A house made of SIP panels, the pros and cons of which will be discussed below, is a building that consists of material created by the type of a sandwich.
Plate Layering
The plates consist of three layers, a sufficiently strong sheet is used as the outer ones. It is represented by oriented chipboard, wooden boards, fiberboard or magnesite plates. The thickness of the paintings varies from 9 to 12 millimeters. Most often in SIP panels for the construction of houses used OSP-3, whose thickness is 12 millimeters.
general description
The house of SIP panels, the pros and cons of which should be considered before starting construction, consists of material collected from three layers. In the role of the central part, a heater is used, namely polyurethane foam, mineral wool or polystyrene foam. The thickness of the material can vary depending on the needs of the customer and varies from 50 to 250 millimeters. The most commonly used polystyrene PSB-25 or PSB-S-25, whose density is 25 kg per cubic meter. The outer layers are connected to the core during production under the influence of high pressure. As a result, it is possible to obtain a durable composite material.
Positive characteristics
A house made of SIP panels, the pros and cons of which are presented in the article, has excellent thermal insulation qualities. It was possible to achieve this at the lowest cost if we compare with other popular materials that are used in the construction of walls. This implies an equally important advantage, which is that such buildings are considered the largest in terms of area of premises, which is true with the same type of development. While the rooms are cozy and very bright. This is what primarily consumers like most. This effect was achieved due to the insignificant wall thickness. Due to the low heat capacity of the walls, such buildings do not have to be heated for a long time. This is great news for those who prefer to spend a weekend outside the city. In such cases, you can not be afraid to turn off the heating during the absence. Everything is relative. Thus, warming up and heating a wooden or brick house will be much more difficult. While a house made of SIP panels has low thermal conductivity, this allows you to store heat in severe frosts.
Soundproofing and construction speed reviews
Modern owners of private houses within the city and apartments in multi-storey buildings note that they have to carry out manipulations to combat extraneous and external noise. The described buildings have excellent noise absorption characteristics, as noted by the owners of such housing. This quality was achieved, despite the significant thickness of the walls. Reviews of houses made of SIP panels indicate that such buildings are lightweight, which is especially noticeable when compared with wooden, concrete and brick buildings. If you yourself will carry out the construction, you can save on the formation of the foundation, making it light, shallow. There will be no additional load on the base. As private developers emphasize, this feature is very attractive to them.
It should be noted, according to modern consumers, that SIP panels are very economical. Among other things, it’s quite simple to work with them. During operation, this material also shows itself very well. If you decide to buy a house from SIP panels, it is important to read the reviews of living people. In them you can find information that construction and installation work does not involve large expenses.
Opportunity to save
You do not have to rent special equipment, which saves you money. If you decide to independently do these works, then you have to stock up on the help of only 3 or 5 people. In this case, it is not necessary to have special skills. Construction will take only 2 weeks. This makes buildings of this type very attractive for professional and private craftsmen.
Environmental friendliness and aesthetics of appearance
If you want to build a house from SIP panels, the reviews of those living should probably interest you. They indicate that the material is characterized by perfect evenness. During operation, it does not lose its advantages and attractiveness. This indicates that there is no need to align the walls after work. Thus, finishing work is done to a minimum, while such manipulations can be started immediately after the assembly of the house is completed. You can not be afraid of shrinkage processes, and during the construction process you will manage with an elementary set of materials and tools that almost every owner will find. One-story houses from SIP panels are assembled using technology that cannot be called too dirty. In this case, a minimal amount of damage to the landscape and the environment is done. Among other things, you can start construction work at any time of the year.
Minuses
The house from SIP panels is a combustible building. Among the additional disadvantages of the material, one can single out its attractiveness for rodents. This list can scare away and confuse the customer and the developer. However, as you know, any material is fraught with many errors. You can even recall some materials that have more impressive side effects. Thus, if the walls are non-combustible, then this does not at all indicate that a fire cannot occur, since not a single building is insured from a fire. This is due to the fact that the reasons are not the material that underlies the construction, but many factors, including faulty wiring. If you decide to choose a house from SIP panels, pros and cons, reviews about such a building should be studied in advance. This will let you know that the wiring is equipped according to the rules that apply in the construction of wooden houses. Thus, it should be open, which is not always liked by future owners. The problem with rodents, admittedly, is somewhat exaggerated in relation to SIP panels. This is due to the fact that animals are interested in insulation, which can not be said about the paintings that are used in the construction of walls.
Negative reviews
If in the near future you are planning to purchase a house from SIP panels, it will be useful for you to find out the owner’s reviews. They can be not only positive. Consumers note that they do not like the need for ventilation. This is due to the fact that the buildings are overly airtight, and without a supply and exhaust ventilation system it is quite uncomfortable to be present in the premises. Many note that after settlement, despite the assurance of the builder that there is no such need, it becomes necessary to install additional layers of sound insulation. You can also feel some vibration that occurs when closing and opening windows and doors. However, this, at first glance, negative feature may seem very subjective. If you read reviews about houses from SIP panels, then surely pay attention to that feature, which is the lack of the ability to make strobes in the material. When laying electrical wiring, you will need to use metal corrugations. If necessary, you can still work on decorating engineering and communication systems, however, such manipulations will involve additional financial costs.
Durability
If you decide to build a house from SIP panels, the reviews of the owners will help you make the right decision. Many modern consumers pay attention to the low durability of Canadian homes. Developers promise 50 years of operation. This factor directly depends on the quality of the materials used. If there is a desire to extend the life of the building, it will be necessary to carry out the exterior decoration of the facade. In this case, you need to count on a significant increase in the cost of construction. But such costs pay off after a while.
So, we examined the advantages and disadvantages of such a construction as a house made of SIP panels. Pros and cons, photos presented in this material will help you make the right choice.