Recently, the trend of installing a hanging toilet bowl has become fashionable. This option for installation work is considered quite affordable. Among other things, it is more hygienic, as the hostess will not have problems when washing floors. Some home craftsmen are of the opinion that a hanging toilet, the price of which may be slightly higher than usual, is an unreliable design. It's not like that at all. Before purchasing, you will be able to independently choose the dimensions of the hanging toilet with installation, this will effectively distribute free space.
The statement of insecurity cannot be called justified. Using a standard frame, you get a guarantee of safety margin, among other things, it can withstand up to 800 kilograms. If you use fasteners without installation, then it will withstand 400 kilograms of weight. If you decide to purchase such plumbing equipment, then you need to familiarize yourself with the installation procedure.
Preparation for installation
A hanging toilet, the price of which can vary between 2000-15000 rubles, should be mounted after preparatory work. In the process of manipulation will have to use a ready-made frame, which remains to be fixed, and then collect all the components. The master must take into account that the finished frame is quite expensive, so the entire installation option will be costly.
A wall-mounted toilet, the photo of which is presented in the article, can be installed on a monolithic base made of concrete. In this case, the device must be mounted on the release of the rods that are attached to the supporting wall. As a function of a monolithic base made of concrete, holding the bottom of the plumbing fixture acts. A coupling must be located in the concrete structure, which is designed to ensure the discharge of sewage.
Technology of work
If you decide to purchase a Vitra wall-mounted toilet, then you will initially need to mount a flushing sleeve. After that, the master must determine the height at which the device will be located. If necessary, you can make adjustments. To do this, the coupling is cut off, or the pipe is expanded using a pipe. Professionals recommend the use of formwork panels with a margin of 5 centimeters or more.
If you use the installation instructions, you should know that it requires the most accurate measurements between adjacent mounting holes. Most often, 20 centimeters are chosen as the optimal figure. A board, OSB or chipboard is perfect as an account.
Wizard Recommendations
The Villeroy wall-hung toilet is installed using the technology described in the article. Please note that before making holes you need to attach the product to the formwork. This will allow you to check how correctly the markup is done. A figure within 5 millimeters acts as the maximum deviation.
In the next step, you will need to cut the threaded rods of the desired length. In this case, the depth of the hole should be added in increments from the toilet to the wall, adding to this figure the thickness of the plumbing fixture at the installation point and the length of the free end, which will be necessary for the exact tightening of the nuts.
Installation work
Initially, you have to determine the height of the installation of the suspended plumbing fixture. Fixation will be made through the wall, while it will be necessary to prepare the M-20 nut, as well as the washer. This method can be called as simple as possible, as well as universal, while walls can be based on absolutely any material.
The main condition is the resistance of the walls to bending. You will be faced with the task of drilling them through. After that, you have to install the rod and put the washer on it. At the last stage, tighten the nut.
Fixing the toilet to the strongest walls
If you purchased a hanging toilet with a micro-lift, then it can be installed on very strong walls, and the master will not have to make a through hole. The core can be fixed with an adhesive designed for concrete. In this case, we are talking about a chemical anchor.
This approach will ensure maximum reliability of fixation in the walls, which are made of durable material, namely solid or hollow bricks, concrete blocks or wood.
Wall strength
In this case, the wall must be designed for the effects of mid-level loads, whose weight is 400 kg or less.
If the walls in the bathroom are made of insulating aerated concrete with a density of less than 400 kilograms per square meter, then fixing with this technology should be discarded.
Methodology
In order to install the Delfi wall-hung toilet, you need to drill a hole with a depth of 15 centimeters. It will need to be well cleaned of the dust formed, and then pour glue inside. The master must install the rod, and then mount the shields. The first of these is the central one, in which the holes for the rods are located. The second shield is the one on which the toilet will be fixed, while the third will become lateral - when it is mounted, you can close the outlet holes of the coupling.
What to look for
It is important to analyze how correctly the shields are located. To do this, use the building level. The next step will be the installation of rods for fixing the plumbing fixture. In order for the formwork to become stable, it is necessary to tighten the nuts that will hold the suspension device.
The nuances of the work
When installing a toilet bowl, the photo of which is presented in the article, you need to check how accurately the markup was made. If there is a need, you can make some adjustments until the concrete is poured. In order to form a recess in concrete, you need to fix a piece of foam, this will subsequently allow the connection of the drain to the device.
Pouring concrete
To carry out this stage manually or using a concrete mixer, you need to prepare a special mixture, which will consist of crushed stone, cement, sand and water. It is important to close the threaded rods with a film to prevent the mixture from falling onto them accidentally. To seal concrete, it is necessary to pierce it, which is especially true for corners. Formwork must be left for one week at room temperature.
Reviews on connection features
While still in the store, you should check the wall-mounted toilet set - the only way you can carry out the correct installation. As noted by home craftsmen, a corrugation with a diameter of 4 centimeters must be installed in the notch of a plumbing fixture. Water is drained to the stop, and after that, the free gap must be filled with universal sealant. Experts advise: for fixing the corrugation must be kept for 3 days at room temperature. Home masters recommend: before installing the toilet , you need to use silicone sealant, which is applied to the joints of the device with the rubber ring of the corrugation.
The toilet should be put on the mounting outlets of the rods, and then install the washers and tighten all with nuts. This design is maintained during the day, after which you can proceed to connect the drain tank to the toilet using a flexible corrugation. At the final stage, as consumers say, you can install the lid of the plumbing fixture. On this we can assume that the installation is completed.
Dimensions of toilet bowl with installation
If you are interested in the dimensions of the wall-hung toilet with installation, then you should more carefully deal with this issue. Here it is necessary to pay attention to some nuances. Manufacturers emphasize that the dimensions of this plumbing fixture are much smaller compared to the dimensions of a traditional toilet. This belief can be considered correct and erroneous at the same time.
If you plan to install such a device inside the bathroom of Khrushchev, then, alas, you won’t be able to win with dimensions. Everything is due to the fact that the installation will occupy a certain space in the false wall. After installation, the dimensions of the hanging toilet with installation will indeed seem smaller, however, the room itself will be reduced in size for the reason that communications will be hidden behind the partition.
For owners of private houses, where there is no problem of lack of free space, the use of a suspended plumbing fixture is the most optimal solution. This model looks compact and modern.
Conclusion
If you are interested in the dimensions of the hanging toilet with installation, then it should be noted that such a device will take up more space in the bathroom compared to conventional analog sanitary fixtures. However, the room will look aesthetically pleasing, this must be taken into account when choosing a design. Only in this way will you be able to equip an interior that will look good and will suit all households.