Despite the huge popularity of foreign household appliances, the domestic industry also manufactures high-quality equipment. For example, Sibiriya gas boilers have many advantages and high quality. You can use this equipment for heating not only residential, but also industrial premises.
Product advantages
Gas boilers "Siberia" have the following advantages:
- Almost complete independence of ignition from the electric network, since it is carried out due to piezoelectric elements.
- High quality equipment.
- Ease of use.
- Long term of operation.
- Great look.
- The variety of models.
- Different boiler capacities make it possible to choose the appropriate option.
- Automatic control. Thanks to this, the operation of the product is completely safe.
- Low fuel consumption.
- There is an opportunity to purchase models with which you can additionally heat the water.
- Burner resistance to high temperature. Thanks to the stainless material that has undergone a special treatment, you can not worry about premature burnout of the element.
- High structural strength.
- Some models provide several points of intake with hot water at once.
- Acceptable cost: from 15,600 to 24,000 rubles.
As you can see, Sibiriya gas boilers are practically inferior to foreign competitors.
Lack of equipment
However, the presented products have some minor disadvantages:
- To install the boiler you will have to obtain permission from the gas service.
- Place the structure only against the wall.
- Since the unit runs on gas, it has an increased fire hazard.
- It is necessary to take care of the presence of a chimney.
- For floor models, it is most often required, albeit a small, but separate room.
Device features
So, Sibiriya gas boilers have such operational features:
- The flame size is automatically controlled, and this is done very smoothly.
- The device has a very high level of efficiency - up to 90%.
- The device is able to heat rooms with an area of 100 to 500 square meters. m
- The heat exchanger can be open or closed, it all depends on the model of the device.
- The temperature of water and heating is regulated separately, which allows the use of a gas heating boiler "Siberia" as a boiler in the summer. The heating system remains off.
- The presence of additional functions: anti-lock circulation pump, resistance to contamination and freezing.
Specifications
The gas boiler "Siberia" (reviews about it are mostly positive) has the following technical parameters:
- Warranty Duration: 25 years.
- Power: 11-35 kW, although devices designed for 50 kW are used to heat industrial premises.
- The total mass of the product is 52-90 kg.
- Efficiency - not less than 90%.
- The possibility of converting the device for liquefied gas.
If you want to buy a Sibiriya gas boiler, the reviews will help you learn more about it than the manufacturer says. For example, buyers note the high efficiency of the equipment. The unit is able to quickly heat water, even if the house has several points of intake. The device copes well with the task, even if it is installed in a house with several floors. An undoubted advantage is piezo ignition, so you can start the boiler even in the absence of light.
Types of devices
The gas boiler "Siberia", the characteristics of which we have already examined, is manufactured in various modifications. For example, all products of a manufacturer can be divided into 3 types:
- Floor single-circuit. Their feature is a cast-iron heat exchanger, which is characterized by increased power. Such an apparatus is most often used for large houses or structures consisting of several floors.
- Floor bypass devices. They are equipped with a stainless steel and stainless steel heat exchanger. Such devices are intended not only for heating the room, but also for receiving hot water.
- Wall mounted. These devices are lightweight, compact in size and high performance.
Line of models
The floor gas boiler Sibiriya is most often used for heating large buildings. However, you should consider all product lines presented by the manufacturer:
- AKGV and AOGV. These devices are installed on the floor. Their power ranges from 11 to 35 kW. The heat exchangers in them are often made of carbon steel. Models ACGV are double-circuit, and AOGV are single-circuit. The equipment presented is able to warm rooms with an area of 125-400 square meters. m. At a heating temperature of 35 degrees, you can spend 3.8-8 liters of hot water per minute.
- CCHO. The line of these devices is characterized by high power: 16, 25, 40 and 50 kW. Such boilers are intended for heating very large houses, industrial or storage facilities. The heat exchanger in this equipment is made of cast iron.
- Top Line. These are wall devices with a power of 24 kW. They are equipped with biometric copper heat exchangers. They are capable of serving several points of water intake. Most often they are used in those houses whose area does not exceed 200 square meters. m
- Aqua. These devices are intended, rather, for heating water. Their power ranges from 18-23 kW. The speakers have a piezoelectric or electronic ignition.
How to choose the right equipment?
Gas boiler "Siberia" floor (you have already read the reviews) is very effective and economical. However, you need to choose exactly the option that is suitable for your structure. Here you should consider the following parameters:
- The power of the device. The higher it is, the more area it can heat. Naturally, the more power, the more fuel will be needed. This parameter is always written in the model name. For example, Sibir-11 has a power of 11.6 kW.
- The size of the heated room. It can be found technically at home. Calculate the power of the device in this case is not difficult. For every 10 square meters. m of area required 1 kW of energy. However, the equipment should not be used to the limit of its ability to reduce the likelihood of wear of its parts. Therefore, it is better to increase the resulting power result by a third.
- Climatic conditions.
- Home decoration. This parameter is also of great importance. For example, you can use facing material with additional insulation.
- Availability or need for hot water supply.
- Type of apparatus. If you want to install equipment in the apartment, then it is better to give preference to wall models. For the home, it will be the best floor option.
- Type of heat exchanger. Experts advise giving preference to a cast-iron product, since it is more durable and durable.
Hardware Installation Rules
Floor gas heating boilers "Sibiria" should be installed by a specialist who has a license to carry out such work. It’s better not to do it yourself. Moreover, you still have to get permission to install.
So, the installation of equipment has such features:
- To begin with, you should apply for permission in the gas service.
- Installation must be carried out by specialists with a special license for working with heating equipment.
- Since the expansion tank and the circulation pump are not supplied with the equipment, these parts will have to be purchased separately.
- Since you have to install the boiler against the wall, it is necessary to provide a gap between the device and the base. This distance is at least 3 cm.
- To install the floor unit will have to make a foundation. Most often it is equipped with brick. The wall version needs to be fixed very firmly.
- Connect the equipment very carefully so that no gas leaks are detected. That is, all compounds must be carefully insulated.
- Please note that condensation may occur on the heat exchanger during the first start-up of the equipment. However, this phenomenon is temporary, since after heating the unit it disappears.
If you want to install a Sibiriya gas boiler, the installation and operating instructions must be strictly observed.
Rules for using equipment
So, the heating equipment will last longer if you follow the rules of operation:
- The unit must not be switched on if the burner is defective or the chimney is not cleaned.
- The boiler body must be earthed.
- If instead of water you want to use antifreeze as a heat carrier, then it must be certified. The liquid must not contain ethylene glycol.
- Do not bring the water in the system to a boil (heat more than 95 degrees).
- If the boiler is installed near a wall lined with combustible materials, it should be protected by a gasket made of steel or asbestos sheet.
- The equipment can only be turned on after the system is filled with coolant.
- Be sure to once a year clean the chimney, filters and check the tightness of the connections, rinse the burner.
Floor-mounted gas heating boilers "Sibiria" is a domestic competitor to foreign appliances, which can be bought cheaper, and it will last longer.