To ensure a comfortable microclimate, the market offers a lot of decent tools. On the one hand, these are productive boiler plants with boiler functions, and on the other hand, portable devices for local heating. Both solutions have their pros and cons, as well as limitations in use. The best option for use in small apartments, as well as for servicing private houses, can be a convector with an electronic thermostat, operating from a 220 V household network. It has a high heating speed, small size and environmental safety. Given the availability of an effective means of monitoring operating modes in the form of a temperature regulator, one can count on minimizing energy consumption. It remains only to choose a suitable model, after evaluating its operational capabilities and reading reviews.
Convector Characteristics
The performance and heat transfer volumes will depend on the power potential of the equipment, which is measured in Watts (W). This indicator can be calculated based on the area of the target premises. For example, a 500 W convector with electronic thermostat is an entry-level option and is suitable for small rooms up to 10 m 2 . The average power of the devices is 1000-1200 watts. Accordingly, a device of this level will be able to serve premises with an area of 15-20 m 2 .
From the point of view of configuration of placement and installation, the convector will also have values and dimensions. As already mentioned, these are compact devices that do not take up much space. In fact, this is a panel that can be installed either floor-mounted or wall-mounted. The standard model can be 40-120 cm in length and 20-100 cm in height. The thickness is also small - up to 10 cm. It is also worth emphasizing the high accuracy of temperature regulation. Even in the budget segment, you can find a convector with an electronic thermostat, which allows you to adjust the operating mode in increments of a digital scale of up to 0.1 ° C.
CNS 150S by Stiebel Eltron
The model is quite old, taking into account the dynamics of updating the segment of heaters in the market, but, oddly enough, continues to be a success. This is largely due to the fact that the nominally declared performance indicators are fully justified in practice. This applies to power at 1500 watts, and a wide range of protective systems. The owners indicate that in normal operation, the device is capable of serving 20-25 m 2 . Users note the focus on operation in rooms without central heating. At an outdoor temperature of -10 ° C, this convector with an electronic thermostat can heat a country house of 30 m 2 if it is set up correctly. The design is protected against frost and spray, so for use in harsh conditions, this is the best option. Another thing is that positive impressions are clouded by a high price tag. Yet 5 thousand rubles. for devices of this type - quite a lot.
Model Ballu BEP / E-1000
One of the leaders in the niche of household climate equipment. The BEP / E-1000 model has a power of 1000 watts, is easily programmable through an electronic controller, and compares favorably with its competitors in the stylish design of the glass ceramic panel. Users themselves point to the external similarity of the heater with plasma TVs. True, the presence of wheels destroys this analogy. As for the direct working qualities, this Ballu convector with an electronic thermostat is best manifested in rooms up to 15 m 2 . According to the owners, the correct use of control tools allows for quick heating of the air with the drying effect. Aluminum heating elements provide high efficiency during silent operation, so the device can be placed near or even in the bedroom itself.
Model Nobo C4F20
A very solid solution for large private houses and cottages. The power of the device is 2000 watts, and this is not the limit. In the sense that, if desired, it will be possible to organize group heat supply with several convectors of this Nobo series with one control module. The main advantage of the heater, which users themselves note, is precisely the precise and ergonomic regulation system. The thermostat allows you to adjust the temperature with a wide step of 0.4 ° C, however, even after reaching the designated mode, even the slightest differences do not occur. Moreover, the owners indicate a high heating rate. A convector with an electronic thermostat C4F20 fills rooms with an area of 18-20 m2 in just 3-4 minutes. And all this with quiet operation, the possibility of updating the thermostat and the presence of moisture protection.
Electrolux ECH / AG-1500EF
Under this brand, usually come out budget, but functional models of different household appliances. In this case, to these pluses you can add considerable performance - at 1500 watts. The features of the device include the absence of the effect of heating the case, a high speed of reaching the desired temperature mode (on average 1-1.5 minutes) and an efficiency of about 90%. The practice of use generally confirms these qualities. As for the weak points, like all Electrolux convectors, this model does not differ in the variety of design designs and is delivered to the market in the minimum configuration. A set of mounting hardware, for example, will have to be purchased separately.
Model Thermor Evidence 1500
The power potential of the device is standard - 1500 W, the list of protective qualities is also on a general level, and it differs from its analogues in the ability to perform two types of installation - floor and wall. Users praise the model for its noiselessness, original design and stable heat dissipation. In addition, the cost of a convector with an electronic Thermor thermostat of 4 thousand is fully consistent with its capabilities. However, before buying, it is worth considering negative comments. Among them there is a criticism of the technical reliability of the device. Many say that after a few months it may be necessary to replace individual elements, but this probability will more likely depend on the nature of the heater.
What to consider when choosing a model?
In addition to the main performance indicators such as power and temperature range, it will be useful to pay attention to the design. This is especially true for the implementation of the heating element. It is best to give preference to devices with X-shaped Energy Monolit heating elements or Double-U-Force systems. They are not only highly energy efficient, but also durable. These components, in particular, are equipped with modern Electrolux convectors with a power of 1500-2000 watts. This allows you to ensure their economy without loss in performance. The outer cover of the panel also matters. In order not to have to tint the paint or enamel on the surfaces of the device after some time, it is advisable to immediately purchase models with heat-resistant polymer treatment.
Conclusion
Small-sized heaters have one common drawback, due to the limitations of the heat transfer zone. Therefore, an electric convector with an electronic thermostat should be calculated in advance from the point of view of the optimal location. As already noted, some manufacturers also allow the possibility of combining several devices under one control system. That is, in each room there can be several convectors, for each of which it will be possible to set its own work program for setting the temperature using a thermostat.