Saw acts as a necessary tool for each owner of a private house or summer resident. It is possible to prepare firewood in a stove or barbecue with the help of a conventional mechanical tool, but you can make a gazebo, build a veranda or build a house only with a chainsaw. Her choice should be taken very seriously, because this tool is expensive. It is important to determine what the loads on this equipment will be, as this helps to understand which class of device is best to purchase.
For example, amateur-level units are suitable for small garden work. This class is the most low-power. He presented models that are designed for periodic use for 45 minutes a day. Typically, the power of such a chainsaw does not exceed 2 kW. However, if this is not enough for you, then you can choose a semi-professional model that has sufficient power and allows you to work on a construction site and when felling. The only drawback of such devices is that they are designed for intermittent use. If you saw with a semi-professional chainsaw every day for 10 hours, then it will not be able to last a long time.
For professionals, the market presents models of chainsaws of the corresponding class. Their power can reach 6 kW. With their help, you can work every day, exerting high loads on the tool. If you still cannot decide, we suggest considering the Partner P350S chainsaw, which will be discussed below.
Feature Overview
The aforementioned chainsaw belongs to the household class. It is an equipment for small household work. With this unit you can cut trees of small diameter, as well as harvest firewood for the fireplace. The design is equipped with a well-launched engine, the power of which is 1.96 horsepower. The chain is lubricated automatically. The engine displacement is 38 cm 3 .
Performance Reviews
The Partner P350S chainsaw, according to consumers, has outstanding benefits. Among them are the following:
- security;
- efficient sawing;
- long work.
As for safety, it is provided with the ability to use the brake, which is activated when you press the front stop. This will immediately stop the saw chain. Consumers also emphasize that this equipment provides efficient sawing. The equipment is equipped with a professional chain and tire, which provide productive work.
Customers also like the possibility of continuous operation, it is provided by the presence of a convenient handle that protects the operator from vibration. This indicates that the master will be able to work for a long time without fatigue. The Partner P350S chainsaw, according to consumers, has many advantages, among which it is necessary to highlight the low weight, as well as the presence of an automatic air damper. In addition, all controls are located on the handle.
Specifications
Before choosing this or that equipment, it is necessary to pay attention to its technical characteristics. The chainsaw described in the article is no exception. For example, the length of its tire is 41 cm. The volume of the oil tank is 0.15 liters. The device weighs only 4.7 kg. The design of 56 links.
The width of the groove is 1.3 mm. The manufacturer supplemented the device with a spark plug of the CMR7H brand. Consumers quite often pay attention also to the chain pitch, it is 3/8 inch. When working, the Partner P350S chainsaw produces a noise level of 105 dB. The length of the tire in inches is 16. The capacity of the fuel tank is 0.3 liters. Power is 1.48 kW.
Reviews about the features of operation
Before starting to work with the described chainsaw, consumers are advised to read the safety rules. After reviewing them, you can find out that the tool is designed exclusively for sawing wood. Equipment during operation generates an electromagnetic field. Under certain circumstances, it may interfere with the operation of medical implants. In order to reduce the risk of serious harm to health, people using such implants should consult their doctor.
The Partner P350S chainsaw, reviews of which should help you make the right choice, can be a source of increased danger. Therefore, consumers are advised to hold it with both hands. Otherwise, you may be seriously injured. If a person is overworked, then he should not start work with a chainsaw. The operator must wear safety shoes and special clothing that should be tight-fitting.
When handling fuel, care must be taken. In order to exclude fire, it is necessary to remove the tool 3 m from the place of fueling. The Partner P350S chainsaw chain must be kept at a distance while the engine is running. Before you start it, you must make sure that the chain does not come into contact with a person or objects. When carrying the chainsaw, you must turn off the engine. The chain and guide bar should face back. Do not use an improperly adjusted or damaged chainsaw. It is important that the chain stops when the operator releases the trigger.
User's manual
Before starting work, it is important to read the instructions. The manufacturer emphasizes that it is forbidden to operate the equipment near flammable liquids. Do not turn on the device indoors, as this can cause carbon monoxide poisoning. Do not refuel equipment while the engine is running. It is important to use a suitable tool.
A chainsaw cannot be operated for the purposes for which it is not intended. This applies, for example, to work with stone or plastic. Before the first start, you should be instructed in using the tool.
Additional specialist advice
The Partner P350S 16 chainsaw must be operated considering that oil must flow to the chain and tire. The tire must be of original design. It is important to make sure that the chain brake lever is in the off position when installing the guide rail. Then unscrew the lock nut and remove the cover. In this case, it is necessary to dispose of the plastic washers, which are used only during the initial transportation.
Using a screwdriver, turn the screw counterclockwise so that the shank is in the extreme position. The end of the guide rail must be mounted on the bolt. The manufacturer emphasizes that it is especially important to adjust the chain tension. This will improve the performance of the device and extend the life of individual components.
When working with the chain or adjusting the tension, wear strong gloves. The Partner P350S chainsaw, the operating instructions of which are described in the article, is equipped with a chain brake. It is necessary to reduce the risk of injury when the saw bounces. The brake will work when you press the lever, as when the instrument bounces. It is necessary to reduce the risk of injury, but it does not provide adequate protection if you handle the saw carelessly. The chain brake should always be checked before turning on the device. This must also be done periodically during the work.
The cost of some parts
Regardless of the quality of the Partner P350S chainsaw, parts for work may be needed. For example, you can buy a drive crown for 74 rubles. But the tire nut will cost you 17 rubles. A muffler for a chainsaw is more expensive - 474 rubles. The carburetor will cost the consumer 870 rubles. Clutch clutch chainsaw Partner P350S costs 174 rubles. The tensioner plate will cost 63 rubles. You can also buy a chainsaw piston in the respective stores, it costs 332 rubles. Piston for chainsaws will cost 1503 rubles.
For reference
Before purchasing this or that model of a chainsaw, you need to familiarize yourself with the technical specifications. This knowledge allows many consumers to understand whether it is worth acquiring this tool. Some even decide that you can do with a mechanical saw. Perhaps you are one of them.
Conclusion
These recommendations must be taken into account, because a chainsaw is a rather expensive equipment, and the purchase of a professional model can seriously hit the wallet, and the purchase can no longer be returned. Yes, and to purchase another model will be unprofitable.