Productive and high-tech trimmer Huter GGT-1000S is a gasoline motorized scythe. It was developed by German designers for the effective care of lawns, court territories, parks, lawns and courtyards. The tool is suitable for working in the country and in the city, mows vegetation even in the most inaccessible places (between trees or poles, as well as near walls and fences). For harvesting hard and dry plants, there is a special blade made of metal.
Description
The Huter GGT-100S is equipped with a two-stroke gasoline engine with one cylinder. The power unit has atmospheric cooling, an electronic type of ignition. Manual start is located in the upper part of the housing. The power of the unit is 1.3 horsepower. There is a vibration leveling system that increases the comfort of using the tool. The center bar has a collapsible design, which makes it easy to transport it in the trunk of a car, as well as save space during storage.
The control is located on a curved ergonomic handle, the configuration of which is focused on strong hold during operation. On one half of the handle is the ignition activation, gas adjustment key. The cover of the holder is made of non-slip polymeric materials, preventing the possibility of loss of braids during operation.
The Huter GGT-1000S motorized mower is equipped with an angle reducer that stabilizes the cutting part of the device. The working element is covered with a protective casing, it is a reel with a cutting line or a blade of a rigid type rotary knife. The first option is optimal for mowing young grass, and a steel knife effectively fights with coarse and old vegetation.
Equipment
The Huter GGT-1000S gas trimmer also comes with a special shoulder strap. Its use makes it possible to move the bulk of the instrument to the operator’s body, removing the load from the hands. This significantly increases the working life and facilitates operation, allowing you to mow grass for a long time.
The manufacturer of the unit focuses on product quality. All stages of the process pass control. As a result, the trimmer in question meets all international standards of safety and quality. Information is confirmed not only by users, but also by relevant documentation.
Features
Benzokosa Huter GGT-1000S has a number of features that stand out from the competition:
- Full autonomy, which allows you to operate the unit in almost any place.
- The fuel tank with a capacity of 0.7 liters is translucent, which makes it possible to visually control the amount of fuel.
- A convenient handle allows you to ensure reliable fixation of the trimmer, direct the working part to the right place, and adjust the parameters of the unit.
- The collapsible bar provides compactness of the braid during transportation and storage.
- The two-stroke power unit is distinguished by reliability and speed, has a long working life.
- Additional convenience is added to the controls located on the handle.
Technical specifications
Below are the main features of the Huter GGT 1000S gasoline trimmer:
- The engine is an air-cooled gasoline two-stroke engine.
- Ignition - electronic type.
- Volume - 32.6 cc cm.
- Speed - up to 9500 rotations per minute.
- Power - 1 kW.
- There is an anti-vibration system.
- Bevel width - 255 mm.
- Sound load - 96 dB.
The figure shows the main parts of the trimmer:
- Petrol power unit.
- Fuel tank.
- Manual starter.
- A connecting rod with a flexible or rigid shaft inside.
- Handle.
- Governing bodies.
- Tie wire
- Angular type gearbox.
- Cutting tool.
- Safety guard.
Device
The Huter GGT-1000S trimmer is a convenient and reliable tool for mowing grass. Convenience is due to the low mass of the unit, as well as the optimally balanced placement of the main components on the central bar. It is a hollow metal pipe of two parts, fastened by means of couplings with clamps. The surface of the rod part is coated with a special anti-corrosion coating. In the inner part of the element is a shaft that transmits torque from the motor drive to the cutting unit.
An actuator is provided in the upper part of the rod, consisting of a two-stroke piston gasoline engine with electronic start. With a working volume of 32.6 cubic centimeters, it is capable of gaining from 7 to 9.5 thousand revolutions. The fuel used is a mixture of gasoline with an octane rating of AI-92 and oil, designed for two-stroke engines with atmospheric cooling. The outer part of the cylinder has ribs, which allows to increase the area of heat transfer and cooling intensity. The power unit is placed in a plastic casing with holes for air circulation.
