The marker, and this is how the device for planting garlic by hand was dubbed, is intended to simplify one of the most important stages in the cultivation of garlic - planting vegetable crops in the garden, in the summer cottage or in the garden near the house.
The product is simple and easy to use. With its help, it is possible to accurately and without much effort mark the holes for embedding planting material in the ground. The design is not intricate, therefore, even a novice gardener can do it independently. At the stage of translating the idea into reality, it is important to think about the geometry (landing pattern) and the form of the future device.
The device for planting garlic, manually created, is an indispensable thing for the gardener, given the availability of the option. Having organized the work correctly, you can reduce the time spent landing, and make the process less time-consuming and energy-intensive.
Advantages
The presence of the described device in the economy is determined by convenience and at the same time aesthetics. Having tried to plant garlic under the marker once, you can no longer refuse to use such a device in the future. With its help, it is easy to quickly mark the beds.
Thanks to a special design, gardeners manage to place planting material to the optimum depth, allowing the garlic to endure winter frosts, spring floods, and summer heat.
Garlic marker: how it works
Manually made garlic planting device is slightly different from semi-mechanical means.
Devices for planting crops are equipped with special containers in which planting material is placed. Using such modernized models of markers, you save time not only on the preparation of holes for sealing garlic, but also on the placement of cloves in each hole.
In this case, the garlic bed is prepared using the opener mounted on the marker, forming a furrow. After which there is a semi-mechanical distribution of cloves around the perimeter of the entire garden. After the garlic is on the soil, with the help of the opener, the planting material is sprinkled on top of the ground.
Important! Remember that seeders working in combination with walk-behind tractors show the highest efficiency when planting garlic seeds on soft, loose soils.
Using the device for planting garlic, manually made, correctly, the farmer saves both on the preparation of the garden and on planting, because almost every gardener has such a device on the farm.
The lineup
There are various product variations, the use of which depends on the planting conditions. A correctly selected unit will help to cope with the work as quickly and efficiently as possible.
Manual fixture
The most economical option from the entire range of available products. Such a planter is easy to do with your own hands without special skills. This version of the device for planting garlic manually is suitable for those who own a large land lot and process it on their own.
Planter for motoblock
If you have no time to plant manually, use a marker compatible with the walk-behind tractor. This type of device is suitable for almost any technology, as it is connected using adapters, which are more than enough on the market. Although this method of planting requires additional waste of fuel for refueling equipment, it is notable for the speed of the procedure using a device for planting garlic manually in the country.
Four row marker
A distinctive feature of such a seeder is the accuracy of placing garlic cloves in the furrows. In one go, the device lands in four rows. This is ideal for spot planting garlic. It is used regardless of the type of soil on the site without loss of operational efficiency.
An assortment of home-made devices for planting garlic in the country
Before embarking on the implementation of the superidea for planting garlic in the winter with your own hands, decide on the design choice. Such tools are divided into three main groups. Consider them below.
Needle markers
As a basis for the adaptation, a board with a width of 25-30 cm with needle teeth placed in a square way is used. Such a device can be used not only for planting garlic, but also for other crops, and the depth of seeding and the distance between the teeth are determined based on the characteristics of planting cultivated plants.
Bar Markers
The design is based on a plank or board with triangular cross-slats stuffed on its lower side. Externally, the device resembles a mop, because a holder in the form of a handle is attached to the board. Cross rows are obtained by pressing the foot on the marker, longitudinal - when using a toothed, similar to a rake, seeder for garlic (hand seeder).
Serrated Markers
Externally, the design resembles a garden rake. Instead of teeth, triangular bars that prepare the bed for planting. Their parameters depend on the depth and pattern of planting garlic with cloves , onions or other crops that you are going to cultivate on the cultivated land. For the manufacture of such a structure, wood or metal is suitable.
What are the functions of a marker for planting garlic?
A garlic seeder should do the following:
- plant seeds to the required depth;
- keep a straight landing line, the same row spacing;
- place the teeth evenly.
Making a hand-held marker for planting garlic at home
Everything necessary for the manufacture of devices can be found in the country. From improvised items use pipe trunks, wire, wooden handles, handles from broken garden tools and more.
Since everything is clear with primitive versions of seeders, and you can make such a device even without instructions, try to figure out how to make a seeder for garlic with your own hands.
To make the device, you will need to acquire the corresponding components of the future mechanism. You will need:
- wheel;
- pens;
- control brushes;
- shaft;
- opener
- chain;
- container for seeds.
A double-bottom container is useful for adjusting crop density. By mounting an iron plate inside the tank and moving it, you can manually adjust the landing density, trying to arrange the planting material evenly.
Some gardeners put o-wheels on markers. This unit is made of two plastic wheels removed from a toy car or a children's bicycle. Sealing rollers can quickly complete the planting process.
More entrepreneurial farmers have a planter made from a seeder from a tractor, which is driven by a simple chain from a bicycle. At the same time, appropriate-sized wheels are used or they are manufactured independently.
Having a garlic seeder at home is a real find. Although many do without such devices, the marker is indispensable in the conditions of growing garlic in the country and in agricultural technology on an industrial scale. This not only simplifies the task set for the farmer or gardener - to plant plants, but also allows you to make seeding of seeds and planting material of high quality. Using such a device at the stage of garlic planting in the future, it is easier to care for the garden bed.