During the construction of the bath, there comes a time when it is necessary to determine its internal decoration. It is very important to choose a material that will not only be beautiful and functional, but also be able to withstand the specific microclimate of this room. Based on this, many are wondering how to cheaply sheathe the bath inside and what qualities should the selected material have? A properly equipped steam room is the key to a comfortable and pleasant stay, which is why you need to approach the decoration of all its surfaces as responsibly as possible. In this article we will consider in detail the process of improvement of this room, starting from the choice of materials and ending with the technology of their installation.
Choosing the Right Material
To the question than cheaply sheathe a bath inside, there is one right answer - a tree. Why to them? Because it is the only 100% natural material that meets all the requirements for operation in rooms with high humidity and high temperature. This finish gives the space a special aesthetic, creates a pleasant atmosphere, and most importantly, it retains heat perfectly.
For those who are interested in what it is possible to sheathe a bath inside except for wood, mention should be made of glass-magnesium sheets. This is a new material, which is made from wood chips and fiberglass with the addition of various binders.
Plates are available in bright colors and can be used in rooms with high humidity. Since this is a relatively new product, it is rarely used for facing the bath, so we will not dwell on it for a long time.
Of the wooden materials actively used: block house, panels and lining. For a bath, these options are considered the most suitable.
What kind of wood should I choose for a bath?
Engaged in wall and ceiling decoration, it is not at all necessary to limit yourself to any one type of wood. The combination of various varieties that differ in shade will allow you to make a more interesting and extraordinary design. But, before deciding which tree to sheathe the bath inside, one should take into account the properties and operational characteristics of each tree species.
Facing the ceiling and walls, it is better to use larch, linden, aspen and cedar. Materials from pine are extremely undesirable to place in the steam room, since when heated they emit a pungent smell in the air, which can interfere with a comfortable rest.
But for the decoration of dressing rooms and lounges, this option is optimal. Pine has a beautiful texture, easy to process and has a very attractive cost.
It is better to sheathe the steam room and the washing room with linden and larch.
These tree species are able to maintain their original color for a long time and practically do not heat up under the influence of high temperature.
Steam room decoration
To finish the surfaces of the steam room, only high-quality materials should be selected. Most often, lining is used here. For the bath, a board of the highest class of solid wood is chosen .
Lamels are located in a horizontal or vertical position and are fastened with nails, markers or staples in a secret manner. In order to ensure reliable retention of heat and steam inside the room, a layer of thermal insulation material is placed on the walls.
For this purpose can be used:
- foil;
- mineral wool;
- foamed polystyrene;
- glassine and others
It is very important that there is air space between the lining and the heater. This can be achieved by installing the crate on which the facing material will be installed. The distance between the rails should not be more than 50 cm.
The finished frame and lining is covered with an antiseptic. Processing is carried out before assembly begins. The wall cladding begins from any corner of the room, fixing the boards on both sides, with any of the above fixing material.
Facing floors: wood or ceramic?
The temperature in the steam room at the floor level usually does not exceed the mark of 30 degrees, so they can be made of any material. Here it is more important to make the correct and quick discharge of water from the bath. The subfloor is covered with a plank flooring, on which a polished floorboard or ceramic tile is laid.
Comparing these two coatings, it should be noted that the tile is more durable. This is due to the fact that under the influence of moisture the wood darkens, decays and after some time fails. Ceramics, in turn, are not afraid of humidity, temperature changes and are not subject to rot and mold.
Despite this, very often wooden floors are laid in the baths. This material is in perfect harmony with the surrounding interior and is much nicer when touching bare feet.
Considering how to cheaply sheathe a bath inside, it is worthwhile to dwell in detail on the installation technology of both options.
Wood flooring
The process of finishing the floor with wooden materials is very simple. First of all, the logs are laid on which the boards are mounted. They are placed on columns of brick, which are installed on the base of the floor. For logs, boards with a size of 20 x 20 or 25 x 25 are chosen. They are stacked in increments of not more than 1 meter. The floor level in the steam room must be 10-15 centimeters higher than in other rooms of the bath. This is necessary so that warm air does not come out of the steam room as long as possible. For laying the final floor, sheet pile or edged material is used, at least 30 cm thick.
Before sheathe the bath inside the board, the entire lining and logs must be pre-treated with an antiseptic composition. This will protect them from colonization by microorganisms and extend the life of the wooden floor.
Ceramic flooring
For safe movement for floors, choose a tile with a rough surface. This will make them less slippery when in contact with water.
To lay the ceramic coating, you need to make a solid concrete base. The surface should be perfectly clean, even and dry. Immediately before laying, the tile is soaked in water for a couple of minutes. This is necessary so that it does not absorb moisture from the solution and the floor lining turns out to be of the highest quality and strong.
From the most noticeable corner of the room, they begin laying tiles using sand-cement mortar or moisture-resistant glue. At the end of the work, the seams are hidden with a special moisture-resistant grout. It helps protect the tiles from mold.
For more comfortable movement on the tiles, flooring can be placed on the floor, knocked down from wooden slats. Such designs are convenient in that they can be taken out of the steam room to dry.
Cost
To properly plan your own budget, you need to understand how much it costs to sheathe a bath inside. The total amount depends on who will perform the finishing work and how high-quality material is chosen for decoration.
If it is planned to hire specialists to equip the bathhouse, you need to be prepared to pay for their services. So, the installation of battens is estimated at 130 rubles per m 2 . Lining the walls and ceiling with clapboard will cost the landlord from 350-500 rubles per m 2 .
In the event that the walls inside the bath will be sheathed with their own hands, only expenses for the purchase of lining and related materials are taken into account.
A board of the highest quality made of linden costs about 500-600 rubles per m2.
Lining from larch will cost 250-350 rubles per m 2 , while material made from coniferous wood has a price tag of 150-200 rubles m 2 .
To these costs should be added the cost of fasteners, bars and thermal insulation.
Conclusion
In this article, we found out how and how to cheaply sheathe a bath inside. In order to save money, the internal arrangement of the premises can be performed independently, without resorting to the expensive help of specialists. After facing floors, walls and ceilings, care must be taken about lighting and installing furniture. A variety of shelves and hooks, on which you can fold personal items and hang towels, will not be superfluous. After completing all the work, you can start bathing procedures and enjoy your vacation with friends and relatives.