If you decide to purchase a water-cooled electric tile cutter, then by visiting the store you can familiarize yourself with a wide range of such products.
Need to use
It is recommended to purchase electric models only if it is supposed to carry out work in large volumes. With the help of such a machine it will be easier to cut tiles, the master will be able to increase the accuracy of work and reduce the amount of marriage. The unit must be equipped with a water cooling system so that the life of the device is longer. Among other things, if the tool is not equipped with such a system, then it is highly likely that the product will burst under the influence of high temperature, which occurs during the friction of the cutting element.
It is water cooling that acts as the best option, since the tile almost does not heat up, and the cut line is perfectly flat and without chips. For liquid, a special tank is provided in the unit, from which water is supplied to the cut area at the command of the master. Among other things, you can find stationary options, as well as mobile ones that resemble miter saws. The latter are electric hand tools, characterized by mobility. But for convenience, stationary-type machines occupy the first positions.
Reviews of the main criteria
If you decide to purchase a water-cooled electric tile cutter, then, according to users, you need to pay attention to a number of the following criteria. Among the first, the assembly and engine power can be distinguished. Before purchasing, it is necessary to examine in detail the machine for the absence of defects and other defects. It is best to start the equipment on site, which will allow you to check how well the engine works. It is important to analyze the condition of the site. The fewer extraneous vibrations you will feel when working, the less rejects you allow when cutting.
When consumers choose a water-cooled electric tile cutter, they most often pay attention to motor power. As in any other electric tool that is powered by a mechanical drive, the engine determines the performance, life, hardness and thickness of the material. The best devices are those that have a power of 800 watts or more, while the number of revolutions should be within 11,000 in one minute.
Reviews on engine location and spare parts availability
An electric water-cooled tile cutter can be characterized by a different arrangement of the motor. According to users, those devices where the motor is located below have less impressive dimensions, but units with a top engine have more options for making accurate cuts. It is also important to consider the possibilities of cutting the material at an angle. Experienced craftsmen indicate that the easier it will be possible to adjust the angle, the more professional the tool is considered. This function indicates an even smaller number of errors when cutting tiles. No matter how high-quality the tool may be, in the process of operation you may be faced with the need to repair it. Therefore, before purchasing the unit, it is necessary to ask experienced builders whether it is easy to purchase spare parts for a particular brand of equipment.
Reviews on cutting characteristics
If you want to buy a water-cooled electric tile cutter, the reviews of which are the most positive, then you need to ask what the possible length and depth of the cut is. If we are talking about electric tools, then the depth of cut, as a rule, is quite impressive, in some cases it reaches 40 millimeters. If you want to choose a good machine, then you should be guided by normal indicators of length, which vary within 0.5 meters. It is important to pay attention also to the characteristics of the abrasive disc. Experienced specialists, as a rule, use an element diameter of 18 centimeters or more.
For reference
Among the additional advantages of electric tile cutters, one can distinguish their functions, which manual models do not differ. This includes cutting at an angle of 45 degrees. This functionality is especially important when working with wall corners. Cutting is obtained with smooth edges and the most accurate. Another advantage is the speed of work, it is for this sake that master tilers acquire electrical equipment, because it will take less than 1 minute to cut one tile.
Features of the electronic system of some models of electric tile cutters
If you want to purchase a Zubr electric water-cooled tile cutter, you should remember that in such equipment there is no system that would be responsible for supporting a certain frequency. Among other things, there is no soft start system. However, you can count on protection against overloads and overheating, which is provided by the presence of a thermal relay.
On sale you can find some models that have an overload indicator, which indicates the need to slow down the flow of the device. Among the units that have such functionality, we can distinguish Eibenstock EDS 181. For more comfortable work, you can choose tile cutters that provide protection against accidental startup. Such electronic diamond devices are equipped with a backup button that locks the start key in the on state.
The Sturm electric water-cooled tile cutter is available for sale with simpler models that have separate buttons, each of which works to turn the device off and on. In such devices there is enhanced protection against moisture penetration into the interior of the machine, which helps protect the master from electrical injuries. For this reason, all tile cutters have protective parts, namely: built-in RCDs, insulation circuits of the windings, as well as casing systems. They do not let water through. Despite the fact that such a powerful protection is available in many units, devices of safety class 1 require the need for grounding.
Mechanics reviews
Electric water-cooled tile cutter “Makita” can have a table of different sizes. The size of the tile that you will cut will depend on the dimensions of the bed. The larger the table, the longer the spindle stroke will be and the more impressive details can be placed under the diamond blade. If you choose the Zubr electric water-cooled tile cutter, reviews of which are presented in the article, you can expand the table space by means of supporting supports or active "ears". According to users, this helps to increase the comfort and functionality of the tool. The master has the opportunity to cut materials of different sizes.
Conclusion
If you decide to choose equipment whose engine is located under the bed, then these devices will have a sufficiently large water tank so that there is no need to replenish the tank often enough.