Refrigerators from the Belarusian company Atlant are found in our homes no less than equipment from any other company. But, as in other cases, a burned-out lighting lamp inside the refrigerator is not included in the number of breakdowns subject to warranty repair. It will have to be replaced with one's own hand. In our article, we will describe in detail how to change a light bulb in the Atlant refrigerator, accompanying all the explanations with understandable photos.
How to make sure that it is a light bulb that burned out, and not the refrigerator itself?
If, opening the refrigerator door, you see that the lighting inside did not work, then immediately you begin to think that the unit itself has burned down. But for such refrigerators this is a rare case. They are reliable and durable, and rarely one of them does not serve its full warranty period , and in addition to it - a few more such terms. But still, so that your efforts are not in vain, before changing the light bulb in the Atlant refrigerator, you should look at the lighting fixtures of the working panel.
If they burn, then the problem is really in the light bulb itself. You can also wait and without closing the door, wait for the warning signal that it is open. If one is not slow in waiting, the problem is definitely in a burnt out light bulb.
Then we roll up our sleeves and get down to repair work.
Tools and consumables
Regardless of what shape the protective bulb of the bulb has, it rests on just one screw, the cap of which is made under a curly screwdriver. Of the tools, we will need nothing more than this curly screwdriver. Of the consumables, of course, you should stock up on a 15-watt light bulb with a socket type "minion" (E14). If the platonchik tightly adheres to it, do not take too chubby varieties. Here, only a bulb with an oblong bulb is suitable, as in the photo.
Stage one: preparing the refrigerator
So, before us is the Atlant refrigerator. How to change the bulb inside? First of all, it’s worth starting:
1. By turning off the refrigerator from the network. All manipulations with the equipment turned on can at best end with a short circuit, and at worst with an electric shock.
2. With the harvesting of products from the upper shelf, as they will interfere with subsequent operations.
3. From the removal of the upper shelf after releasing it from the products. This is done easily. It is enough, having pressed the holders, to pull them towards you and pull out the glass shelf itself from its grooves.
Second stage: replacing the light bulb
Now, when nothing else bothers us, the bulb is bought and a screwdriver is at hand, you can proceed with further operations on how to change the bulb in the Atlant refrigerator (photos of all actions are attached right there).
1. Insert a screwdriver into the grooves of the screw (it will not work to look there, but it will be difficult to miss by touch) and we begin to turn it out.
2. When the screw is in our hand, set it aside with the screwdriver to the side. We do not need them yet. To remove the canopy, pushing it a little bit, we move it towards the screw. He will slip out of his grooves in the frame and will be in our hand.
3. Now we proceed to direct manipulations on how to change the light bulb in the Atlant refrigerator, that is, unscrewing a burned out and screwing in its place a new one bought in a store.
4. We do all the actions in the reverse order. We insert the can into its place, screw in the screw holding it.
Third stage: checking and mounting the upper shelf in its place
We turn on the plug of the refrigerator in the network, check. If the lighting fixture is on, our actions on how to change the light bulb in the Atlant refrigerator can be considered successful and completed.
We take the shelf, insert it into the necessary grooves (runners) and push the limiters (shelf fasteners) to the far wall to the stop. We hoist the products taken out the day before into our place, and that’s it. We hope that this bulb will turn out to be much longer than the previous one, but in any case we already have the experience of replacing it, so we will no longer have such problems in the future.
Conclusion
In conclusion, I would like to say that now in specialized stores diode analogues of ordinary incandescent bulbs are sold, which will last much longer than devices with a tungsten filament. Putting this one, you will forget about the problems with the blown bulbs in the refrigerator for a long time.
For those who are wondering how to change the light bulb in the Atlant two-chamber refrigerator, we will answer that regardless of the number of chambers, the lighting in all models of Atlant refrigerators is equipped according to a similar principle and does not differ at all in its characteristics in terms of the diameter of the base , neither in terms of mounting the plafonds, nor in terms of lamp power.
Have a good mood and many years of work for your refrigerator!