The light bulb in the refrigerator is not the main element, it can function without it. However, the lack of lighting inside the device adds a lot of inconvenience. To quickly fix the problem, you need to know how to change the light bulb in the Indesit refrigerator? The location of parts in various modifications is approximately identical, the differences are in the location of the ceiling, the features of its mounting and the type of light element.
Types of lighting
Before you figure out how to change the light bulb in the Indesit refrigerator, you should study the types of lighting. They are:
- Conventional incandescent bulbs. Their advantages include only a low price. Such elements quickly burn out, are uneconomical, sensitive to low temperatures, give only a warm light stream.
- "Halogens." They give warm and cold light, due to the inclusion of iodine or bromine in the inner part. They have a longer life for 15,000 hours than vacuum versions with a filament. In addition, such lamps are brighter and more economical.
- LEDs One of the most profitable and practical lighting elements. They hardly heat up, serve for a long time (at least 100 thousand hours), give a luminous flux of any color, and have high efficiency.
- Gas-light models. Such lamps belong to the category of energy-saving devices and have a lot of advantages: long service life, lack of heating, the optimal combination of price / quality parameters. The disadvantages include fragility and the presence of mercury in some varieties.
Breakdown reasons
Did the bulb burn out in the Indesit refrigerator? How to change it and the causes of the malfunction are listed below. First of all, you need to pay attention to the following points:
- check unit wiring;
- inspect the cord for damage;
- make sure that the outlet is working;
- monitor the operation of the refrigerator itself, if it does not start within half an hour - most likely, the problem is in it;
- if previously observed flashing or short-term shutdown of the light element, you need to check the cartridge and contacts.
- in other cases, replace the part.
How to change a light bulb in the Indesit refrigerator?
After making sure that the other parts of the device are working, it is advisable to purchase a similar lighting element. Screw in the lamp is not difficult, but to get to it is not always easy. On some modifications, the cartridge is completely unscrewed, in other versions - partially. There are designs that visually seem fixed.
Instructions on how to change the light bulb in the Indesit refrigerator, class A, are given below:
- First, disconnect the equipment from the power.
- Then unscrew the fixing screw of the lampshade.
- Unbend the part of the body that was fixed with a screw.
- Unscrew the lamp by rotating it counterclockwise.
- Install the new item in the reverse order.
- The removable part of the lampshade is mounted back with fixation using a screw.
Recommendations
If you are interested in how to change the light bulb in the Indesit refrigerator, pay attention to some useful tips. All light elements must be twisted and screwed in very carefully. Shards of glass or other parts that have fallen into the unit do not promise anything good.
It is allowed to take an incandescent lamp by the glass without squeezing or squeezing. Inserting is required by smooth rotational movements, so that the base is correctly in the threaded part of the cartridge.
Halogen elements, despite their similarity to vacuum analogues, are not recommended for touching glass. Natural fat deposits on the fingers shorten the life of the part. The main rule when working with “halogens” is the use of gloves.
Despite all the advantages of gas light bulbs, they have very fragile tubes. When mounting and dismounting the element, hold it by the base.
Sometimes, when replacing incandescent lighting fixtures, glass deforms and spills. Here you need to be careful and not try to collect the fragments with your bare hands. Use pliers or round-nose pliers, with which they hold the edge of the cap, twisting it with rotational movements.
How to change a light bulb in a two-chamber Indesit refrigerator?
Best of all, when repairing and replacing, use parts of the same brand, including lighting equipment for refrigeration units. In specialized service departments, this is not a problem. Even if you have to pay more than in a hardware store, the warranty will cover the possible risks.
If there is no specialized workshop nearby, look for an analogue at the appropriate retail outlets or online. In order not to miscalculate, take the old lamp with you and buy a similar modification. Lighting elements are selected according to two main parameters: the size of the base and the power indicator.
As a rule, sellers will tell you which model to buy if there is a need to change a light bulb in the Indesit refrigerator. Nevertheless, it is better to play safe and take a sample with you. In versions with two cameras, the manufacturer often uses a pair of lighting devices (one in each compartment). Otherwise, the mount and the lighting device of the unit are no different from single-chamber analogues.
How to save?
It is not a problem to change the light bulb in the Indesit refrigerator - “know-frost” or analogs. But, even on these elements you can save. To do this, when buying a unit, follow a few useful rules:
- Choose a device with LED backlight. It will help to avoid frequent element replacement, allowing you to find the right products in your unit.
- High humidity is one of the main causes of burnout of lamps; watch for timely cleaning and defrosting of the refrigerator.
- Use outlets with a grounding system.
- When operating the refrigeration unit, follow the recommendations outlined in the operating and storage instructions.
- Protect equipment from power surges. This can be done using a surge protector or an uninterruptible power supply.
In general, replacing light bulbs in refrigerators is not particularly difficult. To do this, you need to study the instructions for using the unit and have minimal skills for servicing electrical appliances.