Today, less and less can be found at home, where they cook food on old stoves. Increasingly, you can meet gasified facilities. However, their operation has its own characteristics. For example, it is preferable to mount gas meters in an apartment, because they help to save money on utility bills.
Do I need to install the device?
The principle of operation of such devices is quite simple. The gas that passes through the chambers under pressure catches a torque mechanism with numbers. There are several such cavities inside the counter. They are separated by plastic or aluminum plates.
Regarding the question of the appropriateness of such a device, it is desirable to install gas meters in the apartment. The fact is that they have significant advantages. You and consider them further.
Device advantages
So, the device has such advantages:
- Simplicity of design and speed of installation. At the same time, you can produce it yourself or with the help of a licensed specialist.
- Reasonable cost and a wide choice of models. It all depends on the size of your apartment, as well as your needs.
- You will know exactly how much gas you burn. This will make it possible to redistribute consumption.
- If household gas meters are installed in the apartments, then you will pay at lower rates. Otherwise, the cost of blue fuel will be higher. In this case, you will pay for it, even if you do not use it. If for some period you will not use gas with a meter installed, then you will not have to pay for it.
Household gas meters are very important devices that require respect and proper operation. Naturally, you should not try to repair them yourself or break the seal.
Device disadvantages
Now you should consider what problems may arise during the installation process, and what disadvantages the counter has:
- Periodically, the device will need to be checked. Therefore, be sure to monitor the integrity of the seal. Do not try to use various bugs to save money. Specialists can detect this, and you will receive a serious fine.
- There are certain rules for installing a gas meter. That is, it can not be mounted wherever you want.
- You will also need a gas service permit. Therefore, even independent installation of the device is fraught with difficulties.
- Naturally, installing a counter is not free.
If you are not afraid of these shortcomings and the device is suitable for you, then you should consider its varieties and features of the choice. This question is quite important, as it allows you to install exactly the device that will be most effective for you.
Varieties of models
You will learn the rules for installing a gas meter later. Now you should understand what types of devices exist. So, you can find such aggregates:
- Membrane Their advantage is the simplicity of the device and use, low cost, accuracy of calculation of fuel used. However, they should not give in to any, even the slightest overload.
- Rotational . They are small, but can pass a fair amount of gas. In addition, these devices can tolerate overloads. But they are quite expensive, as they are made from special alloys.
- Turbine Such devices are quite effective and can be equipped with special add-ons that can transfer indicators to the service automatically.
- Whirlwind . They have a large measuring range, low sensitivity to gas purity. And they work from the electric network.
Putting a gas meter can be very fast. However, you must first select it correctly. In everyday life, the first type of device is most often used.
How to choose the right device?
So, the installation of gas meters begins with their purchase. There are some selection rules that will help you get exactly what suits you best:
- First of all, deal with the type of device and its bandwidth. Do not buy too powerful a unit if you have a small apartment or central heating.
- Note that the counters are left or right.
- When buying a device, be sure to get a guarantee.
- During the selection, pay attention to whether the release date is indicated on the counter. This is necessary for verification.
- Before installing a gas meter, consult an expert.
In principle, these are all the rules for choosing the presented technique.
What tools and materials are needed for installation?
Installation of gas meters can be done by hand. To do this, collect all the necessary tools. You will need:
- Counter.
- Wrenches of different sizes.
- Adapters with which the meter will be connected to the inlet and outlet pipes.
- Fasteners.
In addition, you will need to purchase insulation material that will eliminate the possibility of gas passing through the joints.
The rules for installing a gas meter provide for the installation of the device only by a person who has the necessary knowledge, experience and license to work with such equipment. Therefore, it is better to do everything right.
Counter Installation Project
Before figuring out the rules for installing a gas meter, consider the very first stage of installation: making a graphic plan. That is, before the device is attached to its place, the representative of the gas service is obliged to prepare a project. Without it, you cannot register a device.
The installation project not only ensures proper installation, but also makes it legal. Any device that is associated with natural gas must be registered with public services.
Installation steps
The meter installation rules provide for certain steps that must be carried out sequentially:
- First, you must submit an application to the Gorgaz service. A specialist can be sent from here. In addition, you have the right to use the services of a private company that has a license to carry out such work. Please note that together with the application you will need to submit a copy of the technical passport of the apartment, as well as your personal documents.
- Inspection of your living space by a service specialist. He will be able to clarify the cost of work and make an installation project.
- Now you can start installing the device. That is, gas workers will do it themselves. However, note that it is better to buy all the components yourself. So the work will cost less.
- After installation, you will be issued an executive act, as well as a receipt confirming that the services have been paid.
- The next step will be the installation of seals on the meter, as well as its registration in the gas service. Only after that you will be able to pay for gas on the installed device.
If you have any problems with the device or if it was accidentally damaged, you must definitely contact the specialists. This will help you not get a fine from regulatory authorities. In addition, you will avoid the huge danger posed by a gas leak.
What rules should be followed?
Now you should consider some of the recommendations that are binding:
- The height at which the installation will be carried out must be at least 1.6 m.
- A distance of 3-5 cm should be maintained between the wall and the apparatus.
- There must be a distance of 80 cm or more from the nearest gas appliance to the meter.
- The room in which the device will be mounted must be well ventilated. That is, natural ventilation must be present in it.
- It is undesirable to mount the unit in niches or enclosed spaces.
- If you are installing the meter on the street, then try to protect it with a special cabinet or canopy.
- Install the device in rooms where it will not be exposed to moisture or heat.
- Do not mount the meter on a support that is separate from the building.
- The horizontal distance from the window and doorways should be about half a meter.
These gas meter installation rules are mandatory. Failure to do so may result in a fine or danger. In any case, you learned how to set the counter. Now you just need to contact the specialists - and you will have the device presented. Good luck