Modern construction is gaining momentum. Buildings of 25 floors are not uncommon; higher cities are also found in large cities. That is why it is so important to observe safety measures at all levels, from the first calculations of a future project to the exterior finish. The embedded part plays an important role in the whole process. It allows you to interconnect various supporting structures, increasing the degree of their resistance to loads.
The materials of the fasteners are diverse, it depends not only on the place of their application, but also on the further purpose. To connect building blocks or high lanterns, metal is used, wood or plastic is used on less important objects.
In construction use embedded parts made of quality steel of a certain thickness. If you changed the lamps in your apartment, then you paid attention to the pieces of wood that are installed in the wall. They are fixed in advance so that you can then install the device. Plastic elements are used in the installation of pools. These are specially prepared places where various hoses will be connected in the future.
The manufacturing of embedded parts is influenced by the purpose for which they will be used in further constructions. Their shape is defined by the requirements of various standards. The main elements are metal plates and pins made of fittings. They can be interconnected, but sometimes the pins are replaced with bolts, thus, a detachable connection is obtained . By type, fasteners are divided into open and closed. They differ in the number of sites. In the first case, we have a metal plate with welded rods. In the second embodiment, additional metal pads are located at the ends of the pins. They allow more rigidly interconnecting building blocks.
In the direction of the pins, the embedded parts are divided into several groups. This can be a perpendicular arrangement of the rods or inclined, at an angle to the plate. The pins can be parallel or directed in different directions. The size of the plate and the length of the rods are determined by the brand of embedded parts. The metal base itself is made in the form of a rectangle or square. Sometimes they use a rod with a loop or ring instead of a plate, this form is more suitable if it is necessary to fix various communications.
Embedded parts are connected together by welding, glue or bolts. It can be a joint in brands or overlap. Each option is interesting in its own way, but it should come from a specific place where the details are applied. If an
adhesive joint is used, it is necessary in laboratory conditions to select the most suitable composition designed for the loads that are planned to withstand.
When installing modern poles for lighting streets or various supports, embedded parts are also used. First, the lower part is fixed in the form of a pipe with a round or square flange. Then the upper mast is attached to it with the help of studs or bolts. An anchor mortgage is distinguished by a base, it is made of a set of pins connected by a conductor on top and bottom. For all metal parts to last longer, they should be protected from the effects of weather conditions. The use of a primer, paint or zinc coating allows you to increase their service life.