C10 professional flooring is one of the widely used products in civil and industrial construction. The most often galvanized profile is used in the construction of individual residential buildings. The material gained high popularity not only because of its low cost in comparison with analogues, but also due to the successful combination of lightness and strength, as well as ease of installation. This allows you to save not only at the time of purchase, but also in the process of construction work.
Application area
One of the reasons for the high popularity that C10 decking has is its versatility. The material is used in almost all areas of construction: in the arrangement of roofing, the construction of prefabricated buildings and structures, frame, insulated wall and panel structures, fences, fences, ceilings, as well as prefabricated sandwich panels.
If it is necessary to lay C10 as a roofing, you should initially equip the crate, while the step between the elements will be 0.5 meters (but not more than 0.8). This indicator is relevant for roofs with a large angle of inclination. C10 corrugated board is manufactured according to state standards P 52246-2004 with the use of cold rolled steel, which is protected by a hot zinc coating. The most popular was C10 with a polymer coating. A decorative protective layer makes the material attractive externally and extends the life of the profiled sheet. On sale you can find professional flooring brand C10 with a single-sided coating, where a special varnish is applied to the inside. A sheet with double-sided spraying is used for the construction of fences, which allows to ensure the same aesthetics of the fence on both sides. In stores, C10 professional flooring from some manufacturers is sold, which has a curly texture and is intended for the construction of residential house fences.
Specifications
If you want to choose the right material, then you should pay attention to the numbers that are indicated next to the marking. As an example, you can use the designation C10-1000-0.6, from which you will find out that in front of you is a wall sheet with a trapezoid height of 10 mm. The useful web width is 1,100 mm and the metal thickness is equivalent to 0.6 mm. The modern consumer is invited to purchase material marked C10-1000-0.5 and professional sheet C10-1000-0.7. The first of these has a sheet thickness of 0.5 mm, while the thickness of the second is 0.7 mm. One square meter of profiled sheet of smaller thickness weighs 4.6 kg, but the 0.7 mm sheet will weigh 6.33 kg.
Despite the fact that the difference in thickness between these varieties of material is insignificant (the second weighs 1.73 kg more compared to the first), it increases the load on the system, which is especially true for large sizes of roofing. Therefore, when purchasing C10 corrugated board, it is necessary to calculate the area of the roof, which will be affected by the snow load, typical for a particular region. The dimensions of the sheet differ in the width of the initial blank. This parameter can be 1,000, 1,100 or 1,250 mm. There is also a useful width, which is 900, 1,000 and 1,100 mm.
Material weight depending on thickness
C10 decking, whose weight varies depending on the thickness, has a steel density of 7,800 kg per cubic meter.
- One running meter of the product will weigh 4.45 kg if the sheet thickness is 0.4 mm. In this case, 4 kg will fall per square meter.
- With an increase in thickness to 0.45 mm, the weight will be 4.05 kg per m 2 and 4.78 kg per p / m.
- A sheet thickness of 0.5 mm gives a weight equivalent to 4.6 kg per m 2 and 5.4 kg per linear meter.
- The product of 0.55 mm has the following indicators: m 2 - 5.4 kg, and s / m weighs 5.9 kg.
- With a slight increase in thickness to 0.6 mm, a running meter of the product will weigh 6.4 kg, and a square meter will weigh 5.383 kg.
- A 0.7 mm sheet has a weight of 6.33 kg per square meter and a weight of p / m is 7.4 kg.
Extra features
The profiled metal sheet has a certain rigidity and strength, which was achieved thanks to a deep 10 mm corrugation. This allows you to use the canvas for structures and structures of high complexity. The material is resistant to corrosion, and the polymer coating increases the durability of operation. The sheet profile is economical as well as resistant to any climate. Without coating, it can be used for the manufacture of formwork in order to fill the foundation with concrete. By purchasing C10 professional flooring, the technical characteristics of which motivate consumers to make a choice in his direction, you get the opportunity to reuse the canvas, saving money. The material is easy to install, it is easy to cut and drill, which facilitates the work of installation teams.
Cost
C10 corrugated board, the price of which will vary depending on the thickness, comes with galvanized and polymer coating.
- In the first case, the product of the smallest thickness (4 mm) will cost 196 rubles. per linear meter.
- With an increase in thickness to 0.5 mm, the price rises to 229 rubles. for s / m.
- If you are interested in the thickness of 0.55 and 0.7 mm, then for the running meter of these materials you will have to pay 249 and 307 rubles. respectively.
- The price will increase if the corrugated sheet has a polymer coating. This material is presented for sale in several versions - 0.4 mm thick, as well as 0.5 and 0.7 mm. In the first case, the cost is 228 rubles. for s / m. A sheet of 0.5 mm thickness will have to pay 268 rubles. And for a running meter of a seven-millimeter corrugated board - 368 rubles.
Features of the use of corrugated board
Corrugated iron can be laid on almost any roof. The distance between the rafters should be equal to the limit of 600 to 900 mm. Between themselves, the sheets are fixed with roofing rivets, and for laying on the roof, roofing screws should be prepared. Holes are pre-made for them. If it was not possible to find construction accessories of a suitable shade on sale, then self-tapping screws can be replaced with hexagonal screws. You should choose fasteners with a plastic or rubber washer. If you decide to use the latter option, then first, in the place of installation of the fasteners, it is necessary to drill holes whose diameter should be 0.5 mm larger than the screw. Corrugated iron should not be installed on the roof with nails. This is not provided by technology for the reason that under the influence of wind, nails will not be able to hold the sheet. Self-tapping screws and screws should be installed strictly vertically, which eliminates leakage of water.
Sheet reinforcement specialist advice
Sheets of corrugated board are installed on the crate and are fixed in places where the wave fits. About 8 fasteners will be needed per square meter. Try to keep the distance between them the same. To the first and final crate, the sheets are attached to the area of each wave, since these areas will have a large wind load. To the intermediate crates, the corrugated board is fixed through the link. At longitudinal joints, the step between the fastener elements should not be more than 500 mm.
Important Nuances
The corrugated sheet can be stacked according to one of two existing methods. The first provides for the vertical location of the canvas, while the second - the creation of a block of three sheets. Vertical laying is used for products with a drainage groove. First, the 1st sheet is laid, which is fixed temporarily, after which the first sheet of the 2nd row is located. Next comes the second canvas of the 1st row. Next, install the 2nd sheet of the second row. This will allow you to get a block of 4 paintings, each of which should be aligned and fixed finally.
If you want to fasten the sheet to the wall, then for this it is worth using a metal guide profile. First, vertical profiles are installed, which must be fixed to pre-mounted brackets, then horizontal bridges should be attached between them. Their location should be convenient. By the time the frame structure is ready, you can begin attaching the wall corrugated board, by using self-tapping screws.