In the process of construction work, it happens that you can not do without an electric planer. It sometimes becomes an indispensable tool. With it, you can handle non-planed boards. They are much cheaper, but can not be used in the form in which you purchase them. But the electric plane will cope with this task efficiently and quickly.
In order to choose the best model, you need to familiarize yourself with the technical specifications. Such equipment is different in power. These parameters vary from 450 to 600 watts. In this case, we are talking about amateur models. But if you want to buy a professional device, then you should pay attention to options whose power starts from 850 watts, while the maximum power is 1100 watts.
Preferring a more powerful tool, you can process wood of harder grades as efficiently as possible. Perhaps you should start by choosing an assessment of the features of a particular model. An example is the Interskol R 110 \ 1100M plane, you can read reviews about it below.
Reviews on the main features of the model
You can purchase the above electric planer for 5,000 rubles. It is an equipment for leveling wood surfaces. The width of the workpiece can reach 110 mm. According to consumers, cast parts increase not only the service life, but also the strength of the tool.
Knives are made of high speed steel. According to home masters, it is very convenient to adjust the working depth thanks to the front handle. Its rotation provides a change in the height of the sole. In the front sole there are grooves that make chamfering very easy. This feature is popular with customers.
Technical Specifications Reviews
The plane “Interskol R 110 \ 1100M”, reviews of which should help you make the right choice, has a power of 1100 watts. According to consumers, the lack of a quarter sample sometimes makes them incline their choice towards other models. However, the described embodiment of the device has other positive features, among them we can distinguish, for example, the presence of a soft start.
The design provides for a long cable of 2 m. The plane can be fixed permanently. But there is no speed adjustment in it. According to home masters, the dimensions of this model are very compact and equal to 355x186x172 mm. The number of revolutions per minute reaches 16000. You can plan it to a depth of 3 mm.
The equipment weighs a little, according to consumers, its weight is 4.5 kg. Before purchasing this model, you need to pay attention to the fact that it does not provide the function of maintaining constant speed under load. But you can adjust the depth of planing with ease. Width of processing reaches 110 mm.
Benefit Reviews
The plane “Interskol R 110 \ 1100M”, reviews of which should help you, as well as many consumers, has advantages over other models, they are expressed in the following:
- precisely;
- neatness;
- convenience in work;
- additional guides;
- universality of design.
When buyers choose a planer, they pay attention to such features as the ability to accurately and accurately plan. The described model provides such an opportunity. The front handle is combined with a mechanism for adjusting the depth of planing.
Customers also like the convenience of work. The handle is equipped with a rubber pad and controls. The master will be able to put the tool in his hand and save energy during operation.
Considering the planer "Interskol R 110 \ 1100M", reviews of which are presented in the article, you cannot but pay attention to additional guides. In the front sole there are grooves that simplify chamfering. In addition, the design is versatile. The planer can be conveniently and quickly transformed into a complete planer.
If you still cannot decide whether to choose the described model of equipment, then you should pay attention to additional advantages, among them there are:
- high speed of rotation of a mill;
- random lock;
- effective chip discharge system;
- air cooling;
- the ability to adjust the depth of planing.
This plane, according to consumers, is suitable not only for amateurs, but also for professionals. High quality of the machined surface was achieved due to the impressive speed of rotation of the cutter. You no longer need to worry about where the chips will go, because the manufacturer has provided for the construction of an effective system for this.
Working with a plane is completely safe, because the equipment is equipped with a lock against inadvertent inclusion. Knives are made of special steel, which provides the possibility of multiple grinding. The tool is ready to last a very long time, because its internal components are cooled by the air system.
Planer adjustment
Before starting work, it is necessary to adjust the planer "Interskol R 110 \ 1100M". The tool is placed so that the sole is on top. In this case, it is necessary to analyze whether the knife cutter is correctly set. It should not be skewed. The edge of the cutter should have an elevation. In addition, it is important to ensure that it is parallel to the plantar surface.
The protrusion of the hem above the sole should be measured with a ruler. You can estimate this distance by eye. It should be approximately 0.5 mm. However, greater accuracy in the measurements of the cutting edge can be achieved if you use a device with an indicator.
Methodology
If you want to make error-free installation and fastening of the blade, you must perform disassembly. For this, the Interskol R 110 \ 1100M electric plane, the description of which was presented above, must be held by the block in one hand. With his right hand, strokes with the appropriate devices on the block are performed. It is necessary to act so until the wedge falls out. After it, you need to hammer it and see how the blade is exposed.
It is important to pay attention to the fact that a jammed knife will overrun with a wedge. For this reason, the edge of the blade must be set to a moderate height. You can get rid of distortions by tapping the hammer from the ends. The electric plane "Interskol R 110 \ 1100M" is configured, assembled and disassembled with the participation of screws. There is a groove on the knife that adjusts the edge of the blade in height. A debugged cutter can be fixed with a screw.
More about chip breakers
The chip breaker must be adjusted with a working edge, setting it at a distance of 5 mm from the knife edge. Further fixation is carried out by screwing in the screw. Chip breaking is the main task of the chipbreaker. This saves the operator from such work with the surface being cleaned. If the equipment is equipped with such a channel, then uneven processing of wood will not be scary to you.
Having examined the knives with chip breakers, you will see that they have a gap of 4 mm to the edge of the chip breaker. The minimum value is 1 mm. It all depends on the thickness of the chips and the properties of the wood. Plantar openings can be cleared of blockage independently. This should be done by pushing a thin chip or pulling the chips up. If these methods are not allowed to achieve the desired result, then the equipment can be disassembled.
Recommendations for use
The electric plane "Interskol R 110 \ 1100M", reviews of which are mostly only positive, should be used in the most safe conditions. To do this, the workplace is cleaned, its lighting should be good. If the wood processing area is poorly lit or cluttered, this can cause an accident.
Do not use the machine in explosive atmospheres. This applies to conditions where there are flammable gases, dust and liquids. The machine has an electric drive, so it acts as a source of sparks. They can cause fire of vapors or dust. Email Planer "Interskol R 110 \ 1100M", reviews of which should help you make the right choice, is used to plan boards. They are previously freed from nails. Before work, the sample should be checked for metal objects in it.
What to look for when using
Before starting to turn on the device, it is important to make sure that the knife fixing bolts are securely fastened. The tool must be held in hands as tightly as possible. Use both hands for this. The plane “Interskol R 110 \ 1100M”, the characteristics of which were presented above, has sharp cutting parts. Touch them on the go should not. Extraneous sounds and vibrations indicate improper fastening and / or poor balancing of the knives.
Before turning on the unit, make sure that it is not in contact with the surface of the sample. Children should not be allowed into the plane when the device is on. Otherwise, there may be a risk of a reverse impact when the tool is jammed in the part.
Conclusion
The plane “Interskol R 110 \ 1100M”, the instruction manual of which was partially presented above and is supplied in the kit, has a small weight. But if you still can not make a choice, it is important to pay special attention to the weight of the device. Foreign analogues are lighter than those made in the countries of the former CIS. In the former, the weight is about 2.6 kg. But the mass of a Makita plane varies depending on the model and can be a minimum of 2.9 kg or a maximum of 27 kg.