Masonry mortars have been used in construction for a very long time, but their colored variety is an innovative development and has already managed to find its popularity. If you want to give the house a unique flavor, you should more carefully approach the choice of mortar for masonry, which can have a wide range of shades and colors. Thanks to the use of such a solution, the finish will stand out against the background of other materials, because not a single seam will be visible. That is why such compositions, despite their higher cost compared to the standard analogue, continue to gain popularity. In addition, you can cook them yourself, which reduces the cost of the repair process and allows you to get interesting solutions.
The main varieties of masonry color solutions
Colored masonry mortar is a fine-grained mixture, which is prepared using various clearly dosed ingredients. These mixtures consist of a certain amount of water, inorganic substances, as well as fine-grained aggregate. Areas of use are repair, exterior and interior decoration, as well as brick and masonry. Based on what binders will be in the composition, it is possible to subdivide color solutions into:
- air;
- waterproofing;
- masonry;
- acoustic.
The air solution is made from fine aggregate and a binder air mixture. The waterproofing solution is made with the addition of "Ceresite", aluminum sodium and iron chloride. Masonry compounds are made of clay, lime or cement, as well as water. As for acoustic solutions, they include astringent fine particles, gypsum, cement and lime.
Colored masonry mortar is obtained by adding to the main ingredients a mineral dye based on iron oxides. The content of this dye can vary from 1 to 8%. If this figure is exceeded, then the technology can be considered violated. Such a mixture is used for the construction of external and internal walls using clinker cladding bricks, as well as for paving paving slabs and pavers, decorating stone and chimneys, as well as facing fireplaces and plastering building surfaces.
Key Benefit Reviews
Colored masonry mortar has many advantages. According to buyers, it is convenient to use it, because the composition dries out in just a few hours, there are no efflorescences on the surface after water evaporation, the color is saturated, but consumers can choose a shade at their discretion. Buyers also like the low cost.
Review of color masonry mortars of the brand "Weber.Vetonit"
If you need colored masonry mortar, then you may prefer Weber.Vetonit, which is used for laying silicate and ceramic bricks, when there is a need to ensure that the shade of the joints matches the color of the brickwork. Among the main varieties of these solutions, Weber.Vetonit ML 5, which is a solution for laying ceramic and silicate bricks, should be highlighted. Whereas Weber.Vetonit ML 5 P is a mortar for bricklaying in winter conditions, when the ambient temperature varies from +5 to -15 ° .
Choosing Weber.Vetonit ML 5 T, you will work with a solution that is designed for use in places with intense rainfall. These include the shores of lakes and seas. Among the main qualitative characteristics of this composition is low water absorption. Colored masonry mortar for bricks is also available in the form of Weber.Vetonit ML 7.5. This is a solution for masonry products with low water absorption. Provides a composition of increased adhesion with a brick.
Quick-mix RSS solution specifications
Quick-mix color masonry mortar is available in the variety mentioned in the subheading above. This mineral composition has water-repellent properties, good adhesion to side surfaces, as well as resistance to external negative factors. The compressive strength exceeds 10 MPa, while the temperature of use varies from +5 to +30 ° C. The size of the aggregate varies from 0 to 0.63 mm.
It is necessary to use the composition after preparation within half an hour, while the width of the seams can vary from 4 to 15 mm. When preparing a solution for 25 kg of dry mix, about 4 liters of water should go, its final volume will depend on the method of applying the composition.
Characteristics of the Masonry mortar
If you are interested in the masonry mortar "Founded" color, then you should familiarize yourself with its characteristics, among them it is worth highlighting:
- frost resistance;
- strength and uniformity of the seam;
- a possibility of use for external and internal works;
- lack of efflorescence;
- designation for facing bricks.
On sale you can find more than 19 colors. Brand compressive strength may be equal to or greater than 15 MPa, you may also be interested in the adhesion to the surface, which is 0.3 MPa or may be more. The water holding capacity is 96%, but about 1 liter of dry water will take about 0.1 l of water.
Characteristics of the Perfect Linker Standard solution
Color masonry mortar "Perfekta Linker standard" is also popular among consumers. Its cost is 212 rubles. per 25 kg bag. The compressive strength is 15 MPa, while the adhesion strength is 0.3 MPa. About 2 kg of the composition will take per square meter of surface, which is true if the width of the joints is 1 mm. The thickness of the layer should vary from 5 to 15 mm.
It is noteworthy that this solution can be operated at a wide temperature range, which varies from -50 to +70 ° C. The mixture remains viable after cooking for another 120 minutes. The amount of water should vary from 3 to 3.5 liters. It is necessary to apply the solution when the thermometer column is kept in the range from +5 to +30 ° .
Conclusion
Vetonit is a colored masonry mortar that you can choose among all the others. But before purchasing a product, you need to familiarize yourself with the characteristics in more detail. In principle, each of the above compositions is intended not only to achieve a decorative effect, but also to create strength. On sale today you can find a facing brick in a wide assortment, its colors are diverse, which means that a colored solution is required for its laying.