If you like to do needlework, then you just need to build a machine for embroidery with your own hands. Make it easy. As for the material, it all depends on your capabilities. You can purchase plastic pipes or wooden slats for work .
The advantages of the presented design
It should be noted that the do-it-yourself embroidery machine made according to this instruction has many positive qualities. This, for example, such as:
- simplicity of design;
- low cost of the device;
- the ability to choose the dimensions of the machine (height and width);
- taking into account all the needs of the needlewoman;
- light weight;
- strength.
During the construction of the presented design, you independently determine what size of fabric the frame should be designed for, with which it should be attached. If necessary, you can equip your machine with additional lighting. In addition, you can easily make the device sofa or manual type.
What materials are needed to work?
In order to make a machine for embroidery with your own hands, you first need to pick up all the necessary tools and materials. You will need:
- drill;
- grinder or jigsaw (for cutting strips or pipes);
- fasteners (bolts or screws);
- wooden slats or pipes (in this case, you also need to purchase fittings and clamps);
- rubber foot pads (if the structure will be installed on the floor).
In principle, these materials are quite enough to make a cross-stitch machine .
Construction Instructions
Consider the main stages of manufacturing the presented product, regardless of the selected material. It is after this that you need to start making a machine for embroidery with your own hands.
- First, we begin to manufacture the rack on which the frame will be located. To do this, 6 wooden slats are needed, 2 of which should be short, and the rest - a little longer. They must be assembled into a single design. It should be fastened with bolts or self-tapping screws, however it must be done so that the supports are stable and durable. If you are going to assemble a machine for embroidery with your own hands from pipes, the principle of action is the same. Just to connect the elements you need fittings and clamps.
- Now you need to make a frame on which the fabric will be fixed. To do this, connect 4 rails. Their length depends on the size of the frame itself. It must be installed on a special beam mounted on legs. Please note that the frame must be extendable so that you can easily change its size based on the dimensions of the embroidery.
- To build a sliding bar, you need to take a rail with through slots. In this case, an indent from the edges of about 2 cm should be present. Small wooden elements are inserted into the slot, and another plank is nailed to them. This way you can enlarge or reduce the frame.
- Now attach the prepared part to the legs. To do this, screw the bolts in the central part of the side rails - so you can turn the frame up or down. At the edges of this element should be attached latches that hold it in a certain position.
Basically, now you know how to make an embroidery machine. This instruction shows the main course of work. The construction of additional facilities, as well as the design of the product itself, you choose. Naturally, before starting any action, you need to draw a machine on paper and do all the necessary calculations.