The metal tile combines several advantages at once. This is a budget, durable and easy to use material. It is not surprising that many opt for such a roof. Having figured out how to lay a metal tile on the roof, you can even cope on your own by covering the roof yourself. For
This should know some important points.
Analysis and calculations
First of all, it is worthwhile to understand that such material is not suitable for all designs. A do-it-yourself roof made of metal is only possible for structures with a pitched roof and a slope of 14 degrees. A complex design is extremely undesirable, as you will have to do a lot of trimmings and lose some of the materials in the waste. In order to determine the required amount of roofing before buying, you need to measure the parameters of the slopes. The metal tile should overlap the length of the ramp by about four centimeters, this arrangement will provide additional ventilation. It is also worth measuring the lateral elements of the roof - the roof should be symmetrical, otherwise during installation you will have to face a lot of inconvenience.
Necessary equipment
It is not necessary to be a professional in construction so that a roof made of metal tiles with your own hands seems to be a doable task. But some special tools will still be required. For example, you need a hacksaw
wood and low-sided
drill, screwdriver, special
scissors for metal and a hacksaw for metal, as well as tape measure and pencil. In addition, before you
make a roof of metal, you will have to acquire shoes suitable for work. Lightweight rubber-soled boots work best. Heavy shoes with hard soles can damage
thin sheets of metal tiles and even pierce them through while you move around the roof. To avoid this, think about the right shoes in advance.
What kind of crate and rafter system are needed?
The main requirement for the rafter system is strength. It must withstand wind and accumulating snow. In addition, so that the roof, with its own hands made of metal, lasts longer, its lathing must be carefully waterproofed. The waterproofing film prevents condensation in the roof and protects against leaks. You should also take care of vapor barrier and insulation, especially if you plan to use the room under the roof as a living. Only
then you can start working on the roof.
Installation of roofing
Sheets should be laid from the end if the roof is made of a metal tile with a do-it-yourself construction, and from the top point if the roof is hipped. Each element is fixed with screws. A single overlap will be enough to obtain an airtight coating. Try to arrange the sheets as evenly as possible and work carefully so as not to damage them. Special attention will have to be paid to valleys, skates and curtain rods. For longer roof service life, also acquire snow retainers, which are strengthened with self-tapping screws on top of the finished roofing.