Today, when there is no hope for central heating, more and more modern consumers prefer to install a system of underfloor heating. They are presented to the attention of buyers in a wide range, manufacturers tirelessly offer users different models that differ in unique characteristics. As one of the options you can consider the products of the manufacturer Energy, the underfloor heating of this company is offered in several models, which will be discussed below.
About the manufacturer and products
Energy - underfloor heating, an instruction the regulator of which is presented in the delivery set. The specificity of the described products lies in the fact that domestic materials are equipped with heating elements of foreign production. Thus, the cable in the models is made by the English company Lytellton Limited, which attracts buyers. The mats are based on a polymer heat-resistant material, which is characterized by high mechanical strength and low thermal conductivity. Today, the company offers several systems that differ in their area of use.
If the room has basic heating, then you can solve the problem of insufficient intensity by using thin mats or single-core cables that are mounted on a tape. There are also powerful heating cables that are installed in rooms without additional heating appliances. Models with a two-core cable of an impressive cross-section become the optimal solution. We can talk about mats or sets of heating elements. Among other things, you can choose floor heating systems on the street, for example, on open areas and terraces.
Energy Mat System Reviews
If you are interested in Energy products, you can purchase underfloor heating from this manufacturer in the Energy Mat version, which is used as an additional heating system. According to customers, these are mats that are equipped with heating twin-core cables. This subfloor is a thin substrate on which elements with a diameter ranging from 2.8 to 3.5 mm are installed. Users emphasize the main advantages of use, which are expressed in ease of installation and an extensive selection of models. Quite often, Energy Mat becomes part of the floor, on which ceramic tiles are subsequently laid.
Reviews on the Energy Light floor heating system
Often, modern consumers are interested in Energy products. The underfloor heating of this supplier is also offered for sale in the Energy Light version, which is a single-core cable used for a slight increase in temperature. Structurally, these models do not differ from the variety Mat, in this case, heating elements are also installed on the polymer substrate. The core diameter is 2.8 mm, while the specific power is 100 W / m².
As buyers emphasize, the cables are a multilayer structure, and thermocouples are protected by a polymer composition. According to customers, you can understand that the design is reliably protected from mechanical damage by a casing, which is made of fluoroplastic. Users choose this model also for the reason that it has an affordable cost. But you can install these heating mats in rooms of any purpose, it can be living rooms, toilets, bathrooms or kitchens.
Installation Instructions
Energy - floor heating, which is quite easy to install. However, before carrying out these manipulations, you must familiarize yourself with the instructions. First you need to identify and prepare a place for the temperature controller and temperature sensor. To do this, select the space on the wall. The temperature regulator should be located at a height of 1.5 m from the floor. It must be installed within the installation area of the mat. This approach will simplify the output and placement of the tube with a temperature sensor. An electrical box is installed at the selected location, to which 220 V power is supplied.
The nuances of the work
In order to make the connection as convenient as possible, you need to remove the ends of the wires 10 cm from the box. Energy is a warm floor, the installation of which can be done by any home master. At the next stage, the technology provides for making a stroba, the width and depth of which should be 2 cm. A corrugated tube with a temperature sensor will be located in it. The strobe must be laid from the thermostat to the center of the heating mat. The bending of the tube is permissible only in the place where the element passes from the floor to the wall. If work is carried out in a humid room, then the thermostat should be located in the next room.
Specialist recommendations
At the next stage, it is necessary to prepare the floor surface to lay the heating mat. It should be located on a dense and even surface with sufficient bearing capacity. If the base deforms, this can lead to cracks in the layer of tile adhesive. When a heat-insulating layer is used, a concrete screed of 3 cm thickness should be laid on it. Only after this is the heating mat laid.
Energy - a warm floor, the installation instructions of which you must study, is a system that is mounted using a certain technology. At the next stage, it provides for the implementation of recesses on the floor surface for laying cable connectors. The surface of the floor is cleaned in the laying area, there should be removed debris and sharp objects. When working with a temperature sensor, mechanical action on the sensor capsule should be excluded. This can cause damage to the thermally sensitive element, which will require replacement.
The temperature sensor should be located inside the corrugated tube, while the sensor itself will be in the floor, and its connecting cable will go out from the other end of the tube, which will allow you to connect the thermostat. Energy - a warm floor, reviews about which quite often are only positive, must be sealed at the end of the tube with the sensor. Otherwise, water or adhesive may get inside, which will require replacing the temperature sensor. The tube is placed in the prepared gate, and after it it is necessary to bring to the location of the thermostat. In order to be able to replace the sensor, the end of the tube must be brought out 2 cm inside the electrical box. It is important to ensure that the bending radius is not less than 5 cm.
For reference
The stroba is filled with adhesive solution, and the location of the sensor is noted. The laying area should be primed using a deep penetration composition. If you are dealing with a highly absorbent surface, then it must be covered with a primer in 2 layers. Before laying the heating mat, allow the surface to dry.
Conclusion
Energy - floor heating, the manufacturer of which took care of quality. However, you must comply with all installation rules. Thus, the heating mat is laid on the heated area, and then work is carried out to fill the surface. In this case, the master should wear shoes with soft soles.