Many are interested in the answer to the question of how to wipe the mounting foam. And this is exactly what we will try to tell in this review.
Foam precursors
Polyurethane foam appeared in the construction industry recently. Earlier, before its appearance, cement and tow were used. This solution was diluted for a long time. In addition, the work also did not differ in simplicity and speed.
Currently, polyurethane foam is used almost everywhere. And not only in construction, but also in repair. Surely many of you have seen a substance sticking out of the cracks, which looks like foam. This is the mounting foam.
The main advantages of the material
The main advantage of this material is ease of use, since there is no need for additional work. In addition, you do not need to purchase and use a variety of mechanical devices. All that is required is the material itself. Implemented foam in specialized cylinders that do not differ in too large volumes. Inside the tank, in addition to the foam itself, there is gas that displaces it. Choose the mounting foam carefully. Some non-bona fide manufacturers may add any unhealthy substances.
Should be careful
When working with polyurethane foam, you must be careful, as the material is tenacious and durable. In the event that you did not succeed in avoiding the hit, you must get rid of the traces of foam as soon as possible. How to wipe the mounting foam? To begin with, the place that was stained will need to be thoroughly wiped with a rag, not smearing, but removing material. Then you need to find the tool with which you can remove the foam. For example, acetone or gasoline.
How to wipe the mounting foam, if these materials are not at hand? You can prepare a special solution. To do this, dilute the salt in water, and then rub the place where the foam got with a pumice or brush. It must be remembered that working with this type of material should be neat. And if you can still remove the foam from the skin, then getting rid of its traces from the hair is much harder. And just cutting off a curl with traces of material is the only option available in this case.
How to wipe the mounting foam? What can be used to get rid of traces of building material?
In that situation, if the foam has completely dried out on the surface of the skin, then the solvents will not help. In such a situation, traces of material can only be removed mechanically. Foam manufacturers also talk about this in the instructions for use. How to wipe the mounting foam from your hands in such a situation? It is necessary to lubricate them with a fat cream in the most thorough way. This is necessary in order to reduce the impact of aggressive material during cleaning. After that, you need to take a stiff brush, apply soap on it and proceed to rub the skin surface from the foam.
How can you wipe the mounting foam in that situation, if such a technique did not help much? Instead of a brush, you can use pumice and soft sandpaper. In order to get rid of the hardened substance as quickly as possible, you must hold your hands in hot water for ten minutes before the cleaning procedure. This must be done to steam the skin properly.
If after the mechanical cleaning method there are still traces of foam on the hands, then you can try to get rid of them through nails. The procedure for removing the mounting foam, which has already managed to dry, is quite laborious and complicated. It may take about an hour.
With any method, from all of the above, it should be borne in mind that the skin should be well treated with a rich cream. You can also make an oil bath.
How to get rid of traces of foam from things?
How to wipe the mounting foam from clothes? As soon as traces of foam on the clothes were noticed, immediately you need to take a solvent with a rag and begin to wipe off this substance. If you do not have time to get rid of the traces of foam in time, then the clothes can not be saved, since the hardened material will not lend itself to washing or cleaning. However, solvent can also spoil clothing. To do this, you just need to check the reaction by applying the product with a cotton swab on the back of the thing.
You can also purchase a special product for cleaning clothes. However, first you need to familiarize yourself with its composition and instructions for use. Otherwise, the probability of damage to things will only increase. The negative point characteristic of specialized cleaners is the presence of a large amount of acetone in the composition. This must be taken into account if there is a thing that is not resistant to the effects of this type of solvent.
Sometimes, to get rid of traces of polyurethane foam from clothes, it is enough just to use vegetable oil. The same can be said if the question arose of how to wipe the mounting foam from a plastic window or linoleum. For this, part of the material is cut off from the clothes in such a way that only a minimal amount of foam remains on things. Then it is required to apply oil to the contaminated surface and hold this thing for half an hour. After this, the mounting foam is removed quickly and easily.
Conclusion
In this review, we have provided several examples that describe how to remove polyurethane foam from leather or clothing. We hope that one of these methods will help you cope with this task.