Most summer residents have a question about how to ensure watering their crops. There are two main ways to extract water - a well and a well.
What kind of water are there?
First you need to get information about the hydrogeological condition of your site - this will help make a decision. You should be aware that groundwater is divided into the upper, groundwater and artesian. High water is the water closest to the surface of the soil. To a greater extent, they depend on the amount of precipitation. Such waters appear in the spring, after the snow melts. The tip of the water is not suitable for drinking, since, passing through the ground, such water becomes cloudy. But you can use it for watering, but there is a chance that during the heat the mentioned moisture will disappear altogether. In autumn and winter, it practically does not happen.
Groundwater is at a depth of approximately 5-10 meters. They are located under a layer of soil in the sand (for which, in fact, they got this name). This water can be used not only for technical purposes, but also as a drink or for cooking.
Artesian water lies at great depths, under a layer of clay and limestone. It is considered the most clean and useful.
Well or well?
To answer this question, it is necessary to understand the features of the mentioned moisture sources. Consider the difference between a well and a well. A well is dug at a depth of the tip or groundwater. The walls of the well are reinforced with stone, concrete or wood. As scooping up, the water collects itself.
A well is being drilled by a drilling rig. After that, a steel pipe is laid, connected by thread or welding. A plastic pipe is inserted inside. A filter for mechanical water treatment is also installed. The fluid is supplied by a water pump. Of course, building a well is easier than a well, and it will cost a lot less. But the advantages of the well far surpass such a disadvantage as the cost of installation.
Why is a well better than a well?
Firstly, a high degree of water purification. It is drilled to great depths (as a rule, about 10-30 meters - depending on the selected area). Water passes through at least five natural filters: soil, sand, gravel, limestone, etc. And if you drill 100 meters or more and reach artesian waters, the filtration increases several times. The well may dry out from time to time, for example, during a drought. In the well, due to the fact that it is much deeper, there is always water, and there is a lot of it. This is especially important if the site is large, and a lot of water is required for irrigation. Surely this circumstance will help determine what the well is better than the well. It is also worth noting that the water supply from the well is not too laborious and more modern, the technological process. Depending on the power of the pump, you can provide your country house with all amenities and communications. Why is a well better than a well? Yes, the fact that you will not feel divorced from civilization, and you can enjoy comfort. If you have enough means and capabilities to
drill a well to the depth of artesian waters, then this would be an ideal option. First of all, you will have clean and tasty drinking water. Artesian waters come from the well under natural pressure, and have the ability to self-flow, and even to gush. This is another answer to the question: "Why is a well better than a well?" But, in any case, the choice is yours.