What is a non-woven fabric, everyone knows who in his life has dealt with sewing clothes. Tailors use this material to seal fabric. Non-woven fabric is a non-woven material that contains textile and cellulose fibers bonded using polymer binders. It resembles fiberglass, but much thinner.
Non-woven wallpaper often does not consist entirely of this material, it is only at the base, on top of which a vinyl coating is sprayed. Such a base makes them lighter, more durable and stronger than paper-based vinyl wallpapers. The structure of this material does not allow the wallpaper to stretch after gluing, as well as to dry out and deform. If we talk about how to glue non-woven wallpaper, it is worth noting that this is done easily. Usually they are taken for painting: it is good to apply acrylic or dispersion paints on them, repaint and wash them.
If you are interested in how to glue non-woven wallpaper, then you should know about a few points. They can be glued to any surface: porous concrete, paper, panels made of chipboard and wood, drywall, any type of plaster. It is important to remember that the non-woven fabric is very thin, so the base sometimes shines through the wallpaper. If you are not going to apply paint on top of them, then you should make sure that the base under them is a uniform color that will be in harmony with their shade. Speaking about how to glue non-woven wallpaper, it is worth saying that before starting work it is necessary to remove the old coating from the walls, smooth and ground them. This type of coating is not too demanding on the quality of the surface, therefore, it allows masking small irregularities and cracks, and the more pronounced the relief of the wallpaper, the more they will cope with large errors.
If we talk about how to glue non-woven wallpaper meter, it is worth noting that before starting work, you need to pay attention to the glue. Here only a special composition is needed. It is much thicker than the usual glue for wallpaper, does not saturate the sheets completely, and after hardening it does not turn yellow, but rather becomes transparent. This moment is very important when working with such wallpapers, as they are thin and translucent. If the glue comes out at the seams, then it should be carefully removed, otherwise it will subsequently become an obstacle when painting.
Understanding how to glue non-woven wallpaper, it should be noted that special technology is used here. Glue needs to be lubricated only on the surface on which the wallpaper will be glued. This allows you to reduce its consumption by half. This material is strong enough, so the work can be done without preliminary cutting, unwinding the roll directly in the process of gluing. If we talk about how to glue a corner with non-woven wallpaper, then there is also nothing complicated. The edge of one sheet should go a couple of centimeters on an adjacent wall, and then butt to it you will need to glue the second.
When the work is completed, you can start painting. Using various colors, you can not only achieve a harmonious result, but also extend the life of the wallpaper.