They will help create trees from bead patterns of weaving. Birch, sakura and other trees will turn out to be unusually beautiful, picturesque, if you follow them and the description of the work.
White-barrel beauty - the beginning of creativity
If you want to make a birch, for its manufacture you will need:
- 0.3 mm thick copper wire ; 1 mm;
- beads of dark, light green, turquoise color;
- 3 mm thick aluminum wire;
- stand for wood - a bowl, a pot;
- brushes, PVA glue;
- floristic ribbon;
- Double-sided tape;
- white acrylic or window paint.
They will tell you how to make trees from beads, weaving patterns. First pour the beads of all colors into a suitable container, mix. When stringing, you will take it in a chaotic manner.
We start with the consciousness of the first branch. In one hand you have a coil with a wire 0.3 mm thick, in the other - the first little thing beads. String it on the tip of the wire, pull it a little further, then take the second bead with a hole. So collect 12 beads. Connect the first with the last, twist the wire under them so that you have a “foot” of it 1 cm high.
Step back as much and make a second leaf, which is hollow inside and consists of 12 beads. These 5 leaves will be on one side of the branch. Make 3 more leaves, which will be the top of the branch, then do another 5 loops. They will be on the other side of the branch.
So begin to make trees from beads. Weaving patterns are so simple that you can do without them. As a result, you get a branch consisting of five leaves on the left and right sides, and 3 leaves are apical.
We assemble the parts into a single whole
Using the same technique, create another 49 branches. Now they need to be grouped in five. To do this, leave the end of the wire free, now simply twist these parts of the branches so that each consists of five blanks.
Cut a length of 10 cm from a wire 1 mm thick, attach it to the free part of the branches, fasten with a floral tape. You have 10 large branches, each of which consists of five small ones.
Cover the floral ribbon with white paint. When it dries, make black strokes on top. When it dries, start collecting birch.
To do this, cut a piece of aluminum wire, which has a cross section of 3 mm. Start on top with double-sided tape and attach floral branches to it with floral tape. Thicken to the bottom of the trunk. To do this, first wrap a bandage here, and then tape and tape for floristry.
How to fix birch and other trees
Put a birch in a bowl, fasten. Other bead trees are formed in the same way, the weaving patterns of which are so simple that even novice craftswomen can reproduce them.
You can fix the barrel with plasticine or first cut a piece of thick foam of suitable diameter, put it in a bowl and stick the end of the aluminum wire into it.
To keep the birch or other tree tight, in a separate bowl mix 1 part PVA glue, two - alabaster. Add so much water to make a solution that looks like liquid curd.
To apply it on a tree trunk previously moistened with water , it is necessary without delay, since the alabaster hardens very quickly. Put the remaining solution in the bowl in which the tree is located to fix the birch in this position.
When it dries, cover it with 2-3 layers of white paint. When each of them dries, make a few strokes of black paint to make the birch look like a real one. Paint and paint the surface of the alabaster in a bowl, decorate it with colored pebbles.
Blooming japanese cherry
Create branches for this tree using your own imagination. It may be exactly the same as birch weaving with beads. Trees (sakura) scheme allows you to make very beautiful. The number of beads on one swallow can be the same as the newly created birch. But you need beads not pink, but pink, take a little white. Mix these small beads, string them, too, 12 pieces each to create one leaf.
In the same way as in the first sample, fasten the branches to 5, form the trunk using 2-sided tape and floral tape. Deliberately make bumps on the branches, trunk, so that the tree looks natural after weaving is finished.
Trees (sakura), the creation scheme of which is so simple, must be secured in a container. This will help a mixture of alabaster with water and PVA glue. To make it seem like a tree is growing, spread moss around it. It is enough only to moisten it sometimes, and this natural material will be green for a long time, and the sakura above it will look even more beautiful.
Leaf samples: schemes
Almost the same technology is used to make bead trees. Weaving patterns for the very beginners will be presented below.
As you can see in the photo, first you need to string 5 beads on a thin wire. Then bend it, push it into the penultimate, fourth bead, then - into the third, second, first. After that, string on the same wire, after bending it at an angle of 45 °, another 5 beads, again thread the end of the wire through four of them.
Having collected in this way 3 fragments, each of which has five beads, make two more below. Each of them will already consist of 7 beads with holes. The pattern will facilitate bead weaving. A money tree, the scheme for creating branch leaves for which may be exactly the same, is also very interesting to do.
Symbol of wealth
Leaflets on it may be as in the photo. In the central scheme, the leaf consists of seven rods, each of which is strung with 10 beads. You can make a piece of 22 pieces of wire, as seen in the last diagram.
When the branches are ready, tie a few coins with holes in them. You can cut rings from paper of gold color, glue them in pairs and also fix them on the branches with a rope or thin ribbons.
Bonsai
If you wish, use the simpler method and make not only money, but also other trees from beads. Bonsai weaving patterns are also simple.
Cut pieces of 45 cm long from a wire 0.3-0.4 mm thick. Each of them will soon turn into a branch. Take a little more than 200 g of green beads, as well as yellow, mix them in a container.
Pick up so many beads on the first wire so that it covers it by 15 cm. Take a wooden stick for sushi, wrap a part of the wire coated with beads on it. Insert one through the resulting rings and tighten the other end of the wire to the other side.
In the same way, arrange 2 more branches, twist them together, as shown in the photo. Using a floral ribbon, connect 3-4 branches. Then take 4 such blanks, tape them.
It remains to connect the branches and, observing the asymmetry, fix the bonsai in the container. This is how trees are made from beads, the weaving patterns of which are simple and understandable.