Designing interiors, modern designers think through every little thing. However, traditional heating appliances, which look bulky and painted with white paint, can not decorate the room. Manufacturers offer for sale decorative pads, as well as perforated panels, but their minus is that the heat transfer of the devices is reduced.
Not so long ago, a functional novelty appeared on the heating equipment market, which has an attractive design. We are talking about vertical heating radiators.
Description of Cast Iron Vertical Batteries
Vertical heating batteries are also called high, and there is no way to install them in the traditional way, because the window opening simply does not fit such a device. Devices differ in the material of manufacture. Among others on sale, you can find cast-iron radiators, which have many advantages, namely:
- high heat transfer coefficient;
- lack of restrictions on the acidity of the coolant;
- ability to undergo high pressure in the system;
- high resistance to corrosion;
- average cost.
However, these devices have a lot of weight and inertia in terms of heat. For their installation, sufficiently strong fastenings and appropriate strapping are required. There is no way to install thermostats on this equipment.
Description of aluminum vertical radiators
If you are interested in vertical wall mounted heating batteries, then you can pay attention to their aluminum version, which is a low-temperature device. This indicates that the level of heat transfer to the room is provided due to the impressive area of the device itself. At the same time, it is possible to maintain a stable temperature within +22 ° C, but the temperature of the coolant should vary from 60 to 70 ° C.
The advantages are low inertia, low weight, the use of steel nipples when connecting sections. The last factor makes replacing damaged parts easy enough.
Disadvantages of aluminum appliances
However, such devices have disadvantages, they are in high cost, limiting the pH of the coolant, which must be equal to or greater than 7, as well as the need to use an automatic valve for discharge. It is impossible not to highlight another feature, which is the limitation of the working pressure in the system. This parameter should not exceed 10 atmospheres.
Description of steel vertical batteries
Vertical radiators are also steel. Models can be tubular or wall, and steel at the base has a thickness reaching a mark of 1.5 mm. Parts are welded together using a laser or standard method, and the recesses on the surface of the products are connecting channels, which are known as collectors.
The external surface of these structures is coated with enamel and heat-resistant varnishes. If you want to get a higher heat transfer, then you should prefer panel radiators, because they are complemented by an automatic thermostat and are able to undergo pressure up to 10 atmospheres. Steel vertical radiators have another significant minus, which is expressed in susceptibility to water hammer. Therefore, you should not allow the probability of a lack of water in the system for more than 2 weeks. Such batteries are used most often for central heating systems.
Reviews of tubular vertical radiators
These batteries are the most advanced today, which is why they are so good for the implementation of design ideas. According to customers, similar devices of any shape can be found on sale, however, they will have less impressive heat dissipation.
Consumers emphasize that such heating appliances have leak-prone areas that are located in the weld areas. You can use the device for individual heating systems. And owners of private houses note that they are trying to choose appliances whose interior is coated with polymer paint, as this reduces the risk of corrosion.
Description of Bimetal Vertical Batteries
You can choose vertical bimetal heating batteries , based on aluminum and steel, which allows you to take advantage of the appliances with the greatest efficiency. Steel goes to the manufacture of the core, which will be in contact with the coolant.
But aluminum is used to form compounds and the outer shell. Such appliances can become part of a central heating system. And if you look at the technical data sheet, you can make sure that bimetallic radiators are able to withstand pressures up to 40 atmospheres. Similar vertical radiators have several additional advantages, such as:
- high resistance to corrosion;
- inertness to the level of acidity of water in the system;
- light weight.
Reviews of vertical radiators in terms of connection type
When choosing vertical batteries, you should pay attention to their classification. Devices are divided into: smooth, ribbed, sectional, tubular and linear. However, it is important to consider the type of connection, which can be lower, lateral and diagonal. According to customers, the first variety of radiators is the most expensive, but often found. With the lower type of connection, installing a vertical radiator will be quite simple, but the pipes are installed inside the wall, they can also be laid in a decorative box.
Home masters note that the lateral connection can not be called effective, because the coolant in this case can remain inside the radiator even in the warm period, which negatively affects the quality of the device. Choosing vertical heating radiators, photos of which are presented in the article, you can pay attention also to those that suggest a diagonal connection. According to consumers, it is the most effective, with the entrance will be located above, and the output - from the bottom. The dimensions of the appliances do not have limited standards, and the height can reach 6 m with a width of up to 3 m. If you want to increase the efficiency of the heating system, then, according to customers, it is best to choose two- or three-layer structures.
Positive feedback on vertical heaters
Vertical high heating batteries are gaining popularity quite rapidly, this is due to many factors. Among them, consumers distinguish:
- a huge selection of design and color solutions;
- relative compactness;
- wide range of mounts;
- easy installation;
- large heat transfer area.
Such devices can be purchased not only in the store, but also from private manufacturers who manufacture devices to order in the form of mirror panels, tubular eights and other intricate elements. Buyers note that this fact is the most significant criterion when choosing high radiators.
If you want to decorate the premises of your apartment, which has a rather limited area, but want to resort to modern design solutions, then vertical heating devices will be your best choice, because they will not take up space at the bottom of the room, and for panoramic glazing they will become the only right exit . If desired, vertical heating batteries in Tver can be purchased for 8700 rubles. In this case, we are talking about a tubular radiator. But such an affordable cost is not the only advantage. Consumers also consider the possibility of choosing different wall materials for installing batteries to be a plus. You can mount the radiator on brick, cement, concrete, etc. Installation will be quite easy, and additional skills, tools and knowledge will not be required, which will save money.
Cost
Before starting repairs, you can purchase vertical radiators in Russia. The price for them has a fairly impressive take-off. For example, a device from the manufacturer Vertical will have to pay 11,300 rubles, while a Tinos V radiator will cost 44,300 rubles. Indi products are similar in price to the aforementioned model. For the batteries in the latter case, you will have to pay 39,900 rubles.
Chinese vertical heating batteries, as practice shows, are somewhat cheaper. For one of these models, which is based on duralumin, you will have to pay 16,000 rubles. The connection will be lateral. But for the Paros V model from the manufacturer PURMO, suppliers are requesting 22,500 rubles.
Negative reviews
If you choose vertical radiators, 150 mm is a parameter that can mean the center distance. However, this characteristic does not affect the operational features too much. It is much more important to know that when working in such devices, most of the air goes to the ceiling, so consumers recommend installing them closer to the floor, which can not always be called a positive advantage.
Customers like design ideas embodied in vertical heating appliances, but they negatively affect the cost of the product itself and components. The price is much higher compared to similar skirting boards or horizontal devices. But for models from the serial collection or custom options, the cost will be even higher. To purchase designer radiators, you will have to pay out an amount that is 8 times the price of a regular horizontal battery. Buyers also do not like the diagonal connection with external pipes, which does not look so attractive, so experts recommend hiding pipes inside the wall, but this will cause additional costs.
Conclusion
If you decide to choose vertical radiators for arranging the heating system of your house or apartment, then you need to take into account their main feature, which is an impressive weight compared to other types. That is why high radiators are installed on the load-bearing wall, and are located near the riser. You should not choose as a wall for mounting partitions, which are made of gypsum board, chipboard and MDF, because they simply can not withstand the weight of the structure.