable for any type of swing construction. Their special scheme allows the gate to work in automatic mode. The models in this series are the best solution for stylized sashes that have an original appearance.
Drives have an underground type of installation. Modern technology used in the development of devices makes them safe and durable. The basis of the mechanism is high quality material. Devices work smoothly and without noise. They are equipped with a manual unlocking system in case of unforeseen situations.
Amico
The Amico series, designed for automatic swing gates, the drive of which is installed in points with a high level of traffic and cargo turnover, is characterized by high functionality. They are applicable for lightweight doors.
Made on the basis of lightweight materials. They are used in industry, in guarded facilities, in offices, parking lots, etc. The operation of devices is distinguished by uninterrupted operation and stability. The devices operate even in severe weather conditions, which provides a clearly thought-out design made of high quality materials. Amico Gate Operators meet all international standards for quality and reliability. They are standardized and very convenient to use.
Nice Moby Series
Any Nice operator for swing gates of the Moby series is used for heavy loads. Depending on the model, they are mounted on gates, the width of which is 3-5 m. The devices are used in a variety of fields, starting from industrial enterprises and pumping into private estates. In this line there are designs with a 24 V motor power supply with constant current supply. They have a built-in magnetic decoder, which makes the device durable with uninterrupted load.
The high resistance of the device to adverse environmental conditions is ensured by a robust drive housing based on polymer-coated aluminum. Structural details made of bronze provide protection, safety and a long service life of the device. The unique design of the device is a smooth and silent operation.
Wingo
Nice Wingo series actuators are also used for swing gates. The devices of this series are mounted on gates weighing up to 400 kg and with a leaf width of not more than 1.8 m (model WG 4000). In addition, the Wg5000 is applicable for gates weighing up to 500 kg. The sash length is up to 3.5 m.
All devices are of the type linear drive for swing gates. They are compact and invisible, therefore suitable for gates with any design.
Pluto
Nice Pluto actuators are designed for gates with a leaf width of 3-5 m (Pluto 4000 and Pluto 5000). These are linear drives with compactness. They are installed on the surface of the wings almost imperceptibly.
All parts that move are made of an alloy of bronze and steel, which is a guarantee of high strength and stability of the product. The drives are distinguished by silent operation and smooth running. This series is intended for frequent use at facilities for various purposes.
Hyppo 7000
In this series, there are two designs for swing gates, the sash width of which is up to 3 m. They are equipped with high racks. Drives of these models are applicable at industrial facilities, as well as in private estates.
- The door operator for swing gates Hyppo 7005 is an electromechanical device with a non-reversible design. Power supply is 230 V with variable current supply. The device contains an integrated limit switch, which is responsible for both opening and closing.
- The door operator for swing gates Hyppo 7024 operates on the basis of electromechanics. It is equipped with a non-reversible drive and an engine with a power rating of 24 V with a constant current supply. This model is designed for intensive use.
Any drive for swing gates outside this series is very easy to install, does not require welding and does not require complicated service. All alloys are based on metal alloys. The device is equipped with a housing that is resistant to damage or shock, so the device is durable and will last quite a long time.
Pop
Automatic systems from Nice manufacturer are designed for wickets, the design of which involves a single leaf. The gates should be light, up to 2 m long. Electromechanical devices, non-reversible, with a hinged type drive. They are used for outdoor installation and do not require complex work and welding. Due to its compactness they can be mounted on any type of columns (167 mm). The motor is powered by DC 24 V. The devices are ideal for a high level of operation.
Intelligent electronics of devices allows you to track any interference in the path of movement of the gate. When obstacles are detected, the sashes are subject to blocking. It is possible to carry out additional equipment with batteries, which makes the design independent of static energy sources.
Metro
Nice's Metro range is presented as a fixture with an underground installation. They are applicable for gates with leaf widths of up to 3.5 m. The series includes four models, including a non-reversible mechanical design, suitable for heavy loads with a 24 V motor power supply with constant current supply. A magnetic encoder is included. In addition, the Metro range includes four drive models equipped with a reinforced foundation box whose wall thickness is 2.5 mm. Its outer layer is made of high quality durable steel. Internal parts are made of bronze. Devices have an unlock mechanism. This is a metal key included with the swing gates.
DIY gate drive
Automatic devices from Italian manufacturers Came and Nice, Russian products from the Dorkhan company have a rather high cost. Therefore, it is worth considering how to make the device with your own hands. So you can save a significant amount. Is it possible?
What do you need?
What do you need to make a drive? It is almost impossible to make swing gates with your own hands , but automation for them is quite. You will need:
- Two activators equipped with anchor type engines. They are mounted on the calculated place.
- The drive is mounted in such a way that the opening angle of the gate is 180 degrees.
- Activators that can ensure the closure of the valves in any situation (if there are no sensors, the speed of movement of the valves will vary).
Do-it-yourself drive for swing gates is not so easy. Therefore, it is still advised to buy and install a factory-made structure on their own.
Installation instructions
Installation instructions assume the following steps:
- Mark the place for mounting the device on the columns in accordance with the dimensions of the installation indicated in the technical data sheet.
- Attach the mounting bracket. The fastening method is selected depending on the material of the column.
- The direct lever is installed and the engine is fixed.
- A curved lever is twisted into place. The front bracket is attached to it.
- The control of the device and the correct functioning of the elements responsible for security and unlocking are carried out.
- The front bracket is secured to the sash by means of screws. For this purpose, two holes are drilled at previously marked locations.
- Limit switches are regulated . Before this, the drive must be unlocked and the gate opened manually.
- Sashes should be completely closed. In this case, the limit switch block must occupy the desired position. The end block screw should be loosened if necessary.
- After the device is blocked, the current is connected. The mechanism is being checked: the gates must be opened and closed several times. If necessary, fine-tuning is carried out, and the screws are tightened.
- It remains to connect the remote control in the form of a remote control with a key fob.