Additional items
The fuel mixture is poured into a special tank, which is a tank of translucent plastic, with a capacity of 700 milliliters. Additionally, the engine of the Huter GGT 1000S mower is equipped with a silencer and an air filter. The connection of the motor and the rod is carried out by means of a centrifugal clutch and vibration damping unit.
An angular gearbox is provided in the lower part of the rod, which serves to control the change in the direction of the axis during rotation of the rod shaft. This approach allows the operator to maintain the work plane in a horizontal position. The cutting tool is fixed directly to the gearbox.
Principle of operation
A Huter GGT-1000S spare part such as a semi-automatic reel with fishing line is used when necessary to cut fresh and not coarse grass. The inner part of the coil contains a certain supply of polymer string, supplied as it is grinding or breaking.
To add cutting ends, just lightly hit the bottom of the block on the ground. At the same time, you do not need to stop the tool. A three-blade steel knife is suitable for working with coarse and dry thickets. To protect the operator and surrounding people and animals from particles of weeds, small stones and flying earth will allow a special protective casing.
Exploitation
In the middle of the boom, the Huter GGT 1000S gasoline brushcutter is equipped with a control handle fixed on a special bracket. This element consists of two halves, has an external resemblance to a bicycle wheel. One part is designed for a solid grip, and the second half is equipped with control parts that can be controlled without removing your hand. This unit includes an ignition activation button, as well as trigger amplifiers and gas locks. The lock is in the continuously activated position until the user grabs the handle with his hand.
Near the control handle bracket there is a special hook for attaching a shoulder strap, the use of which allows minimizing the load on the operator’s hands. At idle, the torch remains in a fixed position, activating with an increase in speed. The efficiency of mowing the vegetation with the tool in question is ensured due to the small cross section of the cutting part at high speed.
Huter GGT 1000S: Getting Started Guide
Given the fact that the gas trimmer is used primarily in open space, the number of exhaust emissions per person has no negative consequences. The practicality and functionality of the tool is combined with the simplicity of assembly and preparation for work. For operation, the operator does not need special training, just study the user manual.
Like any cutting tool, the trimmer requires compliance with safety rules. This will avoid injuries and extend the life of the unit. Each delivery set has instructions that detail all the operating points. Particular attention should also be paid to the preparation of a two-stroke mixture for the motor. Use recommended brands of working fluids. Otherwise, the Huter GGT 1000S carburetor and other engine elements are likely to fail. Gasoline and oil must be mixed in a proportion of 25/1 using a special container that is included in the package. This dispenser has a gradation and a convenient neck for transfusion of liquid. It is only necessary to prepare the mixture and refuel the unit far from any sources of fire.
Huter GGT 1000S: reviews
As the reviews of the owners confirm, the motokosa under consideration refers to high-quality and practical products. Among the advantages, users note the following points:
- Excellent equipment.
- High performance.
- Convenience in work.
- The ability to assemble and disassemble the rod.
- The presence of two types of working nozzles and a set of keys.
- Detailed instructions in Russian.
Among the shortcomings, the owners noted a considerable price, a weak manual starter and unreliable fuel pipes. However, in general, the trimmer is characterized positively. It is worth noting that the manufacturer gives a one-year warranty on the tool, subject to the observance of the operating rules.
In conclusion
The HUTER GGT-1000S petrol trimmer, the reviews of which are given above, is intended for mowing young grass and dead wood in the summer cottage and other areas requiring appropriate care. The kit, in addition to the braid itself, includes detailed instructions, a set of keys, a measured capacity, a shoulder strap.
When buying a new modification, pay special attention to engine break-in. The first 3-4 grass mowing operations are not recommended at maximum speeds. A mixture of fuel and oil is first prepared at the rate of 25/1. After break-in, the proportions are 40/1. Observing all the rules of operation and safety, you will get a reliable assistant for many seasons.