Installation of slate or stone fence between adjacent summer cottages is prohibited. This is because deaf high fences obscure the space. If we take into account the size of the territory of 6 acres, where each meter counts, then all plants planted along the described structure will wither away. Complaints from neighbors are inevitable. An excellent option may be to install a fence made of mesh netting. Such a structure is popular among summer residents and is used to enclose technical zones, lakes and sports grounds.
Fence Device Options
If you are thinking about how to make a fence from a mesh netting, you should know that today there are two most common ways to do this. The first technology is to pull the material between the posts. The second method is expressed in the manufacture of sections from the corners into which fragments of the mesh are fixed.
The first approach is cheaper and easier, but less aesthetic. For the manufacture of sections you will require considerable expenses for the corner, and its cost may exceed the price of the grid. The sectional fence is more durable and aesthetic, you can dry it or just hang it on it. For these methods, you will need supports between which the grid will be fixed.
Which pillars to use: description of wooden supports
Fence posts can be made of different materials, such as wood. It is light and affordable, but short-lived. Wooden beams or poles are purchased only when they are cheaper than metal. Quite often, such supports are installed in the case of installing a temporary fence. There are also situations when wooden building materials remain after the construction of the house.
If you do not want to face unnecessary costs and ownerless material, it is better to choose wooden poles. For their device you will need bars that are cleaned of bark. Then the elements are trimmed to the desired length. Deepening is carried out 15 cm below the freezing line of the soil. The length of the beam will be approximately 3 m.
The underground part must be treated with waterproofing mastic. Today, mastics are offered in a wide variety, many of them do not require heating or preparation. The rest of the bars must be painted, otherwise the material will rot in six months. The mesh is fastened with nails. Clamps can be distinguished from modern materials, but they do not fit too organically into the general appearance of the structure.
When to choose metal supports
Pillars for the fence can be made of metal. This material is more preferred, reliable and durable. If you decide to use this technology, then you can pick up pipes of square or round cross-section. To reduce the cost of construction, pipes are purchased in the purchase of scrap metal. Sometimes there is an opportunity to pick up a good version of products that have lost their tightness, but were not affected by rust.
On sale there are poles that are ready for use for the construction of the fence. Such products are painted and complemented by hooks. Pipes in this case are more expensive, but you free yourself from the attendant worries. Alternative solutions are products made of asbestos cement and concrete. To them, you can fix the grid with clamps or a cable, weaving the latter into the grid and fixing it on a pole.
Tension fence
Having decided to use a galvanized wire netting for the fence, you must choose the technology of the work. If it will provide for the tension of the material, then you can take as a basis metal poles. The width of the grid is 2 m. First you will need to mark the territory. Pegs are installed in the corners of the plot, between which a cord or a construction rope is pulled. The length of the latter must be measured, this will determine the length of the grid, which you will need to purchase with a margin of 1 m.
The next step will be the work in the process of which you will need to mark the places for the installation of poles. The optimal distance between them is 2 m. This step should not be increased, since the netting is a bending material. In order to calculate the number of columns, the length of each side of the plot must be divided by 2.
The installation of the fence from the mesh of the netting in the next step provides for the designation of marks along a stretched line with the above step. It is important to ensure that the marks are on a straight line. If the site has a slope, then to build a fence will not work, since the mesh is poorly fastened in an inclined position. The only way out will be the terracing of the territory. In the place where there is a height difference, a long and powerful pillar is installed, to which sections of the grid are fixed. For this, the canvas is divided.
Pillar Installation
Making a fence from a netting net with your own hands, then you can proceed with the installation of poles. In the marked places, it is necessary to make wells with a shovel or drill. It is necessary to deepen by about 1.5 m. In order to prevent the posts from moving during soil expansion, they are buried below freezing by 20 cm.
The first are the angular supports, as they will have the greatest pressure. Crushed stone is poured to the bottom of the well and compacted well, then there is a layer of sand, which also needs to be compacted. A pipe is mounted next, the underground part of which is treated with anti-corrosion mastic. Now you can grout the cement mortar using a piece of sand and two parts of cement. After the dry components are combined, two parts of crushed stone are added to them, and after that the mass is mixed and filled with water.
The composition mixes well, but the solution should not be too liquid. It is poured into a hole around the pipe. It is necessary to control the vertical position of the posts using a plumb line. Concrete should be pierced with a shovel to compact it.
The second is a corner post on the opposite side. All other supports are located on a stretched thread. You can continue further work only after the concrete has hardened, which will happen in about a week. Sometimes metal supports are not concreted, but are covered with a layer of rubble stone, which is well compacted, after that a layer of soil is placed in the pit, and rubble stone comes again from above.
Mesh pull
If you decide to make a fence from the netting net with your own hands, then at the next stage you can proceed to pulling the material. Hooks are welded onto the posts for this, on which the grid will be fixed. You can use screws, nails, pieces of wire, thick wire or other material at hand. Before pulling, it is necessary to straighten the roll and install it near the first pillar. The grid is hung on hooks, and for greater strength, the first row of cells is complemented by thick wire. After it is possible to hang the grid, the rod is welded to the pipe, this will eliminate sagging material.
Installation of the fence from the netting net provides for unwinding of the material on one span. Having departed from the connection of the grid with the column, it is necessary to pass the rod into the cells in an upright position. So you can pull the net. Otherwise, the material cannot be distributed evenly.
Final work
If you are faced with the question of how to make a fence from a mesh netting, then you must thread a wire or rod in a horizontal plane. To do this, it is necessary to retreat about 20 cm from the top edge. These elements are welded to the column and will serve as a supporting support. This procedure is repeated for all other posts.
Sectional Fence Production
The device of a sectional fence from a mesh netting differs from the above construction by the presence of a section frame. At the first stage, it is necessary to mark and install the poles, which should be more durable, since they will undergo a large load. For this, a corner is used. The frame is welded from it.
Quite often, summer residents are wondering about how to make a fence from a mesh netting. If you, too, are among them, then the next step is to unwind the roll. If necessary, the material is reduced in height, excess can be cut off by a grinder. A bar is threaded into the extreme row, which is welded to the vertical rack of the frame. Then the rods are threaded into the upper and lower rows. The result should be a section that is welded from the corners.
Metal strips are welded to the posts. They will be horizontal. The section should be between the posts, it is welded to the strips. Before you make a fence from a mesh netting, you must prepare the paint. It is applied to the primer. On this we can assume that the fence is ready.
Finally
A fence from a netting net without welding will work if you act according to the first of the technologies described above. However, in this case, you need to abandon the rods that are installed horizontally. This approach is relevant when the distance between the supports is not too large.
In order to calculate the approximate cost of the fence, you need to inquire about the price of a galvanized netting net. The cost will depend on several factors, such as cell size. If its side is 10 mm, then for the roll you will have to pay 1,800 rubles. For a square meter, you will give 188 rubles. As the cell size increases to 15 x 15 mm, the cost decreases to 1,200 rubles per roll.