Each workshop should have a woodworking machine. If you like to work with this material, then you will also need such equipment. However, before choosing it, it is necessary to take into account some factors, among them the width and depth of planing, the maximum drilling depth and the length of the workpiece should be highlighted.
It is important to pay attention also to the type of bed. Welded equipment is used in small and medium-sized industries. With this setup, you can process medium-sized parts. If you purchase a plant with a cast bed, then you will operate it when processing large products. These devices are more expensive.
If you can not make a choice, then you should consider at least one of the models that are offered in a wide range. Among others, we can distinguish the "Master Universal 2500E", and this will be discussed below.
Key Features Reviews
The above design will cost 20,000 rubles. It is a universal high-power woodworking machine. According to consumers, the machine can perform a wide range of tasks, namely:
- planing on a plane;
- longitudinal sawing;
- milling;
- drilling;
- cross cutting.
"Universal" is in demand among professionals in its field. It is acquired by carpenters and joiners. However, beginners also do not bypass this installation. An important design feature is the presence of an electronic unit, which is indicated in the name by the letter āEā. The device can be started even at low voltage.
Consumers especially emphasize that the Master Universal 2500E has high technical parameters, two knives and a temperature relay in the kit. Basic equipment provides for:
- special adapter for chip removal;
- saw table;
- clamping device;
- planing table;
- rulers;
- spare parts for cross cutting at an angle.
The master needs a ruler for planing and sawing. The package also involves personal protective equipment, which especially attracts buyers. The machine is certified according to the system of state standards.
Technical Specifications Reviews
The 2500E Master Station Wagon has outstanding features. Among them, consumers distinguish an induction motor, as well as an impressive power of 2,500 watts. The engine runs in S6-40 mode. As for the number of revolutions, this value reaches 5,500 per minute. The thickness of the saw blade is 1.8 mm.
Buyers like the width of the knife, it is 250 mm. It is impossible not to mention the outer as well as the landing diameter of the circle. These parameters are 280 and 32 mm, respectively. Experts note that with the help of the machine it is possible to provide a rather impressive cut depth, which is equivalent to 100 mm. The minimum cutting height is 3.5 mm.
Consumers emphasize that when choosing the described equipment, they pay special attention to the maximum depth of cut at an angle of 90 Ā°. It is 100 mm. "Master-universal 2500E" has tables that are designed for milling, planing and sawing. The dimensions of the first are 370200 mm, the second - 882318 mm, while the third - 750510 mm.
The engine is reliably protected from an overheat. The manufacturer also took care of the possibility of starting at low voltage. The design provides for the presence of two knives in the kit. Consumers like the low weight of the device, it is 61 kg. The supplier provides a one year product warranty.
Positive feedback
If you are also interested in the Master Universal 2500E machine, then you should also familiarize yourself with additional features, among which are:
- accuracy in work;
- design reliability;
- the ability to quickly turn off.
As for accuracy, it is provided by an emphasis with a scale that allows you to position the workpiece at a given angle. Buyers also note the reliability of the design. It is guaranteed by a wide base and dampers on the support legs. All this indicates the stability of the equipment on the base, as well as the maximum reduction in vibration.
After reading reviews about the "Master Universal 2500E", you can also understand that the equipment can be quickly turned off. The emergency shutdown button is responsible for this. If you encounter a problem, you can use it.
Appointment Reviews
The above machine is a combined woodworking household equipment. It is intended for:
- drilling and milling;
- sawing and planing;
- jointing.
You can use wood in your work. The machine has three configurations or functions, which, according to customers, expands the scope of its use. "Master-universal 2500E" is a universal machine, which is the most powerful in the lineup. An electronic unit acts as an additional unit that is installed on the device. Using it, you can start even at low voltage, its minimum value is 160 V.
Range of tasks
Buyers like that with the help of this equipment you can perform a wide range of tasks, carry out:
- planing;
- sawing up;
- straight planing;
- sawing along the fibers;
- drilling;
- sawing across the fibers;
- milling by end mills.
More about features
Planing can be done along the edges, at an angle and along the ribs. Additionally, you can use the clamping device. The reviews about the Master Universal 2500E machine indicate that the equipment copes well with cutting both across and along the fibers, and you can set a certain depth. If you need to cut along the fibers, you can use the guide ruler. Home masters especially emphasize that they often have to choose quarters, in which the described equipment has no equal.
Finally
Above the planing table of the machine is a laid-on saw table, which is used to cut a wide bill. The table is adjustable in height, which allows you to set the protrusion of the saw above the material depending on the thickness. The universal machine "Master Universal 2500E" provides high-quality cutting and safety during transverse and longitudinal cutting at an angle to the fibers. In confirmation of this, it can be noted that the device helps to qualitatively cut sheet materials.
To mount the saw blade, a flange is mounted on the output end of the blade shaft. Additional attachments to the machine are knots for planing in the form of a clamping device, end mills for drilling, as well as a device for transverse sawing. The installation is powered by a single-phase AC network. The source of electrical energy must have a protection that is designed for a fuse current of 16 A.