Over time, the surface of the wooden floor wears out and requires restoration. Properly performed scraping of the old surface will significantly improve the appearance of the worn coating. The process of scraping is to remove from the worn surface of the old layer of varnish or mastic, as well as the resulting bumps and burrs. Since making a wooden floor in a wooden house smoother is quite difficult, you will have to resort to using a tool such as a clipper.
First you need to familiarize yourself with some of the features of this work. You need to find out if this method is suitable for your long-suffering gender. Carefully inspect it and evaluate the strength of the old boards. If they hang out, and there are wide gaps between them, then it will be useless to carry out scrapping with a machine. In this case, the old floor will have to be removed and re-laid on the logs. If you are thinking about how to make a wooden floor in a wooden house a little smoother, then you should keep in mind the fact that in the boards in no case should there be nails that can disable your tool.
If the floor is tight and does not play, then you can safely use a clipper. They come in various designs - surface grinding, drum and belt - depending on what, the principle of operation of each of them will be different. In addition to the machine, consumables and repair materials will be required - an emery cloth, varnish and putty paste. If the costs for them seem too big to you, then think about the fact that the new floor in a wooden house can certainly not be made quickly, and it will cost much more.
Cling preparation
If the skirting boards are thoroughly nailed, then they can be left in place. But we advise you not to spare time and completely dismantle them: since we plan to make the wooden floor in a wooden house smoother with the help of a power tool, you should not risk it and leave unnecessary opportunities for its damage. It is necessary to check the surface of the floor not only for the presence of nails and screws, but also to heave the protruding hard knots and petrified layers of paint. When the machine is in operation, they can damage the belt of the grinding tool.
Hopping stages
- Using rough grinding remove the old coating from the floor. In this case, it is better to use a special surface grinding tool.
- The second grinding is carried out by a disk surface grinding tool. They remove traces of rough processing.
- The third stage - bringing the surface - is performed by an angle grinder. She "practiced" hard-to-reach places.
Gaps and other defects remaining after grinding work must be putty. So the floor in a wooden house (with your own hands to polish it, by the way, is quite simple) will become even more beautiful.
Putty
The cracks are sealed with putty paste, which can be mixed with clean dust left from grinding. A thoroughly mixed paste is applied with a spatula, evenly distributing it over all areas with defects. After final drying of the repaired areas, they need to be sanded again to obtain a perfectly even and smooth surface. Then you need to thoroughly clean the floor from small debris and dust. After cleaning, proceed to applying special varnish or paint, after which we dry the coating for at least two days.
We hope that the article material was useful to you, and you learned how to make a wooden floor in a wooden house not only smoother, but also much more attractive!