Your washing machine has been serving you for several years, but is there a periodic knock during its operation? Or after washing do you observe soapy water on the floor? There was probably a breakdown in the washing machine. Why did it arise and what to do in this case? Next, we will consider typical breakdowns of washing machines of different brands, their causes and remedies.
The machine does not turn on
The power button does not work - this is perhaps the most common breakdown of a washing machine. Why it happens? The washing machine may not turn on for two reasons:
1. It is not connected to the mains. In this case, it is necessary to check the serviceability of the outlet or cord from the machine itself.
2. Turning on is blocked by a malfunction inside the device itself.
If everything is clear with the first reason, then what to do in the second case? Here you can not do without the help of a master. Only after diagnosis can he determine the cause of such a breakdown. Most often, the washing machine does not turn on in cases where:
- the Start button is broken or oxidized;
- the device blocking the hatch has become unusable;
- the electronic module is broken;
- the wires of the electrical circuit broke.
The machine erases longer than usual
This is a fairly common failure of the Indesit washing machine. Despite the fact that the devices of this company are made in Italy, they are also subject to various malfunctions. The cause of this failure may be hidden in the malfunction of the electronics, water temperature sensor, device controls, etc. In addition, such a malfunction occurs due to improper position of the drain hose.
If you notice that the drum spins slower than usual, then most likely you just overloaded your machine.
In most cases, you can solve a problem such as a long wash yourself. First you need to check that the drain hose is located 60 cm from the floor, and make sure that you do not overload your machine. If this is not the cause of the breakdown, you should contact the master.
The machine is noisy when washing
This is another frequent breakdown of the Indesit washing machine. However, it also occurs in devices of other manufacturers.
Some machines, including Indesit, always knock when washing. This is due to the design features of the units. However, sometimes such a problem occurs unexpectedly. What is the cause of the problem? Most likely, a foreign object fell into the machine. After completing the wash, check your “assistant” for extra items. If you did not find anything, then there can be two reasons for the breakdown:
- bearings are out of order;
- the machine was not installed correctly.
Only an experienced craftsman can solve these problems.
All indicators blink
This is a fairly common breakdown of the Samsung washing machine. Its elimination can be facilitated by the fact that almost all devices of this company are equipped with a display on which error codes are displayed. So, for example, if the designation “ZE1” appears on the screen, this means that the engine is overloaded, and the combination “9E2” indicates that the control module is broken.
If all the indicators flash on the typewriter and the error code is shown on the display, then you can determine the cause of the breakdown yourself. But what to do if there are no numbers on the screen? This means that damage should be sought in the electronic board. Unfortunately, only the master can install and fix such a malfunction.
The machine does not drain water
If such a problem occurs, consider how long you have cleaned the drain pump filter. If not, then the reason for the breakdown lies in this. Also, the washing machine may not drain the water due to malfunctions of the pump itself. However, it is worth saying that its breakdowns occur in most cases precisely because of a clogged filter.
This is a fairly common failure of the LG washing machine . You can find out what exactly the malfunction consists of using the special code “OE” that appears on the display.
Under the washing machine water
If during washing you find water under your washing machine, do not rush to sound the alarm. Perhaps the reason is underwear. If you wash the curtains, the formation of a pool of water under the machine is a common occurrence. The fact is that such a material does not absorb moisture well. As a result, an excess of foam forms, which flows out through small openings in the machine.
If you wash everyday things, then the cause of this problem can be very serious. So, why else can a puddle of water form under the machine?
- Hose leaking. You can eliminate such a malfunction on your own and at minimal cost.
- Dispenser problems. To eliminate such a breakdown, it is necessary to remove the sliding compartment into which the powder is poured and thoroughly clean it.
- Leaking manhole cuff. If you notice that water and foam are leaking from the door, then the problem lies in the cuff. Damage can be fixed by sticking it on your own, or order a new part.
- Tank leak. This problem often occurs in people who often wash shoes, belts, as well as clothes with iron or other solid jewelry in the machine. It is impossible to repair a tank leak on its own. In this case, it will need to be replaced.
Water does not heat up
Every user encounters such a breakdown from time to time. In order to eliminate it, it is necessary to find out the cause of the malfunction.
Place your hand against the hatch door. If after 10-15 minutes you feel warm, this means that the heating element is working properly. If the door does not heat up, then the cause of the breakdown should be sought in the heater. In this case, the heating element will have to be replaced.
In addition, the cause of such a breakdown may be hidden in the pressure switch. In this case, it must be removed from the machine and purged.
Another common reason that the device does not heat water is the open circuit of the heater.
Regardless of where and when the breakdown occurred, it should be repaired immediately. So you extend the life of your washing machine and keep your family healthy.