Currently, the stucco facade can be attributed to the average price category among the methods of external cladding. This finish is much more often chosen by the owners of panel-frame houses. The structure after work looks solid and very aesthetically pleasing, while there are no restrictions in terms of color. In addition, the use of such a system allows for additional insulation. However, first you will have to buy materials for plaster facades, which are not fixed on rigid structures, but on insulation. Thus, it is necessary that the product for thermal insulation does not deform and does not slide down.
Performing a
plaster facade with additional thermal insulation, you will have to use a special insulation, whose tensile strength exceeds 15 kPa. The most commonly used polystyrene foam or
rock wool. These products also have a low coefficient of thermal conductivity, acting as an effective material. The application of adhesive to heat-insulating boards can be done in two ways. In the first case, the solution is evenly distributed over the entire area of the insulation. This is true with perfectly even walls. Well, with another option, glue is applied at the edges of the plate and dots in the center.
When similar facades are made, photos of which please with their beauty, the decorative coating also acts as a reinforcing layer. Its task is to form a rigid surface and close the
insulating material. It includes a special fiberglass mesh and the plaster itself. As for the first component, it has a high resistance to alkali. Due to this, it does not dissolve upon contact with the finishing material itself.
The advantages that the stucco facade has are quite obvious. Thermal insulation of the walls is carried out with minimal cash and labor costs. Lightweight and effective insulation makes it possible to abandon the construction of bulky brick structures. Therefore, the load on the base is significantly reduced, and the internal space is increased. Inside the house, due to the constant temperature, a comfortable microclimate is maintained, despite the weather conditions outside. When combining a vapor-permeable finish with stone wool, excess moisture is naturally removed without additional ventilation.
Any plaster facade is made using products modified with polymer additives. It is from them that the basic characteristics of the cladding will depend. It is recommended to buy all materials for the installation of such a facade from one supplier, since the components should be similar in physical and chemical properties. The vapor permeability can only decrease with advancing into the inside. The finish has a large number of color options. In the main palette are almost two hundred tones.