Today on sale you can find air conditioning systems and heating systems in a large assortment, they allow you to adjust the conditions of the indoor environment of the premises and maintain a comfortable microclimate. Most of them are effective only on a small area, at home. They are characterized by high levels of energy or fuel consumption. Especially for such cases, industrial heating systems have been developed, among them water fan heaters can be distinguished.
Such heating systems are characterized by low efficiency in terms of the time required for heating the premises. The best option for workrooms and residential buildings are water heaters that combine the basic principles of an air-to-water heating system.
Polaris PCDH 1715 Fan Heater Feature Overview
For this model you will have to pay 1100 rubles. A device based on a ceramic heating element works, during operation, the user can use the unit so that it functions in one of three intensity modes. The rated power is 1500 watts. The dimensions of the device are small: 16 x 16 x 18 centimeters, which corresponds to the width, depth and height.
Characteristics of a fan heater Electrolux EFH / S-1115
If you are interested in water fan heaters, then you can pay attention to this model, which costs only 1000 rubles. The device works due to the spiral heating element, and the rated power is 1500 watts. The dimensions are slightly larger compared to the device described above and are 17.5 x 13.5 x 25.1 centimeters. Water heaters of this type are purchased by consumers quite often, with their help it is possible to heat a room with an area of 16 square meters. You can warm up the room for a short time, using the necessary power modes.
As the only minus, a fairly high noise level during operation can be used, but it is acceptable. However, almost all fan heaters do this, which is especially true for industrial models. This water heater for the first 2 minutes can give off odors, which then disappear. An additional advantage is that the device does not dry the air.
The main features of the fan heater brand "Teplomash" KEV-40T3.5W3
If you need a more powerful device, then you can purchase water heaters "Teplomash". The aforementioned model, for example, costs 18,500 rubles. This fan heater is intended for heating of administrative, industrial, office and warehouse premises. The installation is universal, that is, the device can be mounted both horizontally and vertically, which expands the scope of use. Water heaters "Teplomash" are mounted using a bracket, which provides the ability to adjust the angle of rotation and tilt of the unit. By means of adjustable blinds it is possible to direct an air stream in the necessary area. Water fan heaters of this type are industrial devices, they are powered by a 220 volt network. Air consumption per hour can vary from 800 to 1600 cubic meters.
The isothermal jet has an effective length of 12 meters. Before purchasing such a device, it is worth considering that it provides for the need for free space, the length, width and height of the fan heater are 480 x 318 x 408 millimeters. Perhaps for the installation work you will need outside help, since the mass of the device is significant and equivalent to 18.5 kilograms.
Some features of Volcano fan heaters
If you liked the Volcano water heater, then you should know about its main advantages. Among them can be identified the lack of need for the use of street air. These devices use the air that is available in the room. With the help of blinds and a special fan, jets of warm air are distributed in 4 directions.
These devices are able to accurately maintain the temperature set by the user. This feature is provided by a temperature sensor, which checks the room temperature every 60 seconds.
Preparation of materials before making a fan heater yourself
Fan heaters with a water source of heat can be made by you yourself if you do not want to purchase the device in a store. For work, you will need a sheet of galvanized steel, a tube for a heat exchanger, two end valves, duct fans and 4 springs for fastening. Experts advise to purchase an additional Mayevsky crane, which is useful for removing air jams.
Necessary tools
Fan heaters with a water heat source cannot be manufactured without the appropriate tool, namely a jigsaw, drills, dies for threading, as well as metal scissors, a ruler and a pencil. If you will manufacture the appliance by connecting to a central heating system, it is recommended to use a 0.5-inch sleeve.
Assembly
In order to assemble a thermal water fan heater, you will first need to make a markup, and then use a metal scissor or grinder to cut a strip of metal, which will allow you to get an impromptu frame. The width of the strip should be equal to the width of the device. The length of this workpiece is equivalent to the four sides of the device. Bend lines should be noted on the strip, and then you can start the process. Opposite sides are connected with rivets or sides, for this you should form a side width of 2 centimeters. From the remnants of the material, a front panel should be made in which openings for air outlet are made. The element is fixed on the front side of the frame.
Methodology
When you make water heaters with your own hands, you will need to fill the copper pipe with sand, close one end and bend the heat exchanger. After that, the element can be freed from sand and blown. A hole is made on the side of the housing for the outlet ends of the heat exchanger. The thread for the coupling must be made on it. Top should install the Mayevsky crane. Now you can assemble the device: the finished case is supplied with a heat exchanger, on both sides its ends must be supplemented with nuts.
A fan should be mounted behind the heat exchanger; for this, holes for installing springs are drilled in the corners of the housing. The fan should be centered on the device. The appliance is mounted on the wall so that there is a gap of 10 centimeters or more between the surface and the heater. Faucets should be connected to the central heating pipes, and connected to the fan through the coupling.