Lining is called a thin narrow board, equipped with a special lock, usually working on the principle of a spike groove. The main advantages of this material are: ease of installation, environmental friendliness and aesthetic appearance. Initially, passenger carriages were lined with such boards. Hence the name of this material. Lining can be used for facing buildings of various purposes. Very often this material is used, for example, for sheathing baths from the inside. In this case, it is very important to choose the right kind of board. Further in the article, we will figure out which lining for the bath is better and how not to make a mistake when buying this material.
What are the characteristics of a board?
When choosing a lining first of all pay attention to the following factors:
In any case, to the material intended for facing the bath, since it will subsequently be constantly exposed to moisture combined with elevated temperatures, special requirements are made.
Cedar and pine
Coniferous boards for cladding steam rooms inside are extremely rare. The best answer to the question of which lining for a bath is better would be: hardwood. The fact is that the coniferous board contains just a huge amount of pitches. Therefore, when heated, difficult to remove “tears” appear on its surface. In addition, such a material begins to emit a very strong smell. However, despite all this, some conifers for cladding steam rooms can still be used. These include, for example:
Canadian or Altai cedar. This wood for baths is allowed to be used primarily because it contains very few resins. Even with strong heating, these viscous substances do not have a special effect on the microclimate in the steam room.
Pine tree. This kind of wood is allowed to be used only in steam rooms with electric stoves. The fact is that such equipment does not warm the air in the room too much. Such a temperature at which pine resin begins to melt in baths of this type never happens. The wood of this breed is not heated at elevated temperatures. At the same time, it looks pretty pretty. When using a pine wood or gas stove, only dressing rooms are allowed to be trimmed.
Alder, linden, aspen: which is better?
Hardwood lining for a bath is better than coniferous. In principle, almost any such board is suitable for covering the steam room. You can even use, for example, inexpensive birch for this purpose. However, if you are interested in the answer to the question of which lining for a bath is better from hardwood, then these are:
A board made of such wood is simply remarkable for its performance characteristics, it looks beautiful and lasts a very long time. These types of material cost more than birch, but the bath with their use is much more comfortable and convenient for people who take water procedures.
As you can see, there is a different lining for the bath. Which is better? The prices, for example, for alder boards at most suppliers are not too high. This is a very good option. Moreover, such a board is not at all afraid of prolonged exposure to moisture and practically does not heat up in the steam room. However, at elevated temperatures, the alder begins to emit a slightly bitter smell into the air (in principle, not too unpleasant).
Linden lining is more expensive than alder, but it can also last much longer. In addition to good resistance to moisture, such a board also has the advantage that it is never damaged by wood bugs. It is impossible to get burned on such boards during the adoption of water procedures, since they do not heat up. It is believed that it is the linden lining for facing the baths that is best suited.
Aspen, like alder, can release a bitter characteristic smell into the air. Such boards usually last a very long time. But only if during operation they will not be damaged in any way. Around any scratch or chip on the aspen board, a rotten area can fairly quickly form.
Which lining is better to sheathe a bath: an African novelty
Recently, many wealthy bath owners prefer to trim the steam rooms with an abash wood board. This material looks great on the walls and ceiling. Abash tree grows in Africa. Its main advantage is the ability to stay pleasantly warm even at very high temperatures in the steam room. The lining of the abash does not heat up, including in places located in the immediate vicinity of the heater. The color board of this variety has a nice beige.
Which lining is best for a bath: a comparative overview of the material by class
The lining produced by modern industry, among other things, can vary by class. According to this criterion, there are mainly three classes of boards on the market: A, B and C. For steam rooms, only a lining marked with the letter A is usually purchased. Such material, according to standards, has practically no damage and contains a very small number of knots. In extreme cases, you can purchase a lower-quality cheap lining B. For the steam room. The material marked with the letter C is completely unsuitable for wet rooms.
Very often for baths a lining of the "Elite" or "Premium" class is also used. Such material looks very solid and neat and lasts a long time. However, the board of this variety is quite expensive.
Comparison of domestic material and imported
Next, let's figure out which lining is better to use for a bath - domestic production or imported. On the Russian market today there is a board of both types. At the same time, the most popular among the owners of baths in our country is the domestic lining. The quality of Russian material is quite worthy. It costs much cheaper than imported.
Eurolining for a covering of baths, of course, can also be used. Imported material differs from domestic one mainly in more exact compliance with standards. All boards of foreign manufacture are distinguished by carefully calibrated sizes. Domestic lining in some cases may have a slightly inappropriate width declared by the manufacturer. In addition, foreign-made boards are distinguished by a deeper lock groove.
The choice of appearance
When deciding which bath lining is better, among other things, you should pay attention to how this material looks. Previously, only one type of skin of this type was sold in construction supermarkets - a flat board. Today, if you want to finish the bath, you can also buy a special lining - a block house. This is the name of the board, in appearance resembling a very even narrow croaker. Mounted on the wall, such material is unusually realistic imitates a log.
In addition to the usual material and block house, in our time there is an American board on sale. This option is also a good answer to the question of which lining is better to sheathe the bath from the inside. A board of this kind on the wall imitates a beam. American lining looks very beautiful. However, it should be used only for facing baths of a very large area. The fact is that this material has a significant thickness.
Lining processing
Such a board arrives on the market completely ready for installation. However, since the microclimate for wood in the bath is not very favorable, it is advisable to process the lining before installation . Most often an inexpensive drying oil is used that does not emit harmful substances into the air for this purpose. However, unfortunately, this finish is not too durable. Therefore, deciding which means is better to process the lining in the bath, many owners of suburban areas choose special oil. This material also does not emit harmful substances into the air and lasts much longer for drying oil. But at the same time oil costs, of course, a little more expensive.
Lining cost
Of course, one of the main factors that affects the choice of board variety is price. The cost of lining depends primarily on its thickness and width, as well as the wood species and quality class. For example, the price of a linden board 14 x 96 x 1000 mm "Extra" is about 550 rubles. Alder lining of grade A 14 x 80 x 2700 mm costs about 250-270 rubles. For aspen material 12.5 x 42 x 500 mm class B will have to pay 100-120 rubles. Euro cedar lining of Extra grade 14 x 85 x 2500 mm costs about 1,500 rubles. The price of a block house abash 16 x 85 x 3000 mm is about 1200-1300 rubles. Prices are per square meter of material.
Reviews on the lining as a bath casing
Thus, we have found out what happens with such material as a lining for a bath. Which is better (there are only good reviews of all the varieties of such casing considered above) the board is suitable for facing the steam room, the owner of the suburban area should decide, depending on his preferences and capabilities.
The most popular type of material is, of course, hardwood board. The choice of cedar for lining, many owners of the baths also quite approve. But since coniferous wood is still heated stronger than deciduous, the wall behind the canopy in this case, reviews are advised to veneer alder or aspen.
Most visitors to specialized forums consider abach for a bath to be simply perfect material. However, most owners of suburban areas still call it too expensive. Therefore, it is usually advised to use it only for the manufacture of canopy and benches.
Lipa from the owners of cottages has earned extremely positive reviews. This material is not only not heated, but also smells very nice. As a result, the steam room creates an absolutely unique, namely the traditional "bath" atmosphere.