A garden chopper is an indispensable tool for a gardener and gardener. This device is a metal sheet neatly attached to a wooden pole at an angle of 70-90 °. The edges of the tool are very sharp and can have different shapes. When working in the garden and in the garden requires a variety of garden tools. Choppers can be arched, trapezoidal and even triangular. Most importantly, the tool should be convenient in the process of its use, lightweight, but strong enough.
If desired, such a device can be made independently. It is not necessary to buy special materials and tools in the store for this. A garden hoe can be made from other tools that have become unusable, for example, from a shovel, a hacksaw, or from a regular sheet of metal. The process takes a minimum of time. But at the same time, a reliable tool is obtained, which does not cause special difficulties during operation.
Do-it-yourself garden chopper from a shovel: easy and simple
A garden hoe can be made from an old shovel, which no one is already using, but it is a pity to throw it away. To do this, you will need:
- Emery paper.
- A metal pipe with a diameter of three centimeters and a length of 25 centimeters.
- The handle is made of wood. It is advisable to use a blank of pine, ash or oak.
- Shovel.
- Drill.
- Bulgarian.
- Clamp, bolt or nails.
- Rivets.
Manufacturing process
So, how is a garden chopper made? Most often, broken shovels are used to create. To make the tool convenient, the material must be prepared. To do this, cut off all unnecessary from the blade of the former shovel. To do this is best grinder. You need to remove the upper mounts, as well as 1/3 of the upper edge. All slices should be sharpened well. In addition, the part should be treated with sandpaper.
To make the garden chopper comfortable, you must attach it to the handle. This will require a mounting system. To do this, take a metal pipe and flatten one of its ends. After that, the deformed side must be bent at an angle of 90 °. In this case, certain proportions must be observed. The distance from the flattened edge to the bend should be at least 6 centimeters. On a flat area, two holes should be made. They can be made with a drill and a drill. Exactly the same holes must be made in the upper part of the metal sheet, which used to be a shovel. You can connect the material and the holder with rivets or bolts.
Final stage
The garden chopper is almost ready. It remains to fix it on the handle. To attach the handle, you need to make a small hole in the second part of the deformed pipe. After that, the wooden pole needs to be sharpened. The handle prepared in this way is simply driven into the pipe, and then fixed with a nail. In this case, use a hardware whose diameter is wider than that of the hole.
Hacksaw Garden Choppers
To make a tool you will need:
- Emery.
- Bulgarian.
- Hacksaw.
- The metal pipe.
- The handle is made of wood.
- The corner is metal.
- Rivets.
- Bolts.
- Drill.
How to do
Almost everyone in the household has damaged saws. In many cases, the metal remains sufficiently elastic and strong. It is these qualities that a garden tool should possess. For the manufacture of choppers, you can use the widest part of the canvas with a width of 25 centimeters and a height of at least 8.
First you need to prepare the metal. To do this, from the canvas of the former hacksaw, you need to cut a workpiece of the required size. The edges of the product should be treated with sandpaper. After that, up to 4 holes must be made in the workpiece. In this case, it is worth retreating one centimeter from the edge. The distance between the holes should be the same. The same thing needs to be done on one side of the corner.
In order for the garden chopper to perform its functions well, it is necessary to think through all the fasteners. A metal pipe can be used to connect the saw blank to the wooden handle. One side of it must be flattened. After this, several holes must be made. The distance to them from the edge should be at least 5 centimeters. Exactly the same holes should be made in the second part of the corner.
Putting a chopper
When all the parts are prepared, you can begin to assemble the structure. The tube with the deformed side must be connected to the corner to which the canvas of the old hacksaw or saw is attached. Parts can be fixed with rivets or bolts.
A hole must also be made in the pipe from the second side. It is needed to fix the wooden handle. After that, the stem must be driven into the pipe. Drive a nail into the prepared hole. The garden chopper, the photo of which is presented above, is ready to work.
Sawing teeth is optional. They can be stored at the top of the blade of the finished tool. This will allow you to use it for loosening the upper layers of the soil. If necessary, the corner can be fixed a little lower. In this case, the teeth will protrude a few more centimeters.
Finally
A garden chopper is not just a convenient tool. It is universal. After all, with its help you can weed not only flower beds, but also ordinary beds where vegetables grow. The main thing at work is not to damage the stems and roots of the plants grown. Moreover, the radius of action is determined by the length of the handle. The longer the handle, the less you have to move around.
If desired, you can independently make a garden chopper. This requires a few tools and materials. As a basis, you can use a sheet of metal, an old saw, a hacksaw and even a shovel.