To reduce water costs, most people set a meter. Because you need to pay on the meter much less than at established state average prices. Due to the installation of a water meter, it is only necessary to pay for the liquid consumed. According to reviews, the Betar water meter is considered a particularly high-quality water meter at the present time .
Manufacturing company
Betar is one of the largest manufacturers of meters for metering water and gas consumption in the Russian Federation. In addition, the company manufactures components for plumbing devices. It should be noted that the manufacturer produces devices only under the name "Betar" and is completely irrelevant to the creation and manufacture of other commercial brands.
At present, Betar manufactures thirty-seven branded products. It:
- Hot and cold water meters: 15 and 20 mm across, with magnetic protection and remote write-off of accounting information.
- CBM industrial water meters: 25, 32 and 40 mm across.
Counter Assignment
Water meters are necessary to account for the amount of hot and cold water running through pipes with temperatures from + 5 ° to + 40 ° for cold water meters (CW) and from + 5 ° to + 90 ° for water meters that take into account hot water (CW), the pressure is not more than 1.0 MPa or 10 kgf / cm 2 .
According to reviews, the Betar water meter lacked a check valve. They satisfied the customers ’requirements - they placed a shut-off inverse hydraulic valve in the water meter, which prevents the liquid from flowing in the opposite direction.
Meters are recorded in the State Register of Measuring Instruments of the Russian Federation under No. 16078-05. Raw materials and components used in the production of water meters are allowed for use by the Ministry of Health of the Russian Federation.
Types of Counters
Betar water meters are specialized for home and industrial use. For home use, the company produces the following metering devices.
Antimagnetic type:
- SHV-15, SGV-15 and similar;
- SHV-20, SGV-20 and a similar design.
Remote models:
- SHV-15D and SGV-15D;
- SHV-20D and SGV-20D.
With a radio channel:
Home water meters are necessary to account for drinking water consumption of + 5 ° to + 40 ° and hot to + 90 ° with a pressure of not more than 1.0 MPa or 10 kgf / cm 2 . Buyers leave feedback on the Betar hot water meter SGV-15 as fully meeting the requirements of domestic and foreign GOSTs. Magnetic-shielded fluid consumption measuring devices are not susceptible to magnets with an influence field of up to 140 kA / m.
Devices of the type SGV-20D are used for automatic consumption measurement systems. According to reviews, the Betar water meter SHV-20D with a radio channel is installed in pipeline wells or in the basements of high-rise buildings. Such a device facilitates the collection of data on the amount of water consumed, without requiring a descent into the basement or well.
The Betar company, whose water meters are regarded as the best and most reliable in the Russian Federation, also produces industrial devices for measuring consumption. The components used in the manufacture of devices are allowed for use by the Ministry of Health of the Russian Federation.
Specifications
Measuring instruments measure the waste of water at temperatures from plus 5 degrees to plus 90 under pressure not higher than 1.0 MPA. They are installed on water pipes with a volume of 15 mm. Designed for a passing amount of water of 1.5 m 3 / h. Sold complete with two union nuts, two gaskets, two threaded fittings and instructions for use. When assembled, the meter is 172 mm long. Water meters can be equipped with an inverse hydraulic valve. In other matters, these devices are exactly the same as all water meters of a given type and category, both in function and in technical compliance.
Water meter universal "Betar" SGV-15 M3
The Betar hot water meter is universal made of heat-resistant components, therefore it is used to account for the consumption of both hot and cold water. Protection against magnets is due to the original separation of the domains and the field of magnets of the measuring device itself. It is possible to install water meters in horizontal, vertical and inclined position of the scale on vertically arranged pipes.
Water meter SHV-15 "Betar"
The Betar water meter takes cold water into account at temperatures from +5 degrees to +40 at a pressure of up to 1.0 MPa or 10 kgf / cm 2 . Components are made from materials approved by the Ministry of Health of the Russian Federation. Installed on pipes with a diameter of 15 mm. The length of the device is 172 mm in assembled form, the weight of the meter without accessories is half a kilogram. The device is under warranty for six years, between inspections the time interval is also six years.
Water meter "Betar" SVM-32
The counter of cold and hot water "Betar" multi-jet winged SVM-32 can be purchased with initial calibration. The device measures the amount of hot and cold liquid used at a temperature of + 5 ° ... + 90 ° with a pressure of not more than 10 atm. When the counter is working, the rotation of the impeller during the movement of water turns into the value of the meter on the meter counter. The SVM-32 water meter does not have a radio channel, therefore the meter is checked for hot water once every four years and for cold water once every six years. Installed on pipes with a diameter of 32 mm. When assembled, the device reaches 260 mm in length, with fittings of 380 mm. The dimensions of the device are 260x115x120 mm, weight 2.8 kilograms.
Antimagnetic protection
In the structure of the water meter there is a magnetic fluid coupling for transferring rotation from the impeller to a data meter. In fact, it is a magnet pushing another magnet, turned to it by the opposite pole. The pushed item is associated with the watch-keeping mechanism. The watch has a set of gears with the numbers painted on them. When the fluid moves, the impeller rotates, and on the panel of the device there is a change in the numbers.
To protect the water meter from magnetic influences from the external environment, in order to avoid distortion of water consumption data, a device protection system has been made. It protects the coupling magnet from efforts from outside to stop the metering device by applying a magnet to it.
For the most effective protection of the counter from attempts to stop, an anti-magnetic seal was developed. As the magnet approaches the water meter, the seal is destroyed. Such a sticker is simply glued to the body of different materials: plastic, polished wooden boards, glass, iron, paper and painted surfaces. It is easy to apply, but in fact it cannot be removed without breaking the seal.
Customer reviews
Buyers are satisfied with water meters, according to reviews, the Betar cold water meter is used to control water costs, ICS 15-1.5 are used for hot and cold. The device withstands pressure up to 1.6 MPa and a temperature of +5 ... + 90 degrees, the amount of water passage per day is 37 cubic meters. We can say about the meter that it saves money about three times a month.
This indispensable device gives excellent results. It is inexpensive, unpretentious in installation, comfortable to use. In the package, along with the counter, there is absolutely all the packaging, so you can put or replace with another one yourself, without calling the master.
The meter works stably even when exposed to an external magnet, therefore, you can’t specifically stop it. The principle of operation is associated with the rotation of the impeller while promoting the flow of water. The amount of fluid used is calculated in cubic meters. Looking at the credentials on such a device is very handy. In the reviews of the Betar water meters, users recommend that everyone purchase and install them.