The greenhouse "Botanik" is made gable or arched. The first option can be implemented with glass, but in this case, the weight of the structure increases and the foundation is needed. Cellular polycarbonate may also be used .
Experts advise using it with a larger thickness (6 mm), which increases the strength of the structure.
It is advisable to make the foundation for any greenhouses, since the strength of the structure increases, the internal space increases and the beds can be raised higher.
Cheaper, more economical and easier to manufacture arched greenhouse "Botanic". This results in fewer seams and the design will be airtight. Many people prefer the arch option also due to the ease of installation. It can be put directly on the ground, and it is immediately ready for use.
Gable greenhouse "Botanist"
The advantage of the greenhouse is an aluminum frame on which glass or cellular polycarbonate is mounted. There are galvanized steel structures. They are cheaper, but heavier. The manufacturer notes the sufficient stability of the structure , which can be used for several seasons without modifications and prevention. Two vents provide the necessary ventilation of the greenhouse inside. The difference from other designs is a sliding door. If desired, it can be converted to swing. A gable roof allows snow to crawl without forming a significant load.
With a width of 2.8 m and a height of 2.5 m, the room is quite spacious. The length of the frame can be from 1.8 to 8.73 m. The number of sections is from 5 to 14 pcs., Which provides the necessary structural strength.
Advantages of a gable greenhouse "Botanik"
The design benefits are as follows:
- lightweight high-strength aluminum frame;
- a modern supporting profile that allows you to install automatic ventilation and watering systems, heated lighting, collecting water from the roof, shelves, curtains, plant garter devices;
- elegant look with a large selection of different options (classic, with a vestibule, with elegant shapes);
- new glass fixing system;
- ease of assembly;
- tight sealant.
Arched greenhouse
The Botanic polycarbonate greenhouse is a stationary structure, but it is easy to assemble and disassemble. You can add the required number of sections to it. The multiplicity is 2 m. This will require a minimum amount of material: arches, screeds, fasteners and cellular polycarbonate.
Aluminum is usually used as the frame material, but cheaper steel construction designs can also be found. The arcs are made in the form of a one-piece pipe of square section 20x20 mm. The distance between them is maintained from 0.67 to 1 m. If a region with strong winds and heavy snowfalls, you should choose the minimum step between the arcs. The ends are made mainly all-welded, but different manufacturers have their own technologies. The standard width of the greenhouse is about 3 m and the height is 2-2.5 m.
Greenhouse selection
For arched greenhouses, strength is important. When choosing, you should pay attention to the distance between the arcs, the presence of screeds and reinforcements, as well as the thickness of the coating. In the greenhouse, the house draws attention to the corner of the ramps. It must ensure the sliding of snow.
Often, instead of polycarbonate, a shelter made of polypropylene is sold, the strength and resistance to frost of which is much lower. The reliability of the metal coating of the frame, which must be weatherproof, is important. It makes sense to further strengthen the greenhouse if there is a suspicion of insufficient strength.
Assembling the Botanik greenhouse can be done with your own hands. Manufacturers always provide installation and operating instructions.
Conclusion
When the Botanik greenhouse is selected, it is important to find the right relationship between price and quality. Buying a design in the form of a house or an arch is a matter of taste, technical characteristics and material capabilities.