Miter saws are suitable for cutting wood at any angle. The obvious advantages of the modifications are high productivity, stability and convenient cutting control. However, in this case, a lot depends on the manufacturer of the saw. In order to understand the issue in detail, it is worth first of all to consider the device of the standard model.
Saw pattern
A homemade wood trimming scheme includes a gearbox, rotor, motor, carriage, and directly a saw blade. Many devices are made with a primer. The locks are suitable for them planetary type. It is also worth noting that the gearbox includes an adapter and another regulator. To start the modification, a starter is used. Modern devices are sold with different types of screens.
DIY device
Ordinary trimming on wood with your own hands is done quite simply. First of all, it is worth picking up a motor for modification. It is more advisable to take a single-phase model of low power. Additionally, a contact type starter is required for it. You will have to install it through the terminal box. The equipment frame is prepared from steel plates, which are rigidly fixed on the sides.
In order to install a depth gauge, a small plate is soldered. The saw blade must be secured to the stand. The motor is connected via the rotor. The output contacts of the model should be carefully isolated. The primer for many models is at the top of the structure.
Features of models with a double primer
Double primer saws are suitable for quick cutting of wide boards. Many models are manufactured on single-phase motors, and their frequency is 1,500 rpm. It is also worth noting that the devices stand out for their high performance. They do not need maintenance. Standard wood trimming is done with a planetary lock. Her rotor is mounted behind the adapter. Cases for models are used low density. In some cases, saw blades are fixed on racks. Starters are more appropriate to use contactor type. To increase the security of the modification, dampers are installed.
Reviews about Makita devices
Saws of the Makita company differ in high quality and productive motors. Many devices are nowadays actively used by professional builders. The maximum cut angle they have is 40 degrees, and the power indicator can reach a maximum of 3 kW. Devices differ in frequency as well as size. When choosing a modification, pay attention to the casing of the device. Normal wood trimming is done with one throttle. Adapters are used with metal clamps. Saw blades are changed using a key, which should be in the kit.
Opinions on saws based on two-phase motors
Trimming with a broach on a tree on a two-phase motor can work for a very long time. The level of overheating depends on the type of ventilation ducts. Modern modifications stand out for their portability. It is also worth noting that there are many devices with several ventilation ducts. Models with two handles are in great demand. The rotors of the models are used both with regulators and without it.
Good homemade wood trimming has a frequency of 1,700 rpm. Not all modifications are suitable for cutting boards. You also need to remember that throttle models are very expensive in stores. Most devices are made on manual starters. However, there are models with electronic analogues that are made specifically for professional builders.
Features of models with worm rotors
Saws with worm rotors are able to work with oak and even pine. They have good performance at low energy costs. Many builders prefer them because of their compact size and sturdy racks. Carriages are quite often used with overlays and are fixed under the motor. Standard wood trimming has a power of 2 kW, but is not able to boast of high frequency. Modifications with flanges are suitable for short-term operation. They have a very low efficiency.
Reviews about the devices of the company "Fort"
Saws brand "Fort" reviews, as a rule, receive a positive character. The models of this company are chosen for their high performance and high-quality adapters with locks. Guides are often made on the stops. Due to this, a high degree of stabilization at high speeds is achieved. It is also worth noting that there are modifications with distributors that are able to work at low frequencies.
Many devices are manufactured with spindle units. However, modern models do not have them. Use the knobs to switch modes. Rotors are often installed with an open stem. Support carriages are found with and without clamps. Quite often, wood trimming (pendulum) is used for cutting at a large angle.
Opinion on saws based on a 4 kW motor
Saws based on motors of 4 kW are suitable not only for cutting boards, but also for processing fairly wide bars. Many modifications are made with a primer. It is also worth noting that on the shelves, manufacturers provide modifications with two handles. In size, they are very different.
If we consider the standard model, then its frequency is 120 rpm. It is also worth noting that there are modifications with a channel cooling system. Throttles are used without an adapter. The rotors can be found mainly planetary type, which work through the control unit. Braking systems are used only chain type, and visors are used with protection.
Features of models with a cutter limiter
Saws with a cutter limiter are universal tools. Starters in versions can be used mechanical and electronic type. In this case, the primers are used with shutters. Some experts note the convenience of these devices. Limiters are installed, as a rule, under rotor boxes and do not take up much space.
Spindle units meet with clamps and without them. It is also worth noting that the market is filled with modifications on contact distributors. They are distinguished by increased frequency, and motors are mainly used single-phase type of small power. Shrouds are installed only on rotors. Therefore, they have a high noise level. However, there are professional tools. For normal operation of the limiters, open and closed rods are used. Torque is achieved using a spring.
Reviews on Interskol devices
Saws of this brand are made with worm spindles. Many models have several valves at once. Another distinctive feature of the modifications is a high-quality cooling system. Quite often, motors are used at 2 kW with a frequency of 1300 rpm. Spindle units are fixed under the rotors and do not take up much space. The rods are installed only closed type, and they do not need maintenance. Models are great for working with oak boards. Experts advise them for professionals. Also in the range there are a lot of goods at affordable prices.
Opinion on saws based on drive primers
Driving primers are in great demand now. Wood trimming of this type stands out for its performance. At the same time, motors for tools are installed in high power. Some experts advise choosing modifications only with a limiter. In this case, the rotor boxes must be closed. Do not consider modifications with junction boxes.
There should be cooling holes in the back of the modification. The motor must be in a tight casing. Anchor modifications with a frequency of 140 revolutions per minute are especially popular. Limiters are standardly used with rods. It is also worth noting that there are modifications with one handle that are lightweight and very compact. Such tools must be used to repair and cut small workpieces. There is a good trimming on wood (market price) about 25 thousand rubles